PL EN


Preferences help
enabled [disable] Abstract
Number of results
2016 | 130 | 4 | 1094-1096
Article title

Effect of Creep on Crystallographic Orientation in Single Crystal Superalloy

Content
Title variants
Languages of publication
EN
Abstracts
EN
The creep-rupture tests were performed on a single crystal rods made of CMSX-4 superalloy obtained at withdrawal rates of 3 and 5 mm/min. After the rupture the microstructure and fracture surface were examined and correlated with X-ray crystal rotation measurements by the Ω-scan method. The conclusions about the crystal lattice rotation during creep test were provided.
Keywords
EN
Contributors
author
  • University of Silesia, Institute of Materials Science, 75 Pułku Piechoty 1A, 41-500 Chorzów, Poland
author
  • University of Silesia, Institute of Materials Science, 75 Pułku Piechoty 1A, 41-500 Chorzów, Poland
  • University of Silesia, Institute of Materials Science, 75 Pułku Piechoty 1A, 41-500 Chorzów, Poland
author
  • Rzeszów University of Technology, Department of Materials Science, W. Pola 2, 35-959 Rzeszów, Poland
author
  • Rzeszów University of Technology, Department of Materials Science, W. Pola 2, 35-959 Rzeszów, Poland
author
  • Rzeszów University of Technology, Department of Materials Science, W. Pola 2, 35-959 Rzeszów, Poland
author
  • University of Silesia, Institute of Materials Science, 75 Pułku Piechoty 1A, 41-500 Chorzów, Poland
References
  • [1] B. Geddes, H. Leon, X. Huang, Superalloys Alloying and Performance, ASM International, USA 2010
  • [2] R.W. Broomfield, D.A. Ford, J.K. Bhangu, M.C. Thomas, D.J. Frasier, P.S. Burkholder, K. Harris, G.L. Erickson, J.B. Wahl, J. Eng. Gas Turbines Power 120, 595 (1998), doi: 10.1115/1.2818188
  • [3] Creep Properties of Heat Resistant Steels and Superalloys, Eds. K. Yagi, G. Merckling, T.-U. Kern, H. Irie, H. Warlimont, Landolt-Börnstein, 2004, doi: 10.1007/b80641
  • [4] S.S.K. Gunturi, D.W. MacLachlan, D.M. Knowles, Mater. Sci. Eng. A 289, 289 (2000)
  • [5] K. Kakehi, F.H. Latief, T. Sato, Mater. Sci. Eng. A 604, 148 (2014), doi: 10.1016/j.msea.2014.02.079
  • [6] V. Sass, U. Glatzel, M. Feller-Kniepmeier, Superalloys 1996, Eds. R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, D.A. Woodford, The Minerals, Metals & Materials Society, 1996, p. 283, doi: 10.7449/1996/Superalloys_1996_283_290
  • [7] S. Kalluri, A. Abdul-Aziz, M. McGaw, NASA Technical Memorandum 106125, 1993
  • [8] J. Ghighi, J. Cormier, E. Ostoja-Kuczynski, J. Mendez, G. Cailletaud, F. Azzouz, Technische Mech. 32, 205 (2012) (in German)
  • [9] D.W. MacLachlan, L.W. Wright, S. Gunturi, D.M. Knowles, Int. J. Plasticity 17, 441 (2001), doi: 10.13140/RG.2.1.2847.5768
  • [10] P.E. McHugh, R. Mohrmann, Comput. Mater. Sci. 9, 134 (1997), doi: 10.1016/S0927-0256(97)00067-0
  • [11] H. Berger, H.-A. Bradaczek, H. Bradaczek, J. Mater. Sci. Mater. Electron. 19, 351 (2008), doi: 10.1007/s10854-007-9479-y
  • [12] G. Hildebrandt, H. Bradaczek, J. Optoelectron. Adv. Mater. 6, 5 (2004)
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv130n481kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.