PL EN


Preferences help
enabled [disable] Abstract
Number of results
2016 | 130 | 1 | 394-396
Article title

Nanomechanical Properties of Different Dental Restorative Materials

Content
Title variants
Languages of publication
EN
Abstracts
EN
The aim of this study is to determine the hardness and roughness of glass ionomer cement, glass carbomer, and compomer by nanoindentation. Three different dental restorative materials: glass ionomer cement, glass carbomer cement, and compomer were used. Disc specimens (10 mm × 1 mm) were prepared from each material using teflon mold. All specimens were light cured according to the manufacturer's instructions. The specimens were then mounted in polyacrilic resin. After grinding and polishing the specimens were stored in distilled water at 37°C for 1 day. The specimens were investigated using nanoindenter. The highest nanohardness was measured for glass ionomer cement and the lowest for glass carbomer. Regarding roughness, glass ionomer cement and compomer showed the highest mean values. Glass ionomer cement and compomer exhibited similar nanomechanical properties. Glass carbomer had superior ability to be polished up.
Keywords
EN
Year
Volume
130
Issue
1
Pages
394-396
Physical description
Dates
published
2016-07
References
  • [1] R. Asaro, V. Lubarda, Mechanics of Solids and Materials, Cambridge University Press, Cambridge 2006
  • [2] R. Gallagher, M. Balooch, G. Balooch, R. Wilson, S. Marshall, G. Marshall, J. Dental Biomech. 1, 256903 (2010), doi: 10.4061/2010/256903
  • [3] D.M. Ebenstein, in: Handbook of Nanoindentation with Biological Applications, Ed. M.L. Oyen, Pan Stanford Publ., Singapore 2010, p. 279
  • [4] R. Silva, A. Zuanon, R. Esberard, M. Candido, J. Machado, J. Mater. Sci. Mater. Med. 18, 139 (2007), doi: 10.1007/s10856-0060672-y
  • [5] C. Bréchignac, P. Houdy, M. Lahmani, Nanomaterials and Nanochemistry, Springer Sci. and Business Media, France 2008
  • [6] O. Sahin, O. Uzun, M. Sopicka-Lizer, H. Gocmez, U. Kölemen, J. Europ. Ceram. Soc. 28, 1235 (2008), doi: 10.1016/j.jeurceramsoc.2007.09.052
  • [7] P. Dionysopoulos, N. Kotsanos, Y. Papadogianis, J. Oral Rehabilit. 23, 511 (1996), doi: 10.1111/j.1365-2842.1996.tb00888.x
  • [8] U. Lohbauer, Materials 3, 76 (2009), doi: 10.3390/ma3010076
  • [9] J.D. Scholtanus, M.-C.D. Huysmans, J. Dentistry 35, 156 (2007), doi: 10.1016/j.jdent.2006.07.006
  • [10] F. Ghaderi, A. Mardani, J. Dental Res. Dental Clin. Dental Prosp. 9, 92 (2015), doi: 10.15171/joddd.2015.018
  • [11] K. Gorseta, D. Glavina, A. Borzabadi-Farahani, R.N. Van Duinen, I. Skrinjaric, R.G. Hill, E. Linch, Europ. J. Prosthodont. Restorat. Dentistry 22, 67 (2014) http://ncbi.nlm.nih.gov/pubmed/?term=25134364
  • [12] U. Menne-Happ, N. Ilie, J. Dent. 41, 223 (2013), doi: 10.1016/j.jdent.2012.11.005
  • [13] W.C. Oliver, G.M. Pharr, J. Mater. Res. 7, 1564 (1992), doi: 10.1557/JMR.1992.1564
  • [14] L.H. He, M.V. Swain, J. Mech. Behav. Biomed. Mater. 1, 18 (2008), doi: 10.1016/j.jmbbm.2007.05.001
  • [15] S. Poolthong, Ph.D. Thesis, University of Sydney, Sydney, Australia 1998
  • [16] H. Fong, M. Sarikaya, S.N. White, M.L. Snead, Mater. Sci. Eng. C 7, 119 (1999), doi: 10.1016/S0928-4931(99)00133-2
  • [17] M. Da, R.J. Young, A.B. Mann, D.C. Watts, Arch. Orofac. Sci. 2, 26 (2007)
  • [18] L. Zheng, J. Zheng, L. Weng, L. Qian, Z. Zhou, Wear 271, 2297 (2011), doi: 10.1016/j.wear.2010.11.025
  • [19] F. Lippert, D.M. Parker, K.D. Jandt, J. Coll. Interface Sci. 280, 442 (2004), doi: 10.1016/j.jcis.2004.08.016
  • [20] J. Zhou, L.L. Hsiung, J. Biomed. Mater. Res. Part A 81A, 66 (2007), doi: 10.1002/jbm.a.31012
  • [21] C.M. Bollenl, P. Lambrechts, M. Quirynen, Dent. Mater. 13, 258 (1997), doi: 10.1016/S0109-5641(97)80038-3
  • [22] Z. Arslanoglu, H. Altan, O. Sahin, M. Tekin, M. Adigüzel, Acta Phys. Pol. A 128, B-310 (2015), doi: 10.12693/APhysPolA.128.B-310
Document Type
Publication order reference
YADDA identifier
bwmeta1.element.bwnjournal-article-appv130n1105kz
Identifiers
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.