Effect of Asymmetric Cold Rolling on Texture of a Commercially Pure Copper

• Authors: A. Uniwersał , M. Wróbel , K. Wierzbanowski , M. Wroński
• Languages of publication: EN

Abstracts

EN

This study deals with the influence of the rolling asymmetry and applied strain on the crystallographic texture of polycrystalline copper. It was shown that textures of asymmetrically rolled materials are rotated with respect to those rolled symmetrically and the rotation angle increases both with the rolling asymmetry and strain. The asymmetric rolling leads also to a decrease of intensity of texture components forming skeleton lines in the orientation space. However, individual texture components exhibit different sensitivity to the effect of asymmetric rolling.

Keywords

EN

81.40.Ef

Discipline

• 81.40.Ef: Cold working, work hardening; annealing, post-deformation annealing, quenching, tempering recovery, and crystallization

• Journal: Acta Physica Polonica A
• Year: 2016
• Volume: 130
• Issue: 4
• Pages: 1049-1052

Dates

published

2016-10

Contributors

author

A. Uniwersał

• Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, al. A. Mickiewicza 30, 30-059 Kraków, Poland

author

M. Wróbel

• Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, al. A. Mickiewicza 30, 30-059 Kraków, Poland

author

K. Wierzbanowski

• Faculty of Physics and Applied Computer Science, AGH University of Science and Technology, al. A. Mickiewicza 30, 30-059 Kraków, Poland

author

M. Wroński

• Faculty of Physics and Applied Computer Science, AGH University of Science and Technology, al. A. Mickiewicza 30, 30-059 Kraków, Poland

References

• [1] A. Uniwersał, M. Wróbel, S. Wroński, I. Kalemba-Rec, M. Wroński, K. Wierzbanowski, A. Baczmański, B. Bacroix, Arch. Metall. Mater. 61, (2016), doi: 10.1515/amm-2016-0349
• [2] E.A. Maksimov, Metallurgist 54, 753 (2011), doi: 10.1007/s11015-011-9370-1
• [3] P.P. Gudur, M.A. Salunkhe, U.S. Dixit, Int. J. Mech. Sci. 50, 315 (2008), doi: 10.1016/j.ijmecsci.2007.06.002
• [4] Y. Pang, Y. Hu, Q. Sun, Ch. Liu, Adv. Mater. Res. 97-101, 597 (2010), doi: 10.4028/www.scientific.net/AMR.97-101.597
• [5] F. Farthatnia, M. Salimi, Int. J. Eng. Sci. Technol. 3, 147 (2011), doi: 10.4314/ijest.v3i4.68550
• [6] S.A.A. Akbari Mousavi, S.M. Ebrahimi, R. Madoliat, J. Mater. Process. Tech. 187-188, 725 (2007), doi: 10.1016/j.jmatprotec.2006.11.045
• [7] J.-S. Lu, O.-K. Harrer, W. Schwenzfeier, F.D. Fisher, Int. J. Mech. Sci. 42, 49 (2000), doi: 10.1016/S0020-7403(98)00112-X
• [8] A. Kawałek, Achiev. Mater. Manufact. Eng. 23, 63 (2007)
• [9] M. Wroński, K. Wierzbanowski, S. Wroński, B. Bacroix, M. Wróbel, A. Uniwersał, Mater. Sci. Eng. 82, 012074 (2015), doi: 10.1088/1757-899X/82/1/012074
• [10] M. Wroński, K. Wierzbanowski, A. Baczmanski, S. Wroński, B. Bacroix, M. Wróbel, A. Lodini, Adv. Mater. Res. 996, 688 (2014), doi: 10.4028/www.scientific.net/AMR.996.688
• [11] M. Wroński, K. Wierzbanowski, S. Wroński, B. Bacroix, Met. Mater. Int. 21, 805 (2015), doi: 10.1007/s12540-015-5094-2
• [12] S. Wroński, K. Wierzbanowski, B. Bacroix, Ch. Thierry, M. Wróbel, J. Cent. South Univ. T. 20, 1443 (2013)
• [13] S. Wroński, K. Wierzbanowski, B. Bacroix, M. Wróbel, Mater. Sci. Forum 638-642, 2811 (2010), doi: 10.1007/s11771-013-1633-5
• [14] M. Wroński, K. Wierzbanowski, L. Pytlik, B. Bacroix, M. Wróbel, A. Baczmański, A. Lodini, Mater. Sci. Forum 777, 1 (2014), doi: 10.4028/www.scientific.net/MSF.777.1
• [15] S. Wroński, K. Wierzbanowski, B. Bacroix, T. Chauveau, M. Wróbel, A. Rauch, F. Montheillet, M. Wroński, Arch. Metall. Mater. 54, 89 (2009)
• [16] K. Wierzbanowski, A. Baczmanski, P. Lipinski, A. Lodini, Arch. Metall. Mater. 52, 77 (2007)
• [17] A. Baczmański, A. Tidu, P. Lipinski, M. Humbert, K. Wierzbanowski, Mater. Sci. Forum 524-525, 235 (2006), doi: 10.4028/www.scientific.net/MSF.524-525.235
• [18] A. Baczmański, K. Wierzbanowski, J. Tarasiuk, M. Ceretti, A. Lodini, Rev. Metall. - Paris 94, 1467 (1997)
• [19] H.J. Bunge, Texture Analysis in Materials Science, Butterworths, London 1982, doi: 10.13140/RG.2.1.1721.1041
• [20] LaboTex, Software for Texture Analysis, Labosoft s.c., Kraków 2014
• [21] O. Engler, V. Randle, Introduction to Texture Analysis, Macrotexture, Microtexture and Orientation Mapping, 2nd ed., CRC Press, Boca Raton 2010, p. 3
• [22] H.J. Bunge, in: Preferred Orientation in Deformed Metal and Rocks: An Introduction to Modern Texture Analysis, Ed. H.-R. Wenk, Academic Press, London 1985, p. 107
• [23] A.D. Rollett, S.I. Wright, in: Texture and Anisotropy, Preferred Orientations in Polycrystals and their Effect on Materials Properties, Eds. U.F. Kocks et al., Cambridge University Press, 2000, p. 185
• [24] J. Hirsch, K. Lucke, Acta Metall. 36, 2863 (1988), doi: 10.1016/0001-6160(88)90172-1
• [25] J. Hirsch, K. Lucke, Acta Metall. 36, 2905 (1988), doi: 10.1016/0001-6160(88)90174-5
• [26] T. Leffers, R.K. Ray, Prog. Mater. Sci. 54, 351 (2009), doi: 10.1016/j.pmatsci.2008.09.002
• [27] W. Olek, J.T. Bonarski, BioResources 7, 1729 (2012), doi: 10.15376/biores.7.2.1729-1739
• [28] M. Wróbel, J. Pospiech, J. Bonarski, M. Blicharski, S. Dymek, Archiv. Metall. 47, 185 (2002)
• [29] K. Wierzbanowski, A. Clement, Cryst. Res. Technol. 19, 202 (1984), doi: 10.1002/crat.2170190211
• [30] M. Wróbel, W. Łatas, Archiv. Metall. 40, 333 (1995)
• [31] M. Wróbel, S. Dymek, M. Blicharski, Archiv. Metall. 35, 245 (1990)
• [32] M. Wróbel, S. Dymek, M. Blicharski, Zeit. Metallkd. 85, 415 (1994)
• [33] G.E.G. Tucker, Acta Metall. 12, 1093 (1964), doi: 10.1016/0001-6160(64)90083-5
• [34] M. Wróbel, Ph.D. Thesis, AGH, Kraków 1989

Identifiers

DOI

10.12693/APhysPolA.130.1049