PL EN


Preferences help
enabled [disable] Abstract
Number of results
2016 | 129 | 4 | 572-577
Article title

Cavitation Damage Behavior in Seawater for Al-Mg Alloy Arc Thermal Spray Coating with Mg Content

Authors
Content
Title variants
Languages of publication
EN
Abstracts
EN
Al arc thermal spray coating materials are widely used to prevent the corrosion of steel structure materials in marine environment. To improve the durability of the Al alloy thermal spray coating layer, Al-Mg alloy arc thermal spray coating was performed with different Mg contents. Furthermore, the cavitation experiment was performed in natural seawater to evaluate the durability of the thermal spray coating layer, and the damaged surface was analyzed with a scanning electron microscope and a 3D microscope. As a result, the durability of the Al-Mg alloy thermal spray coating layer improved by the addition of Mg, and the Al-3%Mg thermal spray coating layer presented the best characteristics.
Keywords
EN
Contributors
author
  • Division of Marine Engineering, Mokpo National Maritime University, 91, Haeyangdaehak-Ro Mokpo-si, Jeollanam-do, 530-729, Korea
author
  • Division of Marine Engineering, Mokpo National Maritime University, 91, Haeyangdaehak-Ro Mokpo-si, Jeollanam-do, 530-729, Korea
References
  • [1] Z. Sun, X.Q. Kang, X.H. Wang, Mater. Des. 26, 59 (2005), doi: 10.1016/j.matdes.2004.04.003
  • [2] E. Heitz, Corrosion 47, 135 (1991), doi: 10.5006/1.3585229
  • [3] M.S. Han, S.J. Lee, S.K. Jang, S.J. Kim, Corros. Sci. Technol. 9, 317 (2010)
  • [4] S.J. Kim, S.J. Lee, I.J. Kim, S.K. Kim, M.S. Han, S.K. Jang, Trans. Nonferrous Met. Soc. China 23, 1002 (2013), doi: 10.1016/S1003-6326(13)62559-5
  • [5] S.J. Kim, S.J. Lee, Trans. Nonferrous Met. Soc. China 21, 2798 (2011), doi: 10.1016/S1003-6326(11)61126-6
  • [6] Y.Q. Zhang, Z.X. Ding, Y. Fan, China Surf. Eng. 6, 25 (2005)
  • [7] C.T. Kwok, F.T. Cheng, H.C. Man, Mater. Sci. Eng. A 290, 74 (2000)
  • [8] D.S. Won, K.S. Jeon, Y.T. Hho, J.H. Lee, Corros. Sci. Technol. 23, 215 (1994)
  • [9] I. Hansson, K.A. Morch, J. Appl. Phys. 51, 4651 (1980), doi: 10.1063/1.328335
  • [10] A. Thiruvengadam, H.S. Preiser, J. Ship Res. 8, 39 (1964)
  • [11] S.J. Kim, K.H. Kim, S.J. Lee, Corros. Sci. Technol. 10, 136 (2011)
  • [12] L. Hauschmann, J. Siegi, J. Karlik, I. Kunes, P. Chraska, in: Proc. Int. Thermal Spray Conf. and Exposition, Ed. C.C. Berndt, ASM International, Orlando 1992, p. 723
  • [13] G. Hou, X. Zhao, H. Zhou, J. Lu, Y. An, J. Chen, J. Yang, Wear 311, 81 (2014), doi: 10.1016/j.wear.2013.12.026
  • [14] M.C. Park, K.N. Kim, G.S. Shin, S.J. Kim, Wear 274, 28 (2012), doi: 10.1016/j.wear.2011.08.011
  • [15] A.K. Krella, Prog. Org. Coat. 70, 318 (2011), doi: 10.1016/j.porgcoat.2010.11.013
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv129n4040kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.