PL EN


Preferences help
enabled [disable] Abstract
Number of results
2016 | 130 | 4 | 982-984
Article title

Modification of the Al-9%SiMg Alloy with Aluminum, Boron, and Titanium Fast Cooled Mixtures

Authors
Content
Title variants
Languages of publication
EN
Abstracts
EN
The mechanical properties of hypoeutectic silumins can be improved through chemical modification as well as chemical elements or technological processing. This study presents the results of modification of an Al-9%SiMg alloy with aluminium, boron, and titanium. The experiments were conducted following a factor design 2³ for 3 independent variables. The influence of the analyzed modifiers on the microstructure and mechanical properties of the processed alloy was presented in graphs. The modification of a hypoeutectic Al-9%SiMg alloy improved the alloy's properties. The results of the tests indicate that the mechanical properties of the modified alloy are determined by the components introduced to the alloy.
Keywords
EN
Publisher

Year
Volume
130
Issue
4
Pages
982-984
Physical description
Dates
published
2016-10
Contributors
author
  • University of Warmia and Mazury in Olsztyn, Faculty of Technical Sciences, St. Oczapowskiego 11, 10-957 Olsztyn, Poland
References
  • [1] R. Cupryś, B. Major, W. Wołczyński, Mater. Sci. Forum 329-330, 161 (2000)
  • [2] W. Kurz, D.J. Fisher, Fundamentals of Solidifications, Trans Tech Publ., 1992
  • [3] W. Pilarczyk, Cryst. Res. Technol. 50, 700 (2015), doi: 10.1002/crat.201400438
  • [4] J. Selejdak, R. Ulewicz, M. Ingaldi, in: Proc. 23rd Int. Conf. on Metallurgy and Materials, Ostrava 2014, p. 1882
  • [5] Z. Poniewierski, Crystallization, Structure and Silumin Properties, WNT, Warsaw 1989
  • [6] W. Wołczyński, E. Guzik, W. Wajda, D. Jędrzejczyk, B. Kania, M. Kostrzewa, Archiv. Metall. Mater. 57, 105 (2012), doi: 10.2478/v10172-011-0159-9
  • [7] Ł. Rogal, J. Dutkiewicz, A. Góral, B. Olszowska-Sobieraj, J. Dańko, Int. J. Mater. Form. 3, 771 (2010), doi: 10.1007/s12289-010-0884-z
  • [8] S.J. Grauer, E.J.F.R. Caron, N.L. Chester, M.A. Wells, K.J. Daun, J. Mater. Process. Technol. 216, 89 (2015), doi: 10.1016/j.jmatprotec.2014.09.001
  • [9] T. Lipiński, Archiv. Metall. Mater. 60, 329 (2015), doi: 10.1515/amm-2015-0394
  • [10] T. Lipiński, Archiv. Metall. Mater. 53, 193 (2008)
  • [11] T. Lipinski, P. Szabracki, Archiv. Metall. Mater. 58, 453 (2013), doi: 10.2478/amm-2013-0017
  • [12] J. Pietraszek, E. Skrzypczak-Pietraszek, Adv. Mater. Res. 874, 151 (2014), doi: 10.4028/www.scientific.net/AMR.874.151
  • [13] W. Pilarczyk, A. Pilarczyk, Mater. Techn. 49, 537 (2015), doi: 10.17222/mit.2014.140
  • [14] A. Wrobel, B. Kucharska, Arch. Metall. Mater. 55, 205 (2010)
  • [15] W. Wołczyński, R. Cupryś, B. Major, Archiv. Metall. 43, 309 (1998)
  • [16] O. Kon, U. Sen, Acta Phys. Pol. A 127, 1214 (2015), doi: 10.12693/APhysPolA.127.1214
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv130n447kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.