Influence of High Energy Milling Time on the Ti-50Ta Biomedical Alloy Structure

• Authors: I. Matuła , G. Dercz , M. Zubko , K. Prusik , L. Pająk
• Languages of publication: EN

Abstracts

EN

Nickel-free titanium alloys are a promising research direction in the field of biomedical materials. Current literature reports indicate that there is a possibility of using the Ti-Ta alloys in medicine since these alloys have had satisfactory results as far as biocompatibility, resistance to corrosion and mechanical properties are concerned, which is an important aspect while considering the use of this alloy for long-lasting bone implants. This article presents the results of a high-energy milling process with the use of Ti and Ta powders. The ball-milling process was carried out for various times, including 20, 40, 60, 80, and 100 h. The samples were characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The research confirmed partial synthesis of the materials during the process of high energy ball milling.

Keywords

EN

87.85.J-; 81.05.Zx; 81.07.Wx; 81.20.Ev

Discipline

• 81.07.Wx: Nanopowders
• 81.20.Ev: Powder processing: powder metallurgy, compaction, sintering, mechanical alloying, and granulation
• 87.85.J-: Biomaterials
• 81.05.Zx: New materials: theory, design, and fabrication

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2016
• Volume: 130
• Issue: 4
• Pages: 1033-1036

Dates

published

2016-10

Contributors

author

I. Matuła

• Institute of Materials Science, University of Silesia, 75 Pułku Piechoty 1A, 41-500 Chorzów, Poland

author

G. Dercz

• Institute of Materials Science, University of Silesia, 75 Pułku Piechoty 1A, 41-500 Chorzów, Poland

author

M. Zubko

• Institute of Materials Science, University of Silesia, 75 Pułku Piechoty 1A, 41-500 Chorzów, Poland

author

K. Prusik

• Institute of Materials Science, University of Silesia, 75 Pułku Piechoty 1A, 41-500 Chorzów, Poland

author

L. Pająk

• Institute of Materials Science, University of Silesia, 75 Pułku Piechoty 1A, 41-500 Chorzów, Poland

References

• [1] G. He, M. Hagiwara, Mater. Sci. Eng. C 26, 14 (2006), doi: 10.1016/j.jmbbm.2012.11.014
• [2] M. Sowa, A. Kazek-Kęsik, R.P. Socha, G. Dercz, J. Michalska, W. Simka, Electrochim. Acta 114, 627 (2013), doi: 10.1016/j.electacta.2013.10.047
• [3] A. Biesiekierski, J. Wang, M.A.-H. Gepreel, C. Wen, Acta Biomater. 8, 1661 (2012), doi: 10.1016/j.actbio.2012.01.018
• [4] P.J.S. Buenconsejo, H.Y. Kim, H. Hosoda, S. Miyazaki, Acta Mater. 57, 1068 (2009), doi: 10.1016/j.actamat.2008.10.041
• [5] D. Mareci, R. Chelariu, D.-M. Gordin, G. Ungureanu, T. Gloriant, Acta Biomater. 5, 3625 (2009), doi: 10.1016/j.actbio.2009.05.037
• [6] Y.-L. Zhou, M. Niinomi, Mater. Sci. Eng. C 29, 1061 (2009), doi: 10.1016/j.msec.2008.09.012
• [7] Y.-L. Zhou, M. Niinomi, J. Alloys Comp. 466, 535 (2008), doi: 10.1016/j.jallcom.2007.11.090
• [8] Y.-L. Zhou, M. Niinomi, T. Akahori, Mater. Sci. Eng. A 371, 283 (2004), doi: 10.1016/j.msea.2003.12.011
• [9] Y. Liu, K. Li, H. Wu, M. Song, W. Wang, N. Li, H. Tang, J. Mech. Behav. Biomed. Mater. 51, 302 (2015), doi: 10.1016/j.jmbbm.2015.07.004
• [10] H.M. Rietveld, J. Appl. Crystallogr. 3, 65 (1969), doi: 10.1107/S0021889869006558
• [11] D.B. Wiles, R.A. Young, J. Appl. Cryst. 14, 149 (1981), doi: 10.1107/S0021889881008996
• [12] The Rietveld Method, Ed. R.A. Young, Oxford Univ. Press, New York 1993, doi: 10.1002/crat.2170300412
• [13] R.J. Hill, C.J. Howard, J Appl. Crystallogr. 20, 467 (1987), doi: 10.1107/S0021889887086199
• [14] G. Dercz, D. Oleszak, K. Prusik, L. Pająk, Rev. Adv. Mater. Sci. 8, 764 (2008)
• [15] G.K. Williamson, W.H. Hall, Acta Metall. 1, 22 (1953), doi: 10.1016/0001-6160(53)90006-6
• [16] L. Lü, M.O. Lai, Mechanical Alloying, Kluwer Academic, Boston 1998, doi: 10.1007/978-1-4615-5509-4

Identifiers

DOI

10.12693/APhysPolA.130.1033