Electromagnetic Properties in Nanostructured Alloy Cu₇₀Co₃₀ Obtained by a Non-Equilibrium Method

• Authors: W. Laslouni , M. Azzaz
• Languages of publication: EN

Abstracts

EN

The Cu₇₀Co₃₀ alloy was developed by a non-equilibrium method of "mechanical alloying", from a mixture of copper powder and pure cobalt. The nanostructured alloy Cu-Co with grains with a size of about 12 nm, has different electromagnetic properties which are often superior to those of conventional solid alloy, because of the critical size effect. In this work we are interested in the electromagnetic properties of the synthesized material. Resistivity, eddy current and the magnetization evolution were studied. The frequencies selected for plotting the diagram vary from 100 Hz to 100 kHz. To satisfy the Weiss condition, the excitation field must be of the same order of magnitude as the field that characterizes the area of Weiss. For all prepared series, the evolution of the magnetization as a function of milling time was analyzed. The influence of milling time on the resistivity variation is shown.

Keywords

EN

13.40.-f

Discipline

• 13.40.-f: Electromagnetic processes and properties

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2016
• Volume: 130
• Issue: 1
• Pages: 112-114

Dates

published

2016-07

Contributors

author

W. Laslouni

• Département de Physique, Faculté des Sciences, Université de Blida, Route de P270 Blida 09000, Algeria,
• Laboratoire de Science et Génie des Matériaux, u.s.t.h.b., BP 32 El-Alia, Babezzouar 16311, Alger, Algeria

author

M. Azzaz

• Laboratoire de Science et Génie des Matériaux, u.s.t.h.b., BP 32 El-Alia, Babezzouar 16311, Alger, Algeria

References

• [1] C.C. Koch, Nanostruct. Mater. 9, 13 (1997), doi: 10.1016/S0965-9773(97)00014-7
• [2] C. Suryanarayana, Prog. Mater. Sci. 46, 1 (2001), doi: 10.1016/S0079-6425(99)00010-9
• [3] D.L. Zhang, Prog. Mater. Sci. 49, 537 (2004), doi: 10.1016/S0079-6425(03)00034-3
• [4] S. Alleg, M. Ibrir, N.E. Fenineche, S. Azzaza, R. Bensalem, J.J. Suñol, J. Alloys Compd. 494, 109 (2010), doi: 10.1016/j.jallcom.2010.01.013
• [5] M.S. El-Eskandarany, Mechanical Alloying for Fabrication of Advanced Engineering Materials, Noyes Publication, New York 2001
• [6] W. Tebib, S. Alleg, J.M. Greneche, Int. J. Nanoparticles 3, 237 (2010), doi: 10.1504/IJNP.2010.035879
• [7] R. Grimberg, L. Udpa, A. Savin, R. Steigmann, V. Palihovici, S. Udpa, NDT & E Int. 39, 264 (2006), doi: 10.1016/j.ndteint.2005.08.004
• [8] Y.G. Yoo, D.S. Yang, S.C. Yu, W.T. Kim, J.M. Lee, J. Magnet. Magnet. Mater. 203, 193 (1999), doi: 10.1016/S0304-8853(99)00225-5
• [9] J. Jiang, D.G. Zeng, H. Ryu, K.W. Chung, S. Bae, J. Magnet. Magnet. Mater. 322, 1834 (2010), doi: 10.1016/j.jmmm.2009.12.036
• [10] E.H.C.P. Sinnecker, I.S. Oliveira, P. Tiberto, A.P. Guimaraes, J. Magnet. Magnet. Mater. 218, L132 (2000), doi: 10.1016/S0304-8853(00)00424-8
• [11] G. Martinez, M.N. Baibich, M.G.M. Miranda, E. Vargas, J. Magnet. Magnet. Mater. 272-276, 1716 (2004), doi: 10.1016/j.jmmm.2003.12.1208

Identifiers

DOI

10.12693/APhysPolA.130.112