PL EN


Preferences help
enabled [disable] Abstract
Number of results
2016 | 129 | 4 | 849-852
Article title

Preparation and Characterization of Surfactant-Modified Powder Activated Carbon (SM-PAC) Reinforced Poly (Ethylene Oxide) (PEO) Composites

Content
Title variants
Languages of publication
EN
Abstracts
EN
Poly (ethylene oxide), PEO, which was used for a wide variety of applications is a flexible, crystalline, thermoplastic, water-soluble and non-ionic polymer. The most of studies on surfactant-modified activated carbon (SM-PAC) have been generally focused on the removal of contaminants. This study aims the preparation of PEO/(SM-PAC) composites, using solution-intercalation method. Firstly activated carbon was modified with cationic surfactant, Cetyltrimethylammonium Bromide (CTAB). Then PEO/(SM-PAC) composites were prepared using solution-intercalation method, with two different (SM-PAC) contents (1.0 and 2.0 wt.%). The characterization of the composites was made by X-ray diffraction (XRD), Fourier Infrared Spectroscopy (FT-IR), thermal analysis and tensile tests. The XRD patterns revealed that 2θ positions of the broad peaks belonging to the composites significantly shift to left compared with those of virgin PEO. The SEM images of the surfactant-modified powdered activated carbon (SM-PAC)/PEO composites prepared with the two different SM-PAC contents show that there is an intensive interaction between the CTA^{+} ions of modified activated carbon surface and the polymer chains. From the tensile tests, it was found that the unmodified powdered activated carbon dispersed into the polymer matrix made the ductile polymer more brittle. However, the tensile and yield strengths of the composite, prepared with modified powdered activated carbon, have decreased, and the strain percent value has significantly increased.
Keywords
EN
Publisher

Year
Volume
129
Issue
4
Pages
849-852
Physical description
Dates
published
2016-04
Contributors
author
  • Atatürk University, Faculty of K.K. Education, 25240, Erzurum, Turkey
  • Kafkas University, Faculty of Science and Literature, 361000, Kars, Turkey
author
  • Erzincan University, Faculty of Education, 24030, Erzincan, Turkey
References
  • [1] C. Akmil Başar, A. Karagunduz, B. Keskinler, A. Cakici, Appl. Surf. Sci. 218, 170 (2003), doi: 10.1016/S0169-4332(03)00576-2
  • [2] H-J. Hong, H. Kim, Y-J. Lee, J-W. Yang, J. Hazard. Mater. 170, 1242 (2009), doi: 10.1016/j.jhazmat.2009.05.108
  • [3] C. Yan, L. Zou, R. Short, Desalination 333, 101 (2014), doi: 10.1016/j.desal.2013.11.032
  • [4] M. Anson, J. Marchese, E. Garis, N. Ochoa, C. Pagliero, J. Membrane Sci. 243, 19 (2004), doi: 10.1016/j.memsci.2004.05.008
  • [5] L. Ballinas, C. Torras, V. Fierro, R. Garcia-Valls, J. Phys. Chem. Solids 65, 633 (2004), doi: 10.1016/j.jpcs.2003.10.043
  • [6] A. Oh, J. Yun, H.-I. Kim, J. Polym. Res. 18, 2441 (2011), doi: 10.1007/s10965-011-9658-7
  • [7] D.R. Simpson, Water Res. 42, 2839 (2008), doi: 10.1016/S0043-1354(08)00189-9
  • [8] L.P. Ma, P. Ning, Y.Y. Zhang, X.Q. Wang, Chem. Eng. J. 137, 471 (2008), doi: 10.1016/j.cej.2007.04.032
  • [9] D. Mehandjiev, M. Khristova, E. Bekyarova, Carbon 34, 757 (1996), doi: 10.1016/0008-6223(96)00015-2
  • [10] H. Fukuyama, S. Terai, Catal. Today 130, 382 (2008), doi: 10.1016/j.cattod.2007.10.034
  • [11] L.S. Chan, W.H. Cheung, S.J. Allen, G. McKay, Sep. Purif. Technol. 67, 166 (2009), doi: 10.1016/j.seppur.2009.03.020
  • [12] H. Naono, M. Hakuman, M. Shimoda, K. Nakai, S. Kondo, J. Colloid Interface Sci. 182, 230 (1996), doi: 10.1006/jcis.1996.0455
  • [13] J. Hu, Q.M. Gao, Y.H. Wu, S.Q. Song, Int. J. Hydrogen Energy 32, 1943 (2007), doi: 10.1016/j.ijhydene.2006.09.017
  • [14] L. Feng, J. Zheng, H. Yang, Y. Guo, W. Li, X. Li, Solar Energ. Mat. Sol. C. 95, 644 (2011), doi: 10.1016/j.solmat.2010.09.033
  • [15] K. Baek, B.-K. Kim, H.-J. Cho, J.-W. Yang, J. Hazard. Mater. 99, 303 (2003), doi: 10.1016/S0304-3894(03)00063-3
  • [16] H.-D. Choi, M.-C. Shin, D.-H. Kim, C.-S. Jeon, K. Baek, Desalination 223, 290 (2008), doi: 10.1016/j.desal.2007.01.224
  • [17] C.A. Basar, C. Aydiner, S. Kara, B. Keskinler, Sep. Purif. Technol. 48, 270 (2006), doi: 10.1016/j.seppur.2005.07.033
  • [18] K. Baek, B.-K. Kim, J.-W. Yang, Desalination 156, 137 (2003), doi: 10.1016/S0011-9164(03)00336-9
  • [19] K. Baek, J.-W. Yang, Desalination 167, 101 (2004), doi: 10.1016/j.desal.2004.06.117
  • [20] H.-D. Choi, J.-M. Cho, K. Baek, J.-S. Yang, J.-Y. Lee, J. Hazard. Mater. 161, 1565 (2009), doi: 10.1016/j.jhazmat.2008.04.067
  • [21] J. Kahovec, R.B. Fox, K. Hatada, Pure Appl. Chem. 74, 1921 (2002), doi: 10.1351/pac200274101921
  • [22] K. Pielichowski, K. Flejtuch, J. Anal. Appl. Pyrol. 73, 131 (2005), doi: 10.1016/j.jaap.2005.01.003
  • [23] M.M. Crowley, F. Zhang, J.J. Koleng, J.W. McGinity, Biomaterials 23, 4241 (2002), doi: 10.1016/S0142-9612(02)00187-4
  • [24] N.S. Vrandecic, M. Erceg, M. Jakic, I. Klaric, Thermochim. Acta 498, 71 (2010), doi: 10.1016/j.tca.2009.10.005
  • [25] M.M.E. Jacob, E. Hackett, E.P. Giannelis, J. Mater. Chem. 13, 1 (2003), doi: 10.1039/B204458G
  • [26] Z. Shen, G.P. Simon, Y-B. Cheng, Polymer 43, 4251 (2002), doi: 10.1016/S0032-3861(02)00230-6
  • [27] W. Loyens, P. Jannasch, F.H.J. Maurer, Polymer 46, 915 (2005), doi: 10.1016/j.polymer.2004.11.076
  • [28] P. Meneghetti, S. Qutubuddin, J. Colloid Interface Sci. 288, 387 (2005), doi: 10.1016/j.jcis.2005.03.003
  • [29] P. Aranda, E. Ruiz-Hitzky, Acta Polym. 45, 59 (1994), doi: 10.1002/actp.1994.010450201
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv129n4113kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.