PL EN


Preferences help
enabled [disable] Abstract
Number of results
2016 | 129 | 4 | 639-641
Article title

A Novel Method for Manufacturing Polymer/Metal Hybrid Structures

Authors
Content
Title variants
Languages of publication
EN
Abstracts
EN
In this study, a method for manufacturing polymer/metal hybrid structure is presented in which traditional plastic injection machine was converted to plastic injection forming (PIF). In this method, deforming of the metal and adhering the metal to the polymer is done in one step. In the experimental study, a special mold within rectangular cavity was used during PIF process. Aluminum plates of different thicknesses were used as the metal parts of the structure. The injected polymers were pure polystyrene and elastomer-added polystyrene. The deformability of the Al plates was examined under different injection pressures. In order to provide adhesion between metal and polymer, an adhesive of elastomeric nature was applied on the metal plate prior to injection molding. Bending test was applied to determine the flexural strength and maximum deflection of the polymer/metal hybrid structures. The obtained results were satisfactorily acceptable in improving the method for designing and manufacturing polymer/metal hybrid structures in one step.
Keywords
EN
Contributors
author
  • Department of Mechanical Engineering, Yıldız Technical University, Istanbul, Turkey
author
  • Department of Mechanical Engineering, Yıldız Technical University, Istanbul, Turkey
References
  • [1] P.F. Bariani, S. Bruschi, A. Ghiotti, G. Lucchetta, CIRP Ann. - Manuf. Technol. 56, 261 (2007), doi: 10.1016/j.cirp.2007.05.061
  • [2] M. Chen, X. Zhang, Q. Lei, F. Jiexing, Int. J. Mach. Tool. Manuf. 42, 375 (2002), doi: 10.1016/S0890-6955(01)00125-0
  • [3] M. Grujicic, V. Sellappan, M.A. Omar, N. Seyr, J. Mater. Proc. Tech. 197, 363 (2008), doi: 10.1016/j.jmatprotec.2007.06.058
  • [4] O.J. Zoellner, J.A. Evans, in: ANTEC 2002 Annual Technical Conference, Sanfrancisco, CA 2002, p. 1
  • [5] G. Gutscher, H.C. Wu, T. Altan, J. Mater. Proces. Tech. 146, 1 (2004), doi: 10.1016/S0924-0136(03)00838-0
  • [6] F.J. Boerio, P. Shah, J. Adhesion 81, 645 (2005), doi: 10.1080/00218460590954656
  • [7] H.C.E Van Der Aa, A.S. Verdier, H.G.J De Wolf, WO Patent No. 03057446 (2003)
  • [8] A.E. Tekkaya, M.M. Hussain, J. Witulski, Prod. Engin. 6, 385 (2012), doi: 10.1007/s11740-012-0392-8
  • [9] D.H. Berry, A. Namkanisorn, J. Adhesion 81, 347 (2005), doi: 10.1080/00218460590944657
  • [10] H. Sasaki, I Kobayashi, S. Sai, T. Omoto, K. Mori, J. Polym. Tech. 55, 470 (1998), doi: 10.1295/koron.55.470
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv129n4057kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.