Analysis of Phase Transformations in Inconel 625 Alloy during Annealing

Petrzak, P.; Kowalski, K.; Blicharski, M.

doi:10.12693/APhysPolA.130.1041

Journal

Acta Physica Polonica A

2016 | 130 | 4 | 1041-1044

Article title

Analysis of Phase Transformations in Inconel 625 Alloy during Annealing

Authors

P. Petrzak , K. Kowalski , M. Blicharski

Content

Full texts:

http://przyrbwn.icm.edu.pl/APP/PDF/130/a130z4p65.pdf [remote]

Title variants

Languages of publication

Abstracts

The investigation focused on the characterization of the microstructure and chemical composition changes after annealing. The research was conducted on the Inconel 625 weld overlay deposited on a boiler steel. The annealing was performed for 10 h at temperatures from 600 to 1000°C. The microstructure and chemical composition were examined by scanning electron microscope and transmission electron microscope equipped with an energy dispersive X-ray spectrometer. Weld overlays were produced by an innovative method of cold metal transfer.

Keywords

61.66.Dk 64.75.Nx 81.05.Bx 81.30.Fb

Discipline

Publisher

Institute of Physics, Polish Academy of Sciences

Journal

Acta Physica Polonica A

Year

2016

Volume

130

Issue

Pages

1041-1044

Physical description

Dates

published

2016-10

Contributors

author

P. Petrzak

Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, al. A. Mickiewicza 30, 30-059 Krakow, Poland

author

K. Kowalski

Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, al. A. Mickiewicza 30, 30-059 Krakow, Poland

author

M. Blicharski

Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, al. A. Mickiewicza 30, 30-059 Krakow, Poland

References

[1] J.N. DuPont, J.C. Lippold, S.D. Kiser, Welding Metallurgy and Weldability of Nickel-Base Alloys, Wiley, New Jersey 2009
[2] B. Mikułowski, Heat and creep resistant alloys, Wyd. AGH, Kraków 1997
[3] B. Dubiel, Changes in microstructure during creep monocrystalline nickel superalloys, monograph, 2011
[4] E. Gozlan, M. Bamberger, S.F. Dirnfeld, B. Prinz, J. Klodt, Mater. Sci. Eng. A 141, 85 (1991), doi: 10.1016/0921-5093(91)90712-V
[5] A. Hernas, Creep resistant steels and alloys, Wydawnictwo Politechniki Śląskiej, Gliwice 1999
[6] X. Xing, X. Di, B. Wang, J. Alloys Comp. 593, 110 (2014), doi: 10.1016/j.jallcom.2013.12.224
[7] M. Rozmus-Górnikowska, M. Blicharski, J. Kusiński, L. Kusiński, M. Marszycki, Archiv. Metall. Mater. 58, 1093 (2013), doi: 10.2478/amm-2013-0131
[8] J. Adamiec, Mater. Charact. 60, 1093 (2009), doi: 10.1016/j.matchar.2009.03.017
[9] J.N. DuPont, Metall. Mater. Trans. A 27, 3612 (1996)
[10] V. Shankar, K. Bhanu Sankara Rao, S.L. Mannan, J. Nucl. Mater. 288, 222 (2001), doi: 10.1016/S0022-3115(00)00723-6
[11] S.W. Banovic, J.N. DuPont, A.R. Marder, Sci. Technol. Weld. Joining 7, 374 (2002), doi: 10.1179/10.1179/136217102225006804
[12] Q. Guo, D. Li, H. Peng, S. Guo, J. Hu, P. Du, Rare Met. 31, 215 (2012), doi: 10.1007/s12598-012-0494-7
[13] H.M. Tawancy, N.M. Allam, J. Mater. Sci. Lett. 9, 343 (1990)
[14] Fronius International [access: 1 November 2015] http://www.fronius.com/cps/rde/xchg/fronius_international/hs.xsl/79_9399_ENG_HTML.htm
[15] C.G. Pickin, S.W. Williams, M. Lunt, J. Mater. Process. Technol. 211, 496 (2011), doi: 10.1016/j.jmatprotec.2010.11.005

Document Type

Publication order reference

Identifiers

DOI

10.12693/APhysPolA.130.1041

YADDA identifier

bwmeta1.element.bwnjournal-article-appv130n465kz