Silane Coupling Efficiency on Thermal Properties of Volcanic Ash Filled PPS Composites

• Authors: T. Kutluk , O. Çoban , M. Bora , S. Fidan , T. Sınmazçelik
• Languages of publication: EN

Abstracts

EN

Thermal properties of volcanic ash filled polyphenylene sulfide (PPS) composites have been investigated with respect to surface treatment that was conducted with 3-aminopropyltriethoxysilane (3-APTS) which had an organic functional group. Volcanic ash/PPS composite samples were prepared by using DSM Xplore 15 ml twin screw microcompounder and DSM Xplore 12 ml injection molding machines. The content of volcanic ash in composite samples was varied as 10 and 15 wt%. Volcanic ash filler dispersion and adhesion between volcanic ash particles and PPS matrix were examined by scanning electron microscopy. Thermal properties such as crystallization and melting behavior were investigated by TA Instruments Q200 differential scanning calorimeter. According to the test results, the relation between the thermal properties and surface treatment was determined as a function of melting temperature and melting enthalpy. Additionally, crystallization behavior was investigated according to surface treatment.

Keywords

EN

81.05.Qk

Discipline

• 81.05.Qk: Reinforced polymers and polymer-based composites

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2016
• Volume: 129
• Issue: 4
• Pages: 498-500

Dates

published

2016-04

Contributors

author

T. Kutluk

• Kocaeli University, Department of Chemical Engineering, 41380, Umuttepe-Kocaeli, Turkey

author

O. Çoban

• Kocaeli University, Faculty of Aeronautics and Astronautics, 41285, Kartepe-Kocaeli, Turkey

author

M. Bora

• Kocaeli University, Faculty of Aeronautics and Astronautics, 41285, Kartepe-Kocaeli, Turkey

author

S. Fidan

• Kocaeli University, Faculty of Aeronautics and Astronautics, 41285, Kartepe-Kocaeli, Turkey

author

T. Sınmazçelik

• Kocaeli University, Department of Mechanical Engineering, 41380, Umuttepe-Kocaeli, Turkey

References

• [1] L.C. Lopez, G.L. Wilkes, J. Macromol. Sci. Rev. Macromol. Chem. Phys. C29, 83 (1989), doi: 10.1080/07366578908055165
• [2] L.I. Minkova, M. Paci, M. Pracella, P. Magagnini, Polym. Eng. Sci. 32, 57 (1992), doi: 10.1002/pen.760320110
• [3] A.M. Díez-Pascual, M. Naffakh, Compos. Part. A-Appl. Sci. 54, 10 (2013), doi: 10.1016/j.compositesa.2013.06.018
• [4] C.J. Schwartz, S. Bahadur, Wear 237, 261 (2000), doi: 10.1016/S0043-1648(99)00345-2
• [5] S. Bahadur, C. Sunkara, Wear 258, 1411 (2005), doi: 10.1016/j.wear.2004.08.009
• [6] E. Avcu, O. Çoban, M.O. Bora, S. Fidan, T. Sınmazçelik, O. Ersoy, Polym. Compos. 35, 1826 (2014), doi: 10.1002/pc.22847
• [7] P.N. Lemougna, U.F.C. Melo, M.P. Delplancke, H. Rahier, Ceram. Int. 40, 811 (2014), doi: 10.1016/j.ceramint.2013.06.072
• [8] S.L. Gao, J.K. Kim, Compos. Part. A-Appl. Sci. 31, 517 (2000), doi: 10.1016/S1359-835X(00)00009-9
• [9] A.M. Dıez-Pascual, J. Guan, B. Simard, M.A. Gomez-Fatou, Compos. Part. A-Appl. Sci. 43, 997 (2012), doi: 10.1016/j.compositesa.2011.11.002
• [10] N. Ning, S. Fu, W. Zhang, F. Chen, K. Wang, H. Deng, Q. Zhang, Q. Fu, Prog. Polym. Sci. 37, 1425 (2012), doi: 10.1016/j.progpolymsci.2011.12.005
• [11] H. Skaff, T. Emrick, Angew. Chem. Int. Edit. 43, 5383 (2004), doi: 10.1002/anie.200453822
• [12] Q. Peng, D.M.Y. Lai, E.T. Kang, K.G. Neoh, Macromolecules 39, 5577 (2006), doi: 10.1021/ma0607362
• [13] Y. Taniguchi, M. Ogawa, W. Gang, H. Saitoh, K. Fujiki, T. Yamauchi, N. Tsubokawa, Mater. Chem. Phys. 108, 397 (2008), doi: 10.1016/j.matchemphys.2007.10.013
• [14] R. Walter, K. Friedrich, V. Privalko, A.J. Savadori, J. Adhesion 64, 87 (1997), doi: 10.1080/00218469708010533
• [15] Y. Yang, H. Duan, S. Zhang, P. Niu, G. Zhang, S. Long, X. Wang, J. Yang, Compos. Sci. Technol. 75, 28 (2013), doi: 10.1016/j.compscitech.2012.11.006
• [16] S. Zhou, Q. Zhang, C. Wu, J. Huang, Mater. Des. 44, 493 (2013), doi: 10.1016/j.matdes.2012.08.029

Identifiers

DOI

10.12693/APhysPolA.129.498