Cavitation Damage Behavior in Seawater for Al-Mg Alloy Arc Thermal Spray Coating with Mg Content

• Authors: I. Park , S. Kim
• Languages of publication: EN

Abstracts

EN

Al arc thermal spray coating materials are widely used to prevent the corrosion of steel structure materials in marine environment. To improve the durability of the Al alloy thermal spray coating layer, Al-Mg alloy arc thermal spray coating was performed with different Mg contents. Furthermore, the cavitation experiment was performed in natural seawater to evaluate the durability of the thermal spray coating layer, and the damaged surface was analyzed with a scanning electron microscope and a 3D microscope. As a result, the durability of the Al-Mg alloy thermal spray coating layer improved by the addition of Mg, and the Al-3%Mg thermal spray coating layer presented the best characteristics.

Keywords

EN

52.77.Fv; 81.15.Rs

Discipline

• 52.77.Fv: High-pressure, high-current plasmas (plasma spray, arc welding, etc.)(see also 81.15.Rs Spray coating techniques)
• 81.15.Rs: Spray coating techniques

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2016
• Volume: 129
• Issue: 4
• Pages: 572-577

Dates

published

2016-04

Contributors

author

I. Park

• Division of Marine Engineering, Mokpo National Maritime University, 91, Haeyangdaehak-Ro Mokpo-si, Jeollanam-do, 530-729, Korea

author

S. Kim

• Division of Marine Engineering, Mokpo National Maritime University, 91, Haeyangdaehak-Ro Mokpo-si, Jeollanam-do, 530-729, Korea

References

• [1] Z. Sun, X.Q. Kang, X.H. Wang, Mater. Des. 26, 59 (2005), doi: 10.1016/j.matdes.2004.04.003
• [2] E. Heitz, Corrosion 47, 135 (1991), doi: 10.5006/1.3585229
• [3] M.S. Han, S.J. Lee, S.K. Jang, S.J. Kim, Corros. Sci. Technol. 9, 317 (2010)
• [4] S.J. Kim, S.J. Lee, I.J. Kim, S.K. Kim, M.S. Han, S.K. Jang, Trans. Nonferrous Met. Soc. China 23, 1002 (2013), doi: 10.1016/S1003-6326(13)62559-5
• [5] S.J. Kim, S.J. Lee, Trans. Nonferrous Met. Soc. China 21, 2798 (2011), doi: 10.1016/S1003-6326(11)61126-6
• [6] Y.Q. Zhang, Z.X. Ding, Y. Fan, China Surf. Eng. 6, 25 (2005)
• [7] C.T. Kwok, F.T. Cheng, H.C. Man, Mater. Sci. Eng. A 290, 74 (2000)
• [8] D.S. Won, K.S. Jeon, Y.T. Hho, J.H. Lee, Corros. Sci. Technol. 23, 215 (1994)
• [9] I. Hansson, K.A. Morch, J. Appl. Phys. 51, 4651 (1980), doi: 10.1063/1.328335
• [10] A. Thiruvengadam, H.S. Preiser, J. Ship Res. 8, 39 (1964)
• [11] S.J. Kim, K.H. Kim, S.J. Lee, Corros. Sci. Technol. 10, 136 (2011)
• [12] L. Hauschmann, J. Siegi, J. Karlik, I. Kunes, P. Chraska, in: Proc. Int. Thermal Spray Conf. and Exposition, Ed. C.C. Berndt, ASM International, Orlando 1992, p. 723
• [13] G. Hou, X. Zhao, H. Zhou, J. Lu, Y. An, J. Chen, J. Yang, Wear 311, 81 (2014), doi: 10.1016/j.wear.2013.12.026
• [14] M.C. Park, K.N. Kim, G.S. Shin, S.J. Kim, Wear 274, 28 (2012), doi: 10.1016/j.wear.2011.08.011
• [15] A.K. Krella, Prog. Org. Coat. 70, 318 (2011), doi: 10.1016/j.porgcoat.2010.11.013

Identifiers

DOI

10.12693/APhysPolA.129.572