PL EN


Preferences help
enabled [disable] Abstract
Number of results
2016 | 130 | 4 | 1097-1099
Article title

Characterizing the Effects of Hot Isostatic Pressing on IN713C Superalloy Blade Microstructure by Electron Backscatter Diffraction

Content
Title variants
Languages of publication
EN
Abstracts
EN
The integrity of turbine blades is essential for the safe operation of jet engines. Thus, the mechanical properties, especially creep resistance and fatigue strength at high temperatures, must be thoroughly optimized. In particular, it has previously been observed that the mechanical properties of blades depend on the microstructure and porosity resulting from the casting process. To decrease the internal porosity generated by investment casting, hot isostatic pressing can be applied. This paper aims to evaluate the effects of hot isostatic pressing on the microstructure of IN713C alloy blades. Two variants of hot isostatic pressing treatment, differing in pressure, were carried out, and each resulted in lowered porosity. Microstructural investigations, performed using scanning electron microscopy and electron backscatter diffraction revealed significant changes of γ' particles and high strain intensity in the surface layer of the blades after hot isostatic pressing treatment.
Keywords
Contributors
author
  • Institute of Materials Science, Faculty of Materials Engineering and Metallurgy, Silesian University of Technology, Katowice, Poland
  • Institute of Materials Science, Faculty of Materials Engineering and Metallurgy, Silesian University of Technology, Katowice, Poland
author
  • Institute of Materials Science, Faculty of Materials Engineering and Metallurgy, Silesian University of Technology, Katowice, Poland
References
  • [1] R.C. Reed, Superalloys. Fundamentals and Applications, Cambridge University Press, Cambridge 2006, doi: 10.1017/CBO9780511541285
  • [2] M. Durand-Charre, The Microstructure of Superalloys, Gordon and Breach Sci. Publ., Amsterdam 1997
  • [3] Superalloys. A technical guide, Eds. M.J. Donachie, S.J. Donachie, ASM International, Materials Park (OH) 2002
  • [4] Modelling for Casting and Solidification Processing, Ed. Yu Kuang-O (Oscar), Marcel Dekker, New York 2002
  • [5] L. Kunz, P. Lukáš, R. Konečná, S. Fintová, Int. J. Fatigue 41, 47 (2012), doi: 10.1016/j.ijfatigue.2011.12.002
  • [6] S.-H. Chang, J. Alloys Comp. 486, 716 (2009), doi: 10.1016/j.jallcom.2009.07.046
  • [7] K.-O. Lee, S.-B. Lee, Mater. Sci. Eng. A 541, 81 (2012), doi: 10.1016/j.msea.2012.02.005
  • [8] Y. Zhou, S. Rao, Z. Zhang, Z. Zhao,Mater. Des. 49, 25 (2013), doi: 10.1016/j.matdes.2013.01.055
  • [9] S. Roskosz, M. Staszewski, J. Cwajna, Mater. Charact. 56, 406 (2006), doi: 10.1016/j.matchar.2005.11.005
  • [10] S. Roskosz, J. Adamiec, Mater. Charact. 60, 1120 (2009), doi: 10.1016/j.matchar.2009.01.024
  • [11] S. Roskosz, Comprehensive Evaluation of Porosity of Precision Castings Made of High-Temperature Creep Resisting Nickel Superalloys, Silesian University of Technology Publ. Co., Gliwice 2011 (in Polish)
  • [12] S. Zlá, B. Smetana, M. Žaludová, J. Dobrovská, V. Vodárek, K. Konečná, V. Matějká, H. Francová, J. Thermal Anal. Cal. 110, 211 (2012), doi: 10.1007/s10973-012-2304-8
  • [13] H. Takagi, M. Fujiwara, K. Kakehi, Mater. Sci. Eng. A 387, 348 (2004), doi: 10.1016/j.msea.2004.01.061
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv130n482kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.