Modification of the Al-9%SiMg Alloy with Aluminum, Boron, and Titanium Fast Cooled Mixtures

• Authors: T. Lipiński
• Languages of publication: EN

Abstracts

EN

The mechanical properties of hypoeutectic silumins can be improved through chemical modification as well as chemical elements or technological processing. This study presents the results of modification of an Al-9%SiMg alloy with aluminium, boron, and titanium. The experiments were conducted following a factor design 2³ for 3 independent variables. The influence of the analyzed modifiers on the microstructure and mechanical properties of the processed alloy was presented in graphs. The modification of a hypoeutectic Al-9%SiMg alloy improved the alloy's properties. The results of the tests indicate that the mechanical properties of the modified alloy are determined by the components introduced to the alloy.

Keywords

EN

81.40.-z

Discipline

• 81.40.-z: Treatment of materials and its effects on microstructure, nanostructure, and properties

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2016
• Volume: 130
• Issue: 4
• Pages: 982-984

Dates

published

2016-10

Contributors

author

T. Lipiński

• University of Warmia and Mazury in Olsztyn, Faculty of Technical Sciences, St. Oczapowskiego 11, 10-957 Olsztyn, Poland

References

• [1] R. Cupryś, B. Major, W. Wołczyński, Mater. Sci. Forum 329-330, 161 (2000)
• [2] W. Kurz, D.J. Fisher, Fundamentals of Solidifications, Trans Tech Publ., 1992
• [3] W. Pilarczyk, Cryst. Res. Technol. 50, 700 (2015), doi: 10.1002/crat.201400438
• [4] J. Selejdak, R. Ulewicz, M. Ingaldi, in: Proc. 23rd Int. Conf. on Metallurgy and Materials, Ostrava 2014, p. 1882
• [5] Z. Poniewierski, Crystallization, Structure and Silumin Properties, WNT, Warsaw 1989
• [6] W. Wołczyński, E. Guzik, W. Wajda, D. Jędrzejczyk, B. Kania, M. Kostrzewa, Archiv. Metall. Mater. 57, 105 (2012), doi: 10.2478/v10172-011-0159-9
• [7] Ł. Rogal, J. Dutkiewicz, A. Góral, B. Olszowska-Sobieraj, J. Dańko, Int. J. Mater. Form. 3, 771 (2010), doi: 10.1007/s12289-010-0884-z
• [8] S.J. Grauer, E.J.F.R. Caron, N.L. Chester, M.A. Wells, K.J. Daun, J. Mater. Process. Technol. 216, 89 (2015), doi: 10.1016/j.jmatprotec.2014.09.001
• [9] T. Lipiński, Archiv. Metall. Mater. 60, 329 (2015), doi: 10.1515/amm-2015-0394
• [10] T. Lipiński, Archiv. Metall. Mater. 53, 193 (2008)
• [11] T. Lipinski, P. Szabracki, Archiv. Metall. Mater. 58, 453 (2013), doi: 10.2478/amm-2013-0017
• [12] J. Pietraszek, E. Skrzypczak-Pietraszek, Adv. Mater. Res. 874, 151 (2014), doi: 10.4028/www.scientific.net/AMR.874.151
• [13] W. Pilarczyk, A. Pilarczyk, Mater. Techn. 49, 537 (2015), doi: 10.17222/mit.2014.140
• [14] A. Wrobel, B. Kucharska, Arch. Metall. Mater. 55, 205 (2010)
• [15] W. Wołczyński, R. Cupryś, B. Major, Archiv. Metall. 43, 309 (1998)
• [16] O. Kon, U. Sen, Acta Phys. Pol. A 127, 1214 (2015), doi: 10.12693/APhysPolA.127.1214

Identifiers

DOI

10.12693/APhysPolA.130.982