The Influence of Technological Parameters of the Casting Process on the Structure and Selected Properties of Iron-Based Metallic Glasses

• Authors: W. Pilarczyk , T. Jung , R. Babilas
• Languages of publication: EN

Abstracts

EN

The main aim of this paper was to produce amorphous ribbons with specified composition with the use of various process parameters and X-ray qualitative and quantitative phase analysis after casting and heat treating. Station for ultra-fast cooling of the molten alloy with high vacuum pumps designed for the production of metallic glasses in the form: of ribbons with the use of Bühler Melt Spinner SC was used. The X-ray qualitative and quantitative phase analysis, microscopic observation, microhardness and thermal properties tests of the investigated ribbons were conducted. Based on experimental data the discussion on the correlation between casting process parameters, phase and quantitative composition and heat treatment was carried out.

Keywords

EN

61.05.cp; 81.05.Bx; 81.05.Kf; 81.70.Bt; 81.70.Pg

Discipline

• 61.05.cp: X-ray diffraction
• 81.05.Kf: Glasses (including metallic glasses)
• 81.05.Bx: Metals, semimetals, and alloys
• 81.70.Bt: Mechanical testing, impact tests, static and dynamic loads(see also 62.20.M- Structural failure of materials; 46.50.+a Fracture mechanics, fatigue, and cracks)
• 81.70.Pg: Thermal analysis, differential thermal analysis (DTA), differential thermogravimetric analysis

• Journal: Acta Physica Polonica A
• Year: 2016
• Volume: 130
• Issue: 4
• Pages: 923-926

Dates

published

2016-10

Contributors

author

W. Pilarczyk

• Silesian University of Technology, Faculty of Mechanical Engineering, Akademicka 2A, Gliwice, Poland

author

T. Jung

• Silesian University of Technology, Faculty of Mechanical Engineering, Akademicka 2A, Gliwice, Poland

author

R. Babilas

• Silesian University of Technology, Faculty of Mechanical Engineering, Akademicka 2A, Gliwice, Poland

References

• [1] R. Piccin, P. Tiberto, M. Baricco, J. Alloys Comp. 434-435, 628 (2007), doi: 10.1016/j.jallcom.2006.08.272
• [2] X.M. Huang, X.D. Wang, J.Z. Jiang, J. Alloys Comp. 485, 35 (2009), doi: 10.1016/j.jallcom.2009.06.049
• [3] D. Li, Z. Lu, S. Zhou, Sensor. Actuat. A Phys. 109, 68 (2003), doi: 10.1016/j.sna.2003.09.008
• [4] N.Q. Hoa, D.T.H. Gam, N. Chau, N.D. The, S.C. Yu, J. Magn. Magn. Mater. 310, 2483 (2007), doi: 10.1016/j.jmmm.2006.11.088
• [5] S.S. Yoon, N.A. Buznikov, L. Jin, C.O. Kim, C. Kim, J. Magn. Magn. Mater. 304, 186 (2006), doi: 10.1016/j.jmmm.2006.01.156
• [6] M. Karolus, J. Mater. Proc. Tech. 175, 246 (2006), doi: 10.1016/j.jmatprotec.2005.04.016
• [7] V. Recarte, J.I. Perez-Landazabal, C. Gomez-Polo, Physica B 350, 135 (2004), doi: 10.1016/j.physb.2004.03.036
• [8] A. Inoue, B.L. Shen, C.T. Chang, Acta Mater. 52, 4093 (2004), doi: 10.1016/j.actamat.2004.05.022
• [9] W. Pilarczyk, J. Achiev. Mater. Manufact. Eng. 52, 83 (2012)
• [10] W. Pilarczyk, A. Pilarczyk, Mater. Technol. 49, 537 (2015), doi: 10.17222/mit.2014.140
• [11] A. Urata, N. Nishiyama, K. Amiya, A. Inoue, Mater. Sci. Eng. A Struct. 449-451, 269 (2007), doi: 10.1016/j.msea.2006.02.341
• [12] A. Hirata, Y. Hirotsu, K. Amiya, N. Nishiyama, A. Inoue, Intermetallics 16, 491 (2008), doi: 10.1016/j.intermet.2007.11.006

Identifiers

DOI

10.12693/APhysPolA.130.923