PL EN


Preferences help
enabled [disable] Abstract
Number of results
2016 | 129 | 4 | 736-741
Article title

Evaluation of Surface Characteristics and Physical Properties on Biodegradable Magnesium-Calcium Alloys by Anodic Oxidation

Content
Title variants
Languages of publication
EN
Abstracts
EN
The purpose of this study was to determine the effect of calcium (Ca) on the surface characteristics and physical properties of magnesium-calcium alloys after anodization. A novel binary alloy Mg-xCa (in which x=0.5, 1, or 5 wt.%) was cast by combining magnesium (99.9%) and calcium (99.9%) in an argon gas (99.99%) atmosphere. A magnesium alloy rod having a diameter of 15 mm was cut into discs, each 2 mm thick. The specimens were subjected to anodic oxidation at 120 V for 15 minutes at room temperature in an electrolyte solution consisting of calcium gluconate, sodium hexametaphosphate, and sodium hydroxide. Surface and cross-sectional morphological changes were observed using scanning electron microscopy, and the microstructures and phases were detected by means of X-ray diffraction. Hardness and surface roughness were assessed by means of a Vickers hardness tester and a surface roughness meter, respectively. The results show that the physical properties of these magnesium-calcium alloys have been improved, because it was possible to control the dissolution rate according to the amount of calcium added.
Keywords
EN
Year
Volume
129
Issue
4
Pages
736-741
Physical description
Dates
published
2016-04
References
  • [1] H.K. Seok, Y.C. Kim, P.R. Cha, G.S. Han, Y.Y. Kim, S.Y. Cho, S.J. Yang, Korean J. Met. Mater. 22, 29 (2009)
  • [2] Y. Song, S. Zhang, J. Li, C. Zhao, X. Zhang, Acta Biomater. 6, 1736 (2010), doi: 10.1016/j.actbio.2009.12.020
  • [3] H.G. Seiler, H. Sigel, A. Sigel, Handbook on Toxicity of Inorganic Compounds, Marcel Dekker 1988
  • [4] R.J. Elin, Clin. Chem. 33, 1965 (1987)
  • [5] H. Zreiqat, C.R. Howlett, A. Zannettino, P. Evans, G. Schulze-Tanzil, C. Knabe, M. Shakibaei, J. Biomed. Mater. Res. 62, 175 (2002), doi: 10.1002/jbm.10270
  • [6] M.P. Staiger, A.M. Pietak, J. Huadmai, G. Dias, Biomaterials 27, 1728 (2006), doi: 10.1016/j.biomaterials.2005.10.003
  • [7] E.P.D. Garmo, J.T. Black, R.A. Kohser, DeGarmo's Materials and Processes in Manufacturing, John Wiley & Sons 2011
  • [8] L. J. Gibson, M.F. Ashby, Cellular Solids: Structure and Properties, Cambridge University Press 1997
  • [9] J.W. Choi, Y.M. Kong, H.E. Kim, I.S. Lee, J. Am. Ceram. Soc. 81, 1743 (1998)
  • [10] T.V. Thamaraiselvi, S. Rajeswari, Trends Biomater. Artif. Organs. 18, 9 (2004)
  • [11] F. Witte, V. Kaese, H. Haferkamp, E. Switzer, A. Meyer-Lindenberg, C.J. Wirth, H. Windhagen, Biomaterials 26, 3557 (2005), doi: 10.1016/j.biomaterials.2004.09.049
  • [12] C.E. Wen, M. Mabuchi, Y. Yamada, K. Shimojima, Y. Chino, T. Asahina, Scr. Mater. 45, 1147 (2001), doi: 10.1016/S1359-6462(01)01132-0
  • [13] H. Wang, Z.M. Shi, K. Yang, Adv. Mater. Res. 32, 207 (2008), doi: 10.4028/www.scientific.net/AMR.32.207
  • [14] H.Y. López, D.A. Cortés-Hernández, S. Escobedo, D. Mantovani, Key Engin. Mater. 309, 453 (2006), doi: 10.4028/www.scientific.net/KEM.309-311.453
  • [15] J.H. Ji, Y.K. Kim, I.S. Park, H.H. Park, T.S. Bae, M.H. Lee, Korean Soc. Dent. Mater. 39, 26 (2012)
  • [16] R.B. Figueiredo, T.G. Langdon, J. Mater. Sci. 44, 4758 (2009), doi: 10.1007/s10853-009-3725-z
  • [17] C.C. Koch, R.O. Scattergood, K.M. Youssef, E. Chan, Y.T. Zhu, J. Mater. Sci. 45, 4725 (2010), doi: 10.1007/s10853-010-4252-7
  • [18] B. Denkena, F. Witte, C. Podolsky, A. Lucas, Proc. 5th Euspen Int., 2005, p. 233
  • [19] S.G. Lee, Ph.D. Thesis, Pusan National University, 2012
  • [20] Z. Li, X. Gu, S. Lou, Y. Zheng, Biomaterials 29, 1329 (2008), doi: 10.1016/j.biomaterials.2007.12.021
  • [21] S.G. Steinemann, Corrosion of Surgical Implants - in Vivo and in Vitro Tests, John Wiley & Sons, 1980
  • [22] Y. Okazaki, S. Rao, T. Tateishi, Y. Ito, Mater. Sci. Eng. A 243, 250 (1998), doi: 10.1016/S0921-5093(97)00809-5
  • [23] K. Feser, M. Kietzmann, W. Baumer, C. Krause, F.W. Bach, J. Biomater. Appl. 25, 685 (2011), doi: 10.1177/0885328209360424
  • [24] A. Krause, N. von der Höh, D. Bormann, C. Krause, F.W. Bach, H. Windhagen, A. Meyer-Lindenberg,J. Mater. Sci. Mater. Med. 45, 624 (2010), doi: 10.1007/s10853-009-3936-3
  • [25] F. Witte, Acta Biomater. 6, 1680 (2010), doi: 10.1016/j.actbio.2010.02.028
  • [26] A. Zakiyuddin, M.Sc. Thesis, Chonnam National University, 2014
  • [27] N.T. Kirkland, N. Birbilis, M.P. Staiger, Acta Biomater. 8, 925 (2012), doi: 10.1016/j.actbio.2011.11.014
  • [28] C. Lorenz, J.G. Brunner, P. Kollmannsberger, L. Jaafar, B. Fabry, S. Virtanen, Acta Biomater. 5, 2783 (2009), doi: 10.1016/j.actbio.2009.04.018
  • [29] K.J. Park, M.W. Jung, J.H. Lee, J. Microelectronics Packaging Soc. 17, 71 (2010)
  • [30] M.H. Kim, Ph.D. Thesis, Pukyong National University, 2010
  • [31] D.K. Lee, M.Sc. Thesis, Pusan National University, 2010
  • [32] P.B. Srinivasan, C. Blawert, W. Dietzel, Mater. Sci. Eng. A 494, 401 (2008), doi: 10.1016/j.msea.2008.04.031
  • [33] Y. Zhang, C. Yan, F. Wang, H. Lou, C. Cao, Surf. Coat. Technol. 161, 36 (2002), doi: 10.1016/S0257-8972(02)00342-0
  • [34] H. Duan, K. Du, C. Yan, F. Wang, Electrochim. Acta. 51, 2898 (2006), doi: 10.1016/j.electacta.2005.08.026
  • [35] R. Kartika, M.Sc. Thesis, Yeungnam University, 2007
  • [36] Q. Zhao, X. Guo, X. Dang, J. Hao, J. Lai, K. Wang, Colloids Surf. B. Biointerfaces 102, 321 (2013), doi: 10.1016/j.colsurfb.2012.07.040
  • [37] A.Y. Kim, Ph.D. Thesis, Chonnam National University, 2014
  • [38] B.H. Kim, Ph.D. Thesis, Pusan National University, 2012
  • [39] J.C. Oh, T. Ohkubo, T. Mukai, K. Hono, Scr. Mater. 53, 675 (2005), doi: 10.1016/j.scriptamat.2005.05.030
  • [40] K.I. Kim, Ph.D. Thesis, Chonbuk National University, 2013
Document Type
Publication order reference
YADDA identifier
bwmeta1.element.bwnjournal-article-appv129n4083kz
Identifiers
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.