PL EN


Preferences help
enabled [disable] Abstract
Number of results
2016 | 130 | 4 | 913-915
Article title

Structures of Cu-Based Glass Forming System Doped with Iron

Content
Title variants
Languages of publication
EN
Abstracts
EN
The effects of iron additions on the structure of (Cu_{0.47}Ti_{0.34}Zr_{0.11}Ni_{0.08})_{100-x}Fe_{x} (x=0, 1.5, 3, 6) glass forming system are presented. The alloys were synthesized by arc melting of high purity elements and melt spun to form: rapidly quenched ribbons. X-ray diffraction studies showed the amorphous structure of the base and Fe-containing alloys, confirmed by the presence of exothermic peaks on differential scanning calorimetry curves. Bulk samples in the form of rods (Φ3×55 mm) were cast using a suction casting unit attached to the arc melter. Structural investigations revealed partial crystallization of the base Cu₄₇Ti₃₄Zr₁₁Ni₈ alloy. Iron additions significantly decreased the glass forming ability of the alloy, leading to primary crystallization of dendrites.
Keywords
Contributors
author
  • Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, al. A. Mickiewicza 30, 30-059 Krakow, Poland
author
  • Faculty of Materials Science and Engineering, Warsaw University of Technology, Wołoska 141, 02-507 Warsaw, Poland
author
  • Institute of Metallurgy and Materials Sciences, Polish Academy of Sciences, W. Reymonta 25, 30-059 Krakow, Poland
author
  • Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, al. A. Mickiewicza 30, 30-059 Krakow, Poland
author
  • Academic Centre for Materials and Nanotechnology, AGH University of Science and Technology, al. A. Mickiewicza 30, 30-059 Krakow, Poland
  • Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, al. A. Mickiewicza 30, 30-059 Krakow, Poland
author
  • Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, al. A. Mickiewicza 30, 30-059 Krakow, Poland
  • Academic Centre for Materials and Nanotechnology, AGH University of Science and Technology, al. A. Mickiewicza 30, 30-059 Krakow, Poland
References
  • [1] A. Inoue, A. Takeuchi, Acta Mater. 59, 2243 (2011), doi: 10.1016/j.actamat.2010.11.027
  • [2] A. Inoue, Acta Mater. 48, 279 (2000), doi: 10.1016/S1359-6454(99)00300-6
  • [3] V. Ponnambalam, S.J. Poon, G.J. Shiflet, V.M. Keppens, R. Taylor, G. Petculescu, Appl. Phys. Lett. 83, 1131 (2003), doi: 10.1063/1.1599636
  • [4] J. Latuch, P. Krzesniak, T. Kulik, J. Alloys Comp. 483, 47 (2009), doi: 10.1016/j.jallcom.2008.07.180
  • [5] H. Tan, Y. Zhang, Y. Li, J. Appl. Phys. 10, 1203 (2002), doi: 10.1016/S0966-9795(02)00148-6
  • [6] R. Babilas, K. Cesarz-Andraczke, R. Nowosielski, A. Burian, J. Mater. Eng. Perform. 23, 2241 (2014), doi: 10.1007/s11665-014-0972-1
  • [7] D. Xu, G. Duan, W.L. Johnson, Phys. Rev. Lett. 92, 245504 (2004), doi: 10.1103/PhysRevLett.92.245504
  • [8] C.L. Dai, H. Guo, Y. Shen, Y. Li, E. Ma, J. Xu, Scr. Mater. 54, 1403 (2006), doi: 10.1016/j.scriptamat.2005.11.077
  • [9] W. Zhang, Q. Zhang, C. Qin, A. Inoue, Mater. Sci. Eng. B 148, 92 (2008), doi: 10.1016/j.mseb.2007.09.064
  • [10] A.A. Kündig, M. Ohnuma, D.H. Ping, T. Ohkubo, K. Hono, Acta Mater. 52, 2441 (2004), doi: 10.1016/j.actamat.2004.01.036
  • [11] N. Mattern, T. Gemming, G. Goerigk, J. Eckert, Scr. Mater. 57, 29 (2007), doi: 10.1016/j.scriptamat.2007.03.016
  • [12] B.J. Park, H.J. Chang, D.H. Kim, W.T. Kim, Appl. Phys. Lett. 85, 6353 (2004), doi: 10.1063/1.1842360
  • [13] K. Ziewiec, K. Bryła, A. Błachowski, K. Ruebenbauer, K. Prusik, S. Kąc, T. Kozieł, J. Microsc. 237, 232 (2010), doi: 10.1111/j.1365-2818.2009.03229.x
  • [14] K. Ziewiec, P. Malczewski, R. Gajerski, A. Ziewiec, J. Non. Cryst. Solids 357, 73 (2011), doi: 10.1016/j.jnoncrysol.2010.10.002
  • [15] T. Kozieł, Z. Kędzierski, A. Zielińska-Lipiec, J. Latuch, G. Cieślak, J. Microsc. 237, 267 (2010), doi: 10.1111/j.1365-2818.2009.03240.x
  • [16] T. Kozieł, J. Latuch, A. Zielińska-Lipiec, Arch. Metall. Mater. 58, 601 (2013), doi: 10.2478/amm-2013-0044
  • [17] A. Takeuchi, A. Inoue, Mater. Trans. 46, 2817 (2005), doi: 10.2320/matertrans.46.2817
  • [18] T. Kozieł, Arch. Metall. Mater. 60, 767 (2015), doi: 10.1515/amm-2015-0204
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv130n427kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.