Influence of Rare Earth Element on the Mechanical Properties of ZE41 Magnesium Alloys Produced by Mechanical Alloying

• Authors: O. Sahin , F. Haluk Ertsak , K. Oztekin , S. Ozarslan
• Languages of publication: EN

Abstracts

EN

In this work, we have intended to synthesize ZE41 Magnesium alloys having varying content of Ce of 0.3, 0.6 and 0.9 wt.% and to investigate mechanical properties of these alloys. Alloys were produced by mechanical alloying under argon atmosphere. Structural, and mechanical properties of these alloys were investigated by means of XRD, SEM and nanoindenter analysis. From the XRD data it is found that as the Ce content increases, the crystallite size also increases. On the other hand, the hardness of the alloys decreases with the increasing Ce content. Indentation results show that the measured hardness displays a peak load dependence. Load-independent hardness was calculated by Hays-Kendall approach. As a results, it was found that Ce-doping modifies the microstructure and hardness of the alloy.

Keywords

EN

62.20.-x; 62.20.Fe; 62.20.Qp

Discipline

• 62.20.-x: Mechanical properties of solids
• 62.20.Qp: Friction, tribology, and hardness(see also 46.55.+d Tribology and mechanical contacts in continuum mechanics of solids; for materials treatment effects on friction related properties, see 81.40.Pq)

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2016
• Volume: 130
• Issue: 1
• Pages: 289-292

Dates

published

2016-07

Contributors

author

O. Sahin

• Mustafa Kemal University, Science and Art Faculty, Micro/Nanomechanic Characterization Laboratory, Hatay 31034, Turkey

author

F. Haluk Ertsak

• Mustafa Kemal University, Science and Art Faculty, Micro/Nanomechanic Characterization Laboratory, Hatay 31034, Turkey

author

K. Oztekin

• Mustafa Kemal University, Science and Art Faculty, Micro/Nanomechanic Characterization Laboratory, Hatay 31034, Turkey

author

S. Ozarslan

• Mustafa Kemal University, Science and Art Faculty, Micro/Nanomechanic Characterization Laboratory, Hatay 31034, Turkey

References

• [1] F.H. Froes, D. Eliezer, E. Aghion, JOM 50, 30 (1998), doi: 10.1007/s11837-998-0411-6
• [2] M. Gupta, N.M.L. Sharon, Magnesium Alloys and Magnesium Composites, John Wiley & Sons, New Jersy 2011
• [3] G.I. Rosen, G. Segal, A. Lubinsky, Materials Sci. Forum 488-489, 509 (2005), doi: 10.4028/www.scientific.net/MSF.488-489.509
• [4] C. Suryanarayana, Prog. Mater. Sci. 46, 1 (2001), doi: 10.1016/S0079-6425(99)00010-9
• [5] C. Suryanarayana, in: Powder metal technologies and applications. ASM Handbook, ASM International, Materials Park 1998, Vol. 7., p. 80
• [6] M.L.B. Palacio, B. Bhushan, Mater. Charact. 78, 1 (2013), doi: 10.1016/j.matchar.2013.01.009
• [7] S. Lee, B.G. Choi, D. Choi, H.S. Park, J. Membr. Sci. 451, 40 (2014), doi: 10.1016/j.memsci.2013.09.038
• [8] S.R. Jian, G.J. Chen, W.M. Hsu, Materials 6, 4505 (2013), doi: 10.3390/ma6104505
• [9] S.R. Jian, Y.Y. Lin, W.C. Ke, Sci. Adv. Mater. 5, 7 (2013), doi: 10.1166/sam.2013.1424
• [10] S.R. Jian, Y.H. Lee, J. Alloy. Compd. 587, 313 (2014), doi: 10.1016/j.jallcom.2013.10.213
• [11] A.E. Ozmetin, O. Sahin, E. Ongun, M. Kuru, J. Alloy. Compd. 619, 262 (2015), doi: 10.1016/j.jallcom.2014.09.015
• [12] W.C. Oliver, G.M. Pharr, J. Mater. Res. 7, 1564 (1992), doi: 10.1557/JMR.1992.1564
• [13] O. Sahin, O. Uzun, M. Sopicka-Lizer, H. Gocmez, U. Kolemen, J. Phys. D: Appl. Phys. 41, 035305 (2008), doi: 10.1088/0022-3727/41/3/035305
• [14] F. Haluk Ertsak, M.Sc. Thesis, Mustafa Kemal University, 2015
• [15] O. Sahin, İ. Demirkol, H. Göcmez, M. Tuncer, H. Ali Cetinkara, H. Salih Güder, E. Sahin, A. Rıza Tuncdemir, Acta Phys. Pol. 123, 296 (2013), doi: 10.12693/APhysPolA.123.296
• [16] C. Hays, E.G. Kendall, Metallography 6, 275 (1973), doi: 10.1016/0026-0800(73)90053-0
• [17] O. Şahin, O. Uzun, U. Kölemen, N. Uçar, Material Characterization 59, 729 (2008), doi: 10.1016/j.matchar.2007.06.005

Identifiers

DOI

10.12693/APhysPolA.130.289