PL EN


Preferences help
enabled [disable] Abstract
Number of results
2016 | 129 | 4 | 661-664
Article title

Corrosion Behavior of in-Situ AlB₂/Al-Cu Metal Matrix Composite

Content
Title variants
Languages of publication
EN
Abstracts
EN
The aim of this study was to fabricate 30 wt.% AlB₂/Al-Cu composites using in-situ casting processes and to investigate the corrosion behavior of the composites and of the matrix material in various media. The electrochemical parameters were obtained from potentiodynamic polarization curves. The composites were prepared by liquid reaction of aluminum matrix with boron oxide at 1400°C. The results show that the corrosion resistance of the composite was higher than that of the matrix in selected corrosion media. The anodic corrosion current density values were decreased by reinforcing AlB₂ particles.
Keywords
EN
Publisher

Year
Volume
129
Issue
4
Pages
661-664
Physical description
Dates
published
2016-04
Contributors
author
  • Yildiz Technical University, Faculty of Naval Architecture and Maritime, 34349 Istanbul, Turkey
author
  • Yildiz Technical University, Faculty of Naval Architecture and Maritime, 34349 Istanbul, Turkey
author
  • Yildiz Technical University, Faculty of Naval Architecture and Maritime, 34349 Istanbul, Turkey
author
  • Yildiz Technical University, Department of Metallurgical and Material Engineering, 34220 Istanbul, Turkey
author
  • Sakarya University, Department of Metallurgical and Materials Engineering, 54187 Sakarya, Turkey
References
  • [1] S.C. Tjong, Z.Y. Ma, Mater. Sci. Eng.: B 29, 49 (2000), doi: 10.1016/S0927-796X(00)00024-3
  • [2] J.P. Tu, W. Rong, S.Y. Guo, Y.Z. Yang, Wear 255, 832 (2003), doi: 10.1016/S0043-1648(03)00115-7
  • [3] X. Wang, J. Alloy. Compd. 403, 283 (2005), doi: 10.1016/j.jallcom.2005.04.204
  • [4] Y. Watanabe, N. Yamanakab, Y. Fukuic, Compos. Part A-Appl. S. 29, 595 (2008), doi: 10.1016/S1359-835X(97)00121-8
  • [5] R. Kayikci, O. Savas, S. Koksal, A. Demir. Acta. Phys. Pol. A. 125, 590 (2014), doi: 10.12693/APhysPolA.125.590
  • [6] S. Koksal, F. Ficici, R. Kayikci, O. Savas. J. Compos. Mater. 48, 1801 (2014), doi: 10.1177/0021998313490584
  • [7] A.J. Trowsdale, B. Noble, S.J. Harris. I.S.R. Gibbins, G.E. Thompson, G.C. Wood, Corros. Sci. 38, 177 (1996), doi: 10.1016/0010-938X(96)00098-4
  • [8] E.E. Oguzie, Corros. Sci. 49, 1527 (2007), doi: 10.1016/j.corsci.2006.08.009
  • [9] K.C. Emergul, A.A. Aksut, Corros. Sci. 42, 2051 (2000), doi: 10.1016/S0010-938X(00)00055-X
  • [10] Corrosion Resistance of Aluminum and Magnesium Alloys: Understanding, Performance, and Testing, Wiley Series in Corrosion, Eds. E. Ghali, R.W. Revie, Wiley, 2010
  • [11] Corrosion of Aluminum and Aluminum Alloys, Ed. J.R. Davis, ASM International, 2000
  • [12] Ö. Savaş, R. Kayikci, Mater. Design. 51, 641 (2013), doi: 10.1016/j.matdes.2013.04.049
  • [13] American Society for Testing and Materials, Standard test method for density and specific gravity (relative density) of plastics by displacement, ASTM D792, 2000
  • [14] American Society for Testing and Materials, Standard test method for rubber property-durometer hardness, ASTM D2240, 2002
  • [15] C. Deppisch, G. Liu, J.K. Shang, Mat. Sci. Eng. A-Struct. 225, 153 (1997), doi: 10.1016/S0921-5093(96)10575-X
  • [16] C. Deppisch, G. Liu, A. Hall, Y. Xu, A. Zangvil, J.K. Shang, J. Mater. Res. 13, 3485 (1998), doi: 10.1557/JMR.1998.0476
  • [17] Ö. Savaş, R. Kayikci, J. Alloys. Compd. 580, 232 (2013), doi: 10.1016/j.jallcom.2013.05.112
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv129n4063kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.