PL EN


Preferences help
enabled [disable] Abstract
Number of results
2015 | 128 | 5 | 879-882
Article title

Carbon Doped Austenitic Stainless Steel Coatings Obtained by Reactive Magnetron Sputtering

Content
Title variants
Languages of publication
EN
Abstracts
EN
The paper presents the results of investigations of carbon doped austenitic stainless steel coatings (carbon S-phase) obtained by the reactive magnetron sputtering in the reactive atmosphere composed of argon and methane as a carbon source. Stainless steel targets were sputtered under different conditions. During the experiments the argon to methane proportion varied within a range 11/2-7/6. The other parameters such as temperature, pressure, sputtering power, etc. were kept constant. The phase composition was determined using the X-ray diffraction. Electron probe microanalysis (energy dispersive spectroscopy and wavelength dispersive spectroscopy) and glow discharge optical emission spectrometry techniques were used to study element composition of the coatings. Microstructure was investigated by scanning electron microscopy. It was found that varying the methane volume in the reactive atmosphere, it is possible to control the lattice parameter of the carbon S-phase.
Keywords
Contributors
author
  • Institute of Materials Science, West Pomeranian University of Technology, al. Piastów 19, 70-310 Szczecin, Poland
author
  • Institute of Materials Science, West Pomeranian University of Technology, al. Piastów 19, 70-310 Szczecin, Poland
  • Institute of Materials Science, West Pomeranian University of Technology, al. Piastów 19, 70-310 Szczecin, Poland
author
  • Institute of Materials Science, West Pomeranian University of Technology, al. Piastów 19, 70-310 Szczecin, Poland
References
  • [1] Th.L.Christiansen, Th.S.Hummelshoj, M.A.J.Somers, Low temperature thermochemical treatment of stainless steel; bridging from science to technology, Technical University of Denmark, Lyngby http://orbit.dtu.dk/fedora/objects/orbit:63286/datastreams/file_5549776/content
  • [2] J. Baranowska, Def. Diff. Forum 297-301, 297 (2010), doi: 10.4028/www.scientific.net/DDF.297-301.573
  • [3] K.L. Dahm, P.A. Dearlney, Surf. Eng. 12, 61 (1996), doi: 10.1179/sur.1996.12.1.61
  • [4] J. Baranowska, S. Fryska, T. Suszko, Vacuum 50, 160 (2013), doi: 10.1016/j.vacuum.2012.03.054
  • [5] A. Billard, M. Foos, C. Frantz, M. Gantois, Surf. Coat. Technol. 43/44, 521 (1990), doi: 10.1016/0257-8972(90)90103-J
  • [6] T.W. Barbee, B.E. Jacobson, D.L. Keith, Thin Solid Films 63, 143 (1979), doi: 10.1016/0040-6090(79)90115-9
  • [7] S. Malavasi, A. Oueldennaoua, M. Foos, C. Frantz, Mem. Etud. Sci. Rev. Met. 11, 553 (1986)
  • [8] S. Maendl, B. Rauschenbach, Def. Diff. Forum 188-190, 125 (2001), doi: 10.4028/www.scientific.net/DDF.188-190.125
  • [9] S. Malavasi, A. Oueldennaoua, M. Foos, C. Frantz, J. Vac. Sci. Technol. A 5, 1888 (1987), doi: 10.1116/1.574479
  • [10] M.J. Godbole, A.J. Pedraza, J.W. Park, G. Geesey, Scr. Metall. Mater. 28, 1201 (1993), doi: 10.1016/0956-716X(93)90454-Z
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv128n517kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.