PL EN


Preferences help
enabled [disable] Abstract
Number of results
2016 | 129 | 4 | 687-689
Article title

Influence of Parameters on Dry Sliding of Chopped Bamboo Reinforced Epoxy Composites Based on the Taguchi Method

Content
Title variants
Languages of publication
EN
Abstracts
EN
Chopped bamboo-reinforced epoxy composites were fabricated and tested to investigate their tribological properties. Three different weight fractions of 6%, 8% and 10% were used as reinforcement in the composites. Wear behaviour of composites was investigated by pin on disc wear testing device. To analyse the results the design of experiments (DOE) approach by using the Taguchi method was employed. Three different parameters (load, sliding speed, weight fractions) with three levels were chosen in design of experiments. Signal to noise ratio and analysis of variance (ANOVA) were used to investigate the influence of parameters on the wear rate and the coefficient of friction. According to the results, load was the most effective parameter for both wear rate and coefficient of friction.
Keywords
EN
Year
Volume
129
Issue
4
Pages
687-689
Physical description
Dates
published
2016-04
References
  • [1] P. Kongkeaw, W. Nhuapeng, W. Thamajaree, J. Microscopy Society Thailand 4, 46 (2011)
  • [2] K. Gupta, Mater. Design 35, 467 (2012), doi: 10.1016/j.matdes.2011.09.010
  • [3] A.K. Mishra, R. Sheokand, R.K. Srivastava, Int. J. Sci. Res. Publ. 2, 1 (2012)
  • [4] S.V. Prasat, R. Subramanian, N. Radhika, B. Anandavel, L. Arun, N. Praveen, Eur. J. Sci. Res. 53, 280 (2011)
  • [5] T.R. Hemanth Kumar, R.P. Swamyand, T.K. Chandrashekar, J. Miner. Mater. Character. Eng. 10, 1179 (2011), doi: 10.4236/jmmce.2011.1012090
  • [6] S. Basavarajappa, G. Chandramohan, J. Mater. Sci. Technol. 21, 845 (2005)
  • [7] S. Koksal, F. Ficici, O. Savas, Mater. Design 42, 124 (2012), doi: 10.1016/j.matdes.2012.05.048
  • [8] Y. Sahin, Tribol. Int. 43, 939 (2010), doi: 10.1016/j.triboint.2009.12.056
  • [9] Y. Sahin, Mater. Sci. Eng. A 408, 1 (2005), doi: 10.1016/j.msea.2004.11.012
  • [10] G. Taguchi, Taguchi on Robust Technology Development, ASME, New York 1993, doi: 10.1115/1.800288
  • [11] C. Soutis, Mater. Sci. Eng. A 412, 171 (2005), doi: 10.1016/j.msea.2005.08.064
  • [12] K. Palanikumar, Int. J. Adv. Manu. Technol. 36, 19 (2008), doi: 10.1007/s00170-006-0811-0
Document Type
Publication order reference
YADDA identifier
bwmeta1.element.bwnjournal-article-appv129n4070kz
Identifiers
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.