Optimization of the Inter-Operation Annealing of Cold-Drawn Eutectoid Steels

• Authors: D. Grygier , M. Rutkowska-Gorczyca , A. Żak , R. Jasiński
• Languages of publication: EN

Abstracts

EN

The test of the results presented in this paper has demonstrated that the most suitable recrystallizing annealing temperature for cold drawn eutectoid steels is 700°C. The microscopic examinations, with the use of scanning electron microscopy and transmission electron microscopy and the results of mechanical properties tests have shown that only at this temperature it is possible to obtain the fully recrystallized homogeneous fine-grained structure of the pearlitic steel.

Keywords

EN

81.05.Bx; 81.40.Ef; 81.70.Bt

Discipline

• 81.40.Ef: Cold working, work hardening; annealing, post-deformation annealing, quenching, tempering recovery, and crystallization
• 81.05.Bx: Metals, semimetals, and alloys
• 81.70.Bt: Mechanical testing, impact tests, static and dynamic loads(see also 62.20.M- Structural failure of materials; 46.50.+a Fracture mechanics, fatigue, and cracks)

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2016
• Volume: 130
• Issue: 4
• Pages: 931-934

Dates

published

2016-10

Contributors

author

D. Grygier

• Wrocław University of Technology, Department of Materials Science, Strength and Welding Technology, M. Smoluchowskiego 25, 50-372 Wrocław, Poland

author

M. Rutkowska-Gorczyca

• Wrocław University of Technology, Department of Materials Science, Strength and Welding Technology, M. Smoluchowskiego 25, 50-372 Wrocław, Poland

author

A. Żak

• Wrocław University of Technology, Department of Materials Science, Strength and Welding Technology, M. Smoluchowskiego 25, 50-372 Wrocław, Poland

author

R. Jasiński

• Wrocław University of Technology, Department of Materials Science, Strength and Welding Technology, M. Smoluchowskiego 25, 50-372 Wrocław, Poland

References

• [1] J.W. Lee, J.C. Lee, Y.S. Lee, K.T. Park, W.J. Nam, J. Mater. Process. Technol. 209, 5300 (2009), doi: 10.1016/j.jmatprotec.2009.03.019
• [2] F. Yang, Y. Wang, J.Q. Jiang, F. Fang, C. Ma, K.L. Zhao, W. Li, Mater. Sci. Eng. A 487, 468 (2008), doi: 10.1016/j.msea.2007.10.061
• [3] V.I. Izotov, V.A. Pozdnyakov, E.V. Luk'yanenko, O.Yu. Usanova, G.A. Filippov, Phys. Met. Metall. 103, 519 (2007), doi: 10.1134/S0031918X07050122
• [4] F. Wetscher, R. Stock, R. Pippan, Mater. Sci. Eng. A 445-446, 237 (2007), doi: 10.1016/j.msea.2006.09.026
• [5] Yu. Ivanisenko, R.K. Wunderlich, R.Z. Valiev, H.-J. Fecht, Scr. Mater. 49, 947 (2003), doi: 10.1016/S1359-6462(03)00478-0
• [6] Y.S. Yang, J.G. Bae, C.G. Park, Mater. Sci. Eng. A 508, 148 (2009), doi: 10.1016/j.msea.2008.12.036
• [7] K. Handa, Y. Kimura, Y. Yasumoto, T. Kamioka, Y. Mishima, Mater. Sci. Eng. A 527, 1926 (2010), doi: 10.1016/j.msea.2009.11.036
• [8] C. Kammerhofer, A. Hohenwarter, S. Scheriau, H.P. Brantner, R. Pippan, Mater. Sci. Eng. A 585, 190 (2013), doi: 10.1016/j.msea.2013.07.032

Identifiers

DOI

10.12693/APhysPolA.130.931