PL EN


Preferences help
enabled [disable] Abstract
Number of results
2016 | 129 | 4 | 455-458
Article title

Study of the Nickel-Tungsten and Nickel-Cobalt Coatings Plated on Ductile Iron

Authors
Content
Title variants
Languages of publication
EN
Abstracts
EN
Hard coatings such as nickel, chromium and tungsten can improve the surface properties of the substrate. The coating surfaces have been developed for increase of the wear resistance, hardness or corrosion resistance for industrial applications. Electroplating methods generally used to obtain producing these hard coatings and a novel brush plating process has the potential as an alternative of electroplating for industrial applications. In the present work, nickel-tungsten and nickel-cobalt alloys are coated on ductile iron by brush plating for surface characterization. Scanning electron microscopy and energy dispersive spectrometry were used to investigate the coating microstructures, surface morphology. The hardness of plating layers was measured. The results indicated that the nickel-tungsten coating was harder than nickel-cobalt coating. Excellent adhesion was obtained after nickel-cobalt plating. The tribological resistances were also significantly improved, as confirmed by the decrease friction coefficient and wear rate.
Keywords
EN
Contributors
author
  • Sakarya University, Faculty of Engineering, Department of Metallurgical and Materials Engineering, Sakarya, 54187, Turkey
author
  • Technical University of Varna, 1. Studentska Str., 9010 Varna, Bulgaria
References
  • [1] B. Subramanian, S. Mohan, S. Jayakrishnan, Surf. Coat. Technol. 201, 1145 (2006), doi: 10.1016/j.surfcoat.2006.01.042
  • [2] D.A. Molloy, S. Malinov, T. McNally, P. Hill, Prog. Organic Coat. 70, 330 (2011), doi: 10.1016/j.porgcoat.2010.09.030
  • [3] Y. Qian, J. Tan, Q. Liu, H. Yu, R. Xing, H. Yang, Surf. Coat. Technol. 205, 3909 (2011), doi: 10.1016/j.surfcoat.2010.12.032
  • [4] B. Wu, B. Xu, B. Zhang, Y. Lü, Surf. Coat. Technol. 201, 6933 (2007), doi: 10.1016/j.surfcoat.2006.12.022
  • [5] N.K. Reddy, M. Devika, E.S.R. Gopal, Crit. Rev. Solid State Mater. Sci. 40, 359 (2015), doi: 10.1080/10408436.2015.1053601
  • [6] Z. Aydın, G. Aldıç, H. Çimenoğlu, Arch. Mater. Sci. Eng. 65, 87 (2014)
  • [7] D. Vanek, Metal Finishing 108/9, 25 (2010), doi: 10.1016/S0026-0576(10)80185-0
  • [8] B. Wu, X. Yu, B. Zhang, B. Xu, Surf. Coat. Technol. 202, 1975 (2008), doi: 10.1016/j.surfcoat.2007.08.031
  • [9] X. Xie, L. Zhang, J. Xiao, Z. Qian, T. Zhang, K. Zhou, Trans. Nonferrous Met. Soc. China 25, 3029 (2015), doi: 10.1016/S1003-6326(15)63930-9
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv129n4008kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.