Ac Electrical Properties of Polystyrene/Ferroelectric Barium Stannate Titanate Ba(Ti_{0.9}Sn_{0.1})O₃ Ceramic Composite

• Authors: M. Al-Akhras , S. Saq'an , Z. Ghadieh
• Languages of publication: EN

Abstracts

EN

A composite of polystyrene (PS)/ferroelectric barium stannate titanate (BST) with different BST concentration was prepared. The dielectric properties were measured using HP low impedance frequency analyzer. It is found that samples behaved as an RC network. Composites become more capacitive than resistive with increasing frequency while resistance decreases with increasing BST ceramic concentration. Temperature effects were monitored throughout the annealing process. It is found that the capacity and the ac conductivity increased after annealing while the bulk resistance decreased. Our results suggest that, the obtained material is expected to be a promising candidate for electronic ceramics. The study provides a better understanding of the relationship among these parameters.

Keywords

EN

77.22.Gm   77.84.Lf   72.80.Tm  

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2016
• Volume: 130
• Issue: 1
• Pages: 447-449

Dates

published

2016-07

References

• [1] D. Lisjak, M. Drofenik, D. Kolar, J. Mater. Res. 15, 417 (2000), doi: 10.1557/JMR.2000.0065
• [2] M. Kumar, A. Garg, R. Kumar, M.C. Bhatnagar, Physica B 403, 1819 (2008), doi: 10.1016/j.physb.2007.10.144
• [3] C. Kajtoch, W. Bąk, B. Garbarz-Glos, Condens. Matter Phys. 16, 31702 (2013), doi: 10.5488/CMP.16.31702
• [4] H. Takeda, W. Aoto, T. Shiosaki, Appl. Phys. Lett. 87, 102104 (2005), doi: 10.1063/1.2042551
• [5] T. Shimada, K. Touji, Y. Katsuyama, H. Takeda, T. Shiosaki, J. Eur. Ceram. Soc. 27, 3877 (2007), doi: 10.1016/j.jeurceramsoc.2007.02.171
• [6] X. Wei, X. Yao, Mater. Sci. Eng. 137, 184 (2007), doi: 10.1016/j.mseb.2006.11.012
• [7] M. Abd El-Hadi, S. Saq'an, A. Zihlif, Adv. Perform. Mater. 23, 152 (2008)
• [8] S. Saq'an, A. Ayesh, A. Zihlif, Opt. Mater. 24, 629 (2004), doi: 10.1016/S0925-3467(03)00166-6
• [9] S. Saq'an, A. Ayesh, A. Zihlif, G. Ragosta, Polym. Test. 23, 739 (2004), doi: 10.1016/j.polymertesting.2004.04.008
• [10] S. Aziz, M. El-Mallah, Int. J. Polym. Mater. 54, 1157 (2005), doi: 10.1080/009140390901680
• [11] K. Nairn, A. Best, P. Newman, D. Mac Farance, M. Farsyth, Solid State Ion. 12, 115 (1999), doi: 10.1016/S0167-2738(98)00537-2
• [12] M. Altaf, M.S. Choudary, J. Res. Sci. 17, 201 (2006)
• [13] S. Ebrahim, A. Kashyout, M. Soliman, Curr. Appl. Phys. 9, 448 (2009), doi: 10.1016/j.cap.2008.04.007
• [14] P. Singh, A. Chandra, J. Phys. D Appl. Phys. 36, L93 (2003), doi: 10.1088/0022-3727/36/19/L01
• [15] S. Saq'an, A. Zihlif, G. Ragosta, J. Thermoplast. Comp. Mater. 21, 457 (2008), doi: 10.1177/0892705708090826
• [16] M.I. Mohammed, A. Abdrabo, E. Mahmoud, Egypt. J. Sol. 25, 49 (2002)
• [17] M. AbuHijleh, Y. Al-Ramadeen, A. Zihlif, Int. J. Polym. Mater. 46, 377 (2000), doi: 10.1080/00914030008054868
• [18] M.-A.H. Al-Akhras, S. Al Saq'an, Z. Ghadieh, AIP Conf. Proc. 1569, 23 (2103), doi: 10.1063/1.4849221
• [19] M.-A.H. Al-Akhras, S. Al Saq'an, Z. Ghadieh, in: 2nd Int. Congress on Energy Efficiency and Energy Related Materials (ENEFM2014), Eds.: A.Y. Oral, Z.B. Bahsi Oral, M. Ozer, Springer Proc. in Energy, Springer International Publishing 2015, p. 335, doi: 10.1007/978-3-319-16901-9_41
• [20] A. Abu-Jamous, A.M. Zihlif, Physica B 405, 2762 (2010), doi: 10.1016/j.physb.2010.02.050
• [21] Wei Cai, Yize Fan, Jiacheng Gao, Chunlin Fu, Xiaoling Deng, J. Mater. Sci. 22, 265 (2011)
• [22] Z. Yu, C. Ang, R.Y. Guo, A.S. Bhalla, J. Appl. Phys. 92, 2655 (2002), doi: 10.1063/1.1495069
• [23] R. Popielarz, C.K. Chiang, R. Nozak, J. Obzzut, Macromolecules 34, 5910 (2001), doi: 10.1021/ma001576b
• [24] A. Eshtayyah, M.Sc. Thesis, Al Al-Bayt University, Jordan 2006

Identifiers

DOI

10.12693/APhysPolA.130.447