Structure of Chitosan-ZnO Layers Electrophoretically Deposited on NiTi Shape Memory Alloy

• Authors: T. Goryczka , A. Kokoszka , P. Kowalski , B. Łosiewicz
• Languages of publication: EN

Abstracts

EN

The surface of NiTi shape memory was modified by deposition of chitosan-ZnO thin film. The electrodeposition process was carried out at room temperature at voltage-time conditions: 10 V/30 s, 10 V/300 s, 20 V/30 s, or 20 V/300 s. Structure of the obtained coatings was studied by means of grazing incidence beam X-ray diffraction. Distribution of the zinc oxide particles in the chitosan matrix was observed with use of scanning electron microscopy. It was found that depending on the electrodeposition parameters, the structure of the obtained chitosan-ZnO coatings varies from amorphous to coarse-grained.

Keywords

EN

61.10.Nz; 61.66.Dk; 68.37.Hk; 81.30.Kf; 87.68.+z

Discipline

• 68.37.Hk: Scanning electron microscopy (SEM) (including EBIC)
• 61.66.Dk: Alloys
• 81.30.Kf: Martensitic transformations

• Journal: Acta Physica Polonica A
• Year: 2016
• Volume: 130
• Issue: 4
• Pages: 1056-1058

Dates

published

2016-10

Contributors

author

T. Goryczka

• University of Silesia, Institute of Materials Science, Silesian Center for Education and Interdisciplinary Research, 75 Pułku Piechoty 1A, 41-500 Chorzów, Poland

author

A. Kokoszka

• University of Silesia, Institute of Materials Science, Silesian Center for Education and Interdisciplinary Research, 75 Pułku Piechoty 1A, 41-500 Chorzów, Poland

author

P. Kowalski

• University of Silesia, Institute of Materials Science, Silesian Center for Education and Interdisciplinary Research, 75 Pułku Piechoty 1A, 41-500 Chorzów, Poland

author

B. Łosiewicz

• University of Silesia, Institute of Materials Science, Silesian Center for Education and Interdisciplinary Research, 75 Pułku Piechoty 1A, 41-500 Chorzów, Poland

References

• [1] L. Yahia, Shape Memory Implants, Springer-Verlag, Berlin 2000, doi: 10.1007/978-3-642-59768-8
• [2] T. Tadaki, K. Otsuka, K. Shimizu, Ann. Rev. Mater. Sci. 18, 25 (1988), doi: 10.1146/annurev.ms.18.080188.000325
• [3] T. Goryczka, K. Dudek, B. Szaraniec, Ł. Zych, M. Freitag, J. Lelatko, Eng. Biomater. 106-108, 124 (2011) http://www.biomat.krakow.pl/gazeta/archiwum/106-108F.pdf
• [4] J. Lelątko, T. Goryczka, T. Wierzchoń, M. Ossowski, B. Łosiewicz, E. Rowiński, H. Morawiec, Solid State Phenom. 163, 127 (2010), doi: 10.4028/www.scientific.net/SSP.163.127
• [5] K. Dudek, B. Szaraniec, J. Lelątko, T. Goryczka, Solid State Phenom. 203-204, 90 (2013), doi: 10.4028/www.scientific.net/SSP.203-204.90
• [6] H. Tang, P. Zhang, T.L. Kieft, S.H. Ryan, S.M. Baker, W.P. Wiesmann, S. Rogelj, Acta Biomater. 6, 2562 (2010), doi: 10.1016/j.actbio.2010.01.002
• [7] E.I. Rabea, M.E. Badawy, C.V. Stevens, G. Smagghe, W. Steurbaut, Biomacromolecules 4, 457 (2003), doi: 10.1021/bm034130m
• [8] H. Ueno, T. Mori, T. Fujinaga, Adv. Drug Deliv. Rev. 52, 105 (2001), doi: 10.1016/S0169-409X(01)00189-2
• [9] H. Esmailzadeh, P. Sangpour, F. Shahraz, J. Hejazi, R. Khaksar, Mater. Sci. Eng. C 58, 1058 (2016), doi: 10.1016/j.msec.2015.09.078
• [10] S.M. Dizaj, F. Lotfipour, M. Barzegar-Jalali, M.H. Zarrintan, K. Adibkia, Mater. Sci. Eng. C 44, 278 (2014), doi: 10.1016/j.msec.2014.08.031
• [11] M. Cepin, G. Hribar, S. Caserman, Z.C. Orel, Mater. Sci. Eng. C 52, 204 (2015), doi: 10.1016/j.msec.2015.03.053
• [12] P. Kowalski, B. Łosiewicz, T. Goryczka, Solid State Phenom. 203-204, 236 (2013), doi: 10.4028/www.scientific.net/SSP.203-204.236
• [13] P. Kowalski, B. Łosiewicz, T. Goryczka, Archiv. Metall. Mater. 60, 171 (2015), doi: 10.1515/amm-2015-0027
• [14] K. Ogawa, S. Inukai, Carbohydr. Res. 160, 425 (1987), doi: 10.1016/0008-6215(87)80328-2

Identifiers

DOI

10.12693/APhysPolA.130.1056