Effect of Deformation on the Transformation Temperatures of Martensite and Bainite Structures in Cu-9.97%Al-4.62%Mn Alloy

• Authors: E. Aldirmaz
• Languages of publication: EN

Abstracts

EN

At present study of Cu-9.97%Al-4.62%Mn alloy system is used. Some physical properties of martensitic and bainite phase transformatios in Cu-9.97%Al-4.62%Mn (wt%) alloy were investigated by means of scanning electron microscopy and differential scanning calorimetry. In scanning electron microscope observations of Cu-9.97%Al-4.62%Mn alloy were noted two kinds of martensitic phases. These phases were defined as β'₁ (M18R) and γ'₁ (2H) martensites structures. According to differential scanning calorimetry measurement results, the deformation induced temperature is expected to be higher than the thermally induced temperature in Cu-9.97%Al-4.62%Mn alloy for martensite and bainite structures.

Keywords

EN

61.66.Dk; 68.37.Hk; 81.30.Kf; 81.30.Mh; 62.20.-x; 65.40.-b

Discipline

• 65.40.-b: Thermal properties of crystalline solids
• 62.20.-x: Mechanical properties of solids
• 68.37.Hk: Scanning electron microscopy (SEM) (including EBIC)
• 81.30.Mh: Solid-phase precipitation(for precipitation hardening, see 81.40.Cd)
• 61.66.Dk: Alloys
• 81.30.Kf: Martensitic transformations

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2016
• Volume: 129
• Issue: 1
• Pages: 40-42

Dates

published

2016-01

received

2014-06-26

(unknown)

2015-06-10

Contributors

author

E. Aldirmaz

• Department of Physics, Faculty of Science and Arts, Amasya University, 05100 Amasya, Turkey

References

• [1] J. Chen, Z. Li, Y.Y. Zhao, J. Alloys Comp. 480, 481 (2009), doi: 10.1016/j.jallcom.2009.01.104
• [2] J. Ma, I. Karaman, R.D. Noebe, Int. Mater. Rev. 55, 257 (2010), doi: 10.1179/095066010X12646898728363
• [3] J. Soltys, Phys. Status Solidi A 63, 401 (1981), doi: 10.1002/pssa.2210630204
• [4] U.S. Mallik, V. Sampath, Mater. Sci. Eng. A 478, 48 (2008), doi: 10.1016/j.msea.2007.05.073
• [5] E. Aldırmaz, I. Aksoy, Arab. J. Sci. Eng. 39, 575 (2014), doi: 10.1007/s13369-013-0871-z
• [6] E. Aldırmaz, I. Aksoy, J. Min. Metall. Sect. B-Metall. 50, 87 (2014), doi: 10.2298/JMMB120704004A
• [7] M.L. Castro, R. Romero, Mater. Sci. Eng.-A Struct. 287, 66 (2000), doi: 10.1016/S0921-5093(00)00810-8
• [8] Z.Y. Pan, Z. Li, M.P. Wang, C.P. Deng, S.H. Li, F. Zheng, Mater. Sci. Eng. 467, 104 (2007), doi: 10.1016/j.msea.2007.02.123
• [9] V. Recarte, R.B. Perez-Saez, E.H. Bocanegra, M.L. Nó, J. San Juan, Metall. Mater. Trans. A 33, 2581 (2002), doi: 10.1007/s11661-002-0379-8
• [10] J. Malimanek, N. Zarubova, Scr. Metall. Mater. 32, 1347 (1995), doi: 10.1016/0956-716X(95)00169-V
• [11] P. Villars, A. Prince, H. Okamoto, Handbook of Ternary Alloy Phase Diagrams, Vol. 3, ASM International. 1995, p. 3297
• [12] S.M. Chentouf, M. Bouabdallah, H. Cheniti, A. Eberhardt, E. Patoor, A. Sari, Mater. Charact. 61, 1187 (2010), doi: 10.1016/j.matchar.2010.07.009
• [13] U.S. Mallik, V. Sampath, J. Alloys Comp. 459, 142 (2008), doi: 10.1016/j.jallcom.2007.04.254
• [14] J.L. Pelegrina, R. Romero, Mater. Sci. Eng. A 282, 16 (2000), doi: 10.1016/S0921-5093(99)00792-3
• [15] H.K.D.H. Bhadeshia, D.V. Edmonds, Acta Metall. 28, 1265 (1980), doi: 10.1016/0001-6160(80)90076-0
• [16] L.C. Chang, H.K.D.H. Bhadeshia, Mater. Sci. Technol. 11, 874 (1995), doi: 10.1179/mst.1995.11.9.874
• [17] M.K. Kang, M.X. Zhang, M. Zhu, Acta Mater. 54, 2121 (2006), doi: 10.1016/j.actamat.2005.12.036
• [18] D.A. Porter, K.E. Easterling, Phase Transformations in Metals and Alloys, Vol. 5, Pergamon Press, London 1989, p. 303

Identifiers

DOI

10.12693/APhysPolA.129.40