Wear Behavior of DIN 1.2210 Steel Modified by a Pulse Plasma Technique

• Authors: Y. Özbek , T. Gökkaya , C. Yavaşcan
• Languages of publication: EN

Abstracts

EN

The microstructure and wear properties of pulse plasma treated AISI 4140 steel was investigated. The surface properties of the materials have been improved by modifying the surfaces of the DIN 1.2210 steel with pulse plasma technique. The sample surfaces have been modified by pulse plasma with C₃H₈, nitrogen and O₂ gases. Two different distances between the sample and nozzle and three different numbers of pulse were determined for modification process and the surface process was implemented by using tungsten electrode with 800 µF battery capacity. The optical images were taken of the materials which the surfaces were improved by using pulse plasma technique. The surface modified samples were subjected to X-ray diffraction analysis. Wear tests were performed in a linear wear test machine with 0.15 m/s constant sliding speed under 5 N loads for 200 m sliding distance. The wear rate was changed in accordance with process parameters. The wear resistance increased in the surface modified specimens was compared to that of non-modified ones. Worn surfaces of specimens were studied by scanning electron microscope and energy dispersive spectroscopy analyses techniques. It is determined that the thickness of modification layer changes regarding to the amount of new phases and sample-nozzle distance. It is approved the increase on wear resistance related to wolfram diffusion.

Keywords

EN

81.15.Fg

Discipline

• 81.15.Fg: Pulsed laser ablation deposition

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2016
• Volume: 129
• Issue: 4
• Pages: 588-591

Dates

published

2016-04

Contributors

author

Y. Özbek

• Sakarya University, Metallurgical and Materials Engineering Department, Esentepe Campus, 54187, Turkey

author

T. Gökkaya

• Sakarya University, Metallurgical and Materials Engineering Department, Esentepe Campus, 54187, Turkey

author

C. Yavaşcan

• Sakarya University, Metallurgical and Materials Engineering Department, Esentepe Campus, 54187, Turkey

References

• [1] Y. Sahin, M. Erdogan, V. Kilicli, Mater. Sci. Eng. A 444, 31 (2007), doi: 10.1016/j.msea.2006.06.071
• [2] Yu. Chivel, O. Kuznechik, Surf. Coat. Technol. 205, S347 (2011), doi: 10.1016/j.surfcoat.2011.03.138
• [3] Y.Y. Özbek, M. Durman, H. Akbulut, Tribol. Trans. 52, 213 (2009), doi: 10.1080/10402000802369721
• [4] http://www.osmanli-bohler.com/upload/pdf/soguk/K510.pdf, Şubat-2015
• [5] C.X. Li, Y. Sun, T. Bell, Mater. Sci. Eng. A 292, 18 (2000), doi: 10.1016/S0921-5093(00)01017-0
• [6] S.Y. Sirin, K. Sirin, E. Kaluc, Mater. Character. 59, 351 (2008), doi: 10.1016/j.matchar.2007.01.019
• [7] Y.Y. Ozbek, C. Sarioglu, M. Durman, Vacuum 106, 11 (2014), doi: 10.1016/j.vacuum.2014.03.001
• [8] V.V. Uglov, V.M. Anishchik, N.N. Cherenda, Yu.V. Sveshnikov, V.M. Astashynski, E.A. Kostyukevich, A.M. Kuzmitski, V.V. Askerko, Surf. Coat. Technol. 202, 2439 (2008), doi: 10.1016/j.surfcoat.2007.08.045
• [9] E. Gualtieri, A. Borghi, L. Calabri, N. Pugno, S. Valeri, Tribol. Int. 42, 699 (2009), doi: 10.1016/j.triboint.2008.09.008

Identifiers

DOI

10.12693/APhysPolA.129.588