Mechanical Characteristics of As₂S₃ Glasses Induced by Doping with Bismuth

• Authors: M. Šiljegović , S. Lukić-Petrović , D. Petrović , I. Videnović , I. Turyanytsa
• Languages of publication: EN

Abstracts

EN

This paper presents and discusses the results of the instrumented indentation test of the samples of the system Bi_{x}(As₂S₃)_{100-x}, x= 1.5, 3, 5, and 7 at.%. Measurements of mechanical parameters were performed using a Fischerscope HM2000 S nanoindentation device. The experimental data obtained by measuring the microhardness parameters were used to determine some other mechanical quantities that are important for the characterization of the examined materials in terms of their potential applications. For the first three compositions, the results indicated an increase in the microhardness with the increase in the content of doping atoms, which can be interpreted as an enhancement of the strength and stiffness of the structural network. The lower value of microhardness of the sample with the maximum content of Bi can BE associated with the specific structure of this composition. The pronounced indentation size effect was also detected on the indentation curve in the range of smaller loads. According to the model of elastic-plastic deformation, applied for the description of indentation size effect measured for the investigated chalcogenides, the largest value of the elastic recovery was observed for the sample Bi₇(As₂S₃)₉₃. The calculated values of the elasticity modulus show that the glass with x= 5 at.% Bi is characterized with the highest atomic packing density.

Keywords

EN

61.43.Fs; 62.20.-x; 62.20.D-; 64.75.Gh

Discipline

• 62.20.-x: Mechanical properties of solids
• 62.20.D-: Elasticity(for materials treatment effects on elastic properties, see 81.40.Jj)
• 61.43.Fs: Glasses
• 64.75.Gh: Phase separation and segregation in model systems (hard spheres, Lennard-Jones, etc.)

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2016
• Volume: 129
• Issue: 4
• Pages: 488-491

Dates

published

2016-04

Contributors

author

M. Šiljegović

• University of Novi Sad, Faculty of Sciences, Trg Dositeja Obradovića 4, 21000 Novi Sad, Serbia

author

S. Lukić-Petrović

• University of Novi Sad, Faculty of Sciences, Trg Dositeja Obradovića 4, 21000 Novi Sad, Serbia

author

D. Petrović

• University of Novi Sad, Faculty of Sciences, Trg Dositeja Obradovića 4, 21000 Novi Sad, Serbia

author

I. Videnović

• University of Belgrade, Faculty of Physics, Studentski trg 12, 11000 Belgrade, Serbia

author

I. Turyanytsa

• Uzhhorod National University, Faculty of Engineering, 14-a Universytetska Str., Uzhhorod, 88000, Ukraine

References

• [1] A.K. Pattanaik, P.S. Robi, A. Srinivasan, J. Opto-electron. Adv. Mater. 5, 35 (2003)
• [2] S.V. Boycheva, V.S. Vassilev, P. Petkova, J. Opto-electron. Adv. Mater. 3, 503 (2001)
• [3] M. Imran, F. Hussain, M. Rashid, S.A. Ahmed, Chin. Phys. B 21, 126802 (2012), doi: 10.1088/1674-1056/21/12/126802
• [4] J.P. Guin, T. Rouxel, J.C. Sanglebœ uf, J. Am. Ceram. Soc. 85, 1545 (2002), doi: 10.1111/j.1151-2916.2002.tb00310.x
• [5] http://www.helmut-fischer.com
• [6] M.V. Šiljegović, S.R. Lukić-Petrović, D.M. Petrović, D.L. Sekulić, G.R. Štrbac, F. Skuban, in: The 4th Int. Conf. on the Physics of Optical Materials and Devices, ICOM 2015, Book of Abstracts, p. 205
• [7] M.V. Šiljegović, S.R. Lukić-Petrović, D.L. Sekulić, A.S. Tverjanovich, Mater. Sci. Semicond. Process. 38, 324 (2015), doi: 10.1016/j.mssp.2014.11.018
• [8] M.V. Šiljegović, D.L. Sekulić, S.R. Lukić-Petrović, D.M. Petrović, J. Mater. Sci. Mater. Electron. 27, 1655 (2015), doi: 10.1007/s10854-015-3937-8
• [9] S.R. Lukić, D.M. Petrović, F. Skuban, L. Šiđanin, I.O. Gúth, Appl. Surf. Sci. 252, 7917 (2006), doi: 10.1016/j.apsusc.2005.09.062
• [10] K. Sangwal, B. Surowska, P. Blaziak, Mater. Chem. Phys. 77, 511 (2002), doi: 10.1016/S0254-0584(02)00086-X
• [11] H.J. Weiss, Phys. Status Solidi 99, 491 (1987), doi: 10.1002/pssa.2210990219
• [12] M.L. Tarkania, J.P. Neumann, L. Raymond, in: The Science of Hardness Testing and Its Research Application, Eds. J.H. Westbrook, H. Conrad, ASME, Metal Park, OH 1973, p. 187
• [13] W.C. Oliver, G.M. Pharr, J. Mater. Res. 7, 1564 (1992), doi: 10.1557/JMR.1992.1564
• [14] P. Gadaud, S. Pautrot, J. Non-Cryst. Sol. 316, 146 (2003), doi: 10.1016/S0022-3093(02)01947-6
• [15] E. Le Bourhis, P. Gadaud, J.P. Guin, N. Tournerie, X.H. Zhang, J. Lucas, T. Rouxel, Scr. Mater. 45, 317 (2001), doi: 10.1016/S1359-6462(01)01034-X

Identifiers

DOI

10.12693/APhysPolA.129.488