Journal
Article title
Title variants
Languages of publication
Abstracts
The root of single-crystalline turbine blade made of CMSX-4 superalloy were studied. The studied blade was produced by the Bridgman technique in industrial ALD furnace at withdrawal rate of 3 mm/min. The samples for investigations were cut from the blade root parallel to the withdrawal direction. Metallographic sections of longitudinal samples planes were prepared for further investigations. The samples were analysed using scanning electron microscopy and the Laue diffraction studies. The crystal orientations in macro-scale were determined by analysis of the Laue pattern and local crystal orientations were studied by electron backscattered diffraction technique. Morphology of dendrites were examined by analysis of scanning electron microscopy macro-images. Study of subgrain structure was performed by X-ray diffraction topography. The sharp parallel contrast bands, visible on the X-ray topograms, were related with dendrite cores, arranged with the same direction. Additionally, the low angle boundaries were formed in certain samples, visible on the topograms as contrast shifts. Step changes of local crystal orientation in certain areas were observed on the electron backscattered diffraction maps. The electron backscattered diffraction crystal orientation maps were related to the misorientation visualized in topograms.
Discipline
- 61.72.Ff: Direct observation of dislocations and other defects (etch pits, decoration, electron microscopy, x-ray topography, etc.)
- 61.05.J-: Electron diffraction and scattering(for electron diffractometers, see 07.78.+s)
- 81.10.Aj: Theory and models of crystal growth; physics and chemistry of crystal growth, crystal morphology, and orientation(see also 61.50.Nw Crystal stoichiometry)
Journal
Year
Volume
Issue
Pages
1104-1106
Physical description
Dates
published
2016-10
Contributors
author
- Institute of Materials Science, University of Silesia, 75 Pułku Piechoty 1A, 41-500 Chorzów, Poland
author
- Institute of Materials Science, University of Silesia, 75 Pułku Piechoty 1A, 41-500 Chorzów, Poland
author
- Institute of Materials Science, University of Silesia, 75 Pułku Piechoty 1A, 41-500 Chorzów, Poland
author
- Institute of Materials Science, University of Silesia, 75 Pułku Piechoty 1A, 41-500 Chorzów, Poland
author
- Department of Materials Science, Rzeszów University of Technology, W. Pola 2, 35-959 Rzeszów, Poland
References
- [1] R. Reed, The Superalloys: Fundamentals and Application, Cambridge University Press, Cambridge 2006, doi: 10.1017/CBO9780511541285
- [2] M.J. Donachie, S.J. Donachie, Superalloys. A Technical Guide, ASM International, Materials Park (OH) 2002
- [3] J.C. Williams, E.A. Strake, Acta Mater. 51, 5775 (2003), doi: 10.1016/j.actamat.2003.08.023
- [4] D. Shi, J. Huang, X. Yang, H. Yu, Int. J. Fatigue 49, 31 (2013), doi: 10.1016/j.ijfatigue.2012.12.005
- [5] Z. Wen, H. Mao, Z. Yue, J.B. Wang, J. Mater. Eng. Perform. 23, 372 (2014), doi: 10.1007/s11665-013-0772-z
- [6] W. Bogdanowicz, R. Albrecht, J. Sieniawski, K. Kubiak, J. Cryst. Growth 401, 418 (2014), doi: 10.1016/j.jcrysgro.2013.11.092
- [7] W. Bogdanowicz, Scr. Mater. 37, 6 (1997), doi: 10.1016/S1359-6462(97)00169-3
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv130n484kz