Journal
Article title
Authors
Title variants
Languages of publication
Abstracts
In order to obtain an alloy with a specific set of magnetic properties, the dominant influences of chemical component and thermal treatment selection need to be satisfied. In this paper, the results of investigations into the microstructure and magnetic properties of the following alloys are presented: amorphous Fe₈₂Zr₇Nb₂Cu₁B₈ and crystalline Fe₈₂Zr₆Y₁Nb₂Cu₁B₈. The structure and microstructure were examined using the Mössbauer spectroscopy and X-ray diffractometry. The Fe₈₂Zr₇Nb₂Cu₁B₈alloy was found to be fully amorphous in the as-quenched state and the transmission Mössbauer spectrum for this alloy is typical of that for weak ferromagnets, with an average hyperfine field of 9.86(2) T. The shape of this spectrum was found to have changed noticeably in the case of the Fe₈₂Zr₆Y₁Nb₂Cu₁B₈ alloy. This change was attributed to the presence of the crystalline phase bcc-Fe.
Discipline
Journal
Year
Volume
Issue
Pages
909-912
Physical description
Dates
published
2016-10
Contributors
author
- Częstochowa University of Technology, Institute of Physics, Faculty of Production Engineering and Materials Technology, al. Armii Krajowej 19, 42-200 Częstochowa, Poland
author
- Częstochowa University of Technology, Institute of Physics, Faculty of Production Engineering and Materials Technology, al. Armii Krajowej 19, 42-200 Częstochowa, Poland
author
- Częstochowa University of Technology, Institute of Physics, Faculty of Production Engineering and Materials Technology, al. Armii Krajowej 19, 42-200 Częstochowa, Poland
References
- [1] A.P. Thomas, M.R.J. Gibbs, J. Magn. Magn. Mater. 103, 97 (1992), doi: 10.1016/0304-8853(92)90242-G
- [2] M. Hasiak, K. Sobczyk, J. Zbroszczyk, W. Ciurzyńska, J. Olszewski, M. Nabiałek, J. Kaleta, J. Świerczek, A. Łukiewska, IEEE Trans. Magn. 11, 3879 (2008), doi: 10.1109/TMAG.2008.2002248
- [3] K. Sobczyk, J. Świerczek, J. Gondro, J. Zbroszczyk, W. Ciurzyńska, J. Olszewski, P. Brągiel, A. Łukiewska, J. Rzącki, M. Nabiałek, J. Magn. Magn. Mater. 324, 540 (2012), doi: 10.1016/j.jmmm.2011.08.038
- [4] P. Pawlik, M. Nabiałek, E. Żak, J. Zbroszczyk, J.J. Wysłocki, J. Olszewski, K. Pawlik, Archiv. Mater. Sci. 25, 177 (2004)
- [5] M. Nabiałek, J. Alloys Comp. 642, 98 (2015), doi: 10.1016/j.jallcom.2015.03.250
- [6] K. Błoch, J. Magn. Magn. Mater. 390, 118 (2015), doi: 10.1016/j.jmmm.2015.04.032
- [7] S.N. Kane, S. Sarabhai, A. Gupta, L.K. Varga, T. Kulik, J. Magn. Magn. Mater. 215-216, 372 (2000), doi: 10.1016/S0304-8853(00)00162-1
- [8] M. Al-Haj, J. Barry, J. Mater. Sci. Lett. 17, 1125 (1998), doi: 10.1023/A:1006656916549
- [9] K. Błoch, M. Nabiałek, M. Dośpiał, S. Garus, Archiv. Metall. Mater. 60, 7 (2015), doi: 10.1515/amm-2015-0001
- [10] T. Egami, J. Magn. Magn. Mater. 31-34, 1571 (1983), doi: 10.1016/0304-8853(83)91019-3
- [11] D. Szewieczek, S. Lesz, J. Mater. Process. Technol. 162-163, 254 (2005), doi: 10.1016/j.jmatprotec.2005.02.017
- [12] T. Kozieł, A. Zielińska-Lipiec, Z. Kędzierski, T. Czeppe, J. Microsc. 224, 27 (2006), doi: 10.1111/j.1365-2818.2006.01647.x
- [13] Y. Takahara, Mater. Sci. Eng. A 231, 128 (1997), doi: 10.1016/S0921-5093(97)00071-3
- [14] J. Gondro, J. Świerczek, J. Rzącki, W. Ciurzyńska, J. Olszewski, J. Zbroszczyk, K. Błoch, M. Osyra, A. Łukiewska, J. Magn. Magn. Mater. 341, 100 (2013), doi: 10.1016/j.jmmm.2013.04.009
- [15] H. Kronmüller, Philos. Mag. 48, 127 (1983), doi: 10.1080/13642818308226466
- [16] A. Brand, Nucl. Instrum. Methods Phys. Res. B 28, 398 (1987), doi: 10.1016/0168-583X(87)90182-0
- [17] D.H. Ryan, J.M.D. Coey, E. Batalla, Z. Altouniam, J.O. Ström-Olsen, Phys. Rev. B 35, 8630 (1987), doi: 10.1103/PhysRevB.35.8630
- [18] S.N. Kaul, V. Siruguri, G. Chandra, Phys. Rev. B 45, 12343 (1992), doi: 10.1103/PhysRevB.45.12343
- [19] R. Meyer, H. Kronmüller, Phys. Status Solidi B 109, 693 (1982), doi: 10.1002/pssb.2221090228
- [20] I. Betancourt, S. Baez, J. Non-Cryst. Solids 355, 1202 (2009), doi: 10.1016/j.jnoncrysol.2009.05.013
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv130n426kz