PL EN


Preferences help
enabled [disable] Abstract
Number of results
2015 | 128 | 5 | 867-870
Article title

Fabrication and Research of Superhard (Zr-Ti-Cr-Nb)N Coatings

Content
Title variants
Languages of publication
EN
Abstracts
EN
This work presents the results of (Zr-Ti-Cr-Nb)N superhard coatings research. The samples were fabricated by the vacuum-arc deposition method (Arc-PVD). Structure, composition and properties of these coatings were studied. The study of coatings was carried out using scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffraction. Hardness measurements and adhesion tests were performed. The coatings thickness was up to 6.2 μ m, nanocrystallites sizes ranged from 4 to 7.3 nm. Values of hardness and cohesive strength were H=43.7 GPa and L_{C}=62.06 N, respectively. The optimal conditions for coating deposition were found.
Keywords
EN
Contributors
author
  • Sumy State University, R. Korsakova 2, 40007 Sumy, Ukraine
author
  • Sumy State University, R. Korsakova 2, 40007 Sumy, Ukraine
  • Sumy State University, R. Korsakova 2, 40007 Sumy, Ukraine
author
  • Sumy State University, R. Korsakova 2, 40007 Sumy, Ukraine
author
  • National Technical University "Kharkiv Polytechnic Institute", Kharkiv, Ukraine
author
  • Kharkiv National University, Kharkiv, Ukraine
author
  • South-West State University, Kursk, Russian Federation
author
  • Department of Electrical Devices and High Voltage Technology, Lublin University of Technology, Lublin, Poland
References
  • [1] H.E. Cheng, W.J. Lee, M. Hsu, Thin Solid Films 485, 59 (2005), doi: 10.1016/j.tsf.2005.03.049
  • [2] J.L. Ruan, D.F. Lii, J.S. Chen, J.-L. Huang, Ceram. Int. 35, 1999 (2009), doi: 10.1016/j.ceramint.2008.11.002
  • [3] S.H. Shin, M.W. Kim, M.C. Kang, H.K. Kim, D.H. Kwon, J.S. Kim, Surf. Coat. Technol. 202, 5613 (2008), doi: 10.1016/j.surfcoat.2008.06.128
  • [4] A.D. Pogrebnjak, A.G. Ponomarev, A.P. Shpak, Phys. Usp. 55, 270 (2012), doi: 10.3367/UFNe.0182.201203d.0287
  • [5] A.D. Pogrebnjak, V.M. Beresnev, Nanocoatings, Nanosystems, Nanotechnologies, IL: Bentham Sci. Publ., Oak Park 2012, p. 147, doi: 10.2174/97816080541691120101
  • [6] A.D. Pogrebnjak, V.M. Beresnev, A.A. Demianenko, Phys. Solid State 54, 1882 (2012), doi: 10.1134/S1063783412090247
  • [7] C.S. Sandu, R. Sanjinés, M. Benkahoul, F. Medjani, F. Lévy, Surf. Coat. Technol. 201, 4083 (2006), doi: 10.1016/j.surfcoat.2006.08.100
  • [8] V.C. Kamlesh, K. Rawal, Procedia Technol. 14, 430 (2014), doi: 10.1016/j.protcy.2014.08.055
  • [9] R. Krause-Rehberg, A.D. Pogrebnyak, V.N. Borisyuk, M.V. Kaverin, A.G. Ponomarev, M.A. Bilokur, K. Oyoshi, Y. Takeda, V.M. Beresnev, O.V. Sobol', Phys. Met. Metallogr. 114, 672 (2013), doi: 10.1134/S0031918X13080061
  • [10] V. Ivashchenko, S. Veprek, A. Pogrebnjak, B. Postolnyi, Sci. Technol. Adv. Mater. 15, 025007 (2014), doi: 10.1088/1468-6996/15/2/025007
  • [11] S. Veprek, M.J.G. Veprek-Heijman, Surf. Coat. Technol. 202, 5063 (2008), doi: 10.1016/j.surfcoat.2008.05.038
  • [12] N. Jiang, Y.G. Shen, H.J. Zhang, S.N. Bao, X.Y. Hou, Mater. Sci. Eng. B 135, 1 (2006), doi: 10.1016/j.mseb.2006.06.043
  • [13] A.D. Pogrebnjak, V.M. Beresnev, O.V. Bondar, G. Abadias, P. Chartier, B.A. Postol'nyi, A.A. Andreev, O.V. Sobol', Tech. Phys. Lett. 40, 215 (2014), doi: 10.1134/S1063785014030092
  • [14] A.D. Pogrebnjak, A.P. Shpak, N.A. Azarenkov, V.M. Beresnev, Phys. Usp. 52, 29 (2009), doi: 10.3367/UFNe.0179.200901b.0035
  • [15] R.L. Boxman, V.N. Zhitomirsky, Rev. Sci. Instrum. 77, 021101 (2006), doi: 10.1063/1.2169539
  • [16] A.D. Pogrebnjak, S. Bratushka, V.I. Boyko, I.V. Shamaninb, Yu.V. Tsvintarnaya, Nucl. Instrum. Methods 145, 373 (1998), doi: 10.1016/S0168-583X(98)00417-0
  • [17] A.D. Pogrebnjak, Yu.A. Kravchenko, S.B. Kislitsyn, Sh.M. Ruzimov, F. Noli, P. Misaelides, A. Hatzidimitriou, Surf. Coat. Technol. 201, 2621 (2006), doi: 10.1016/j.surfcoat.2006.05.018
  • [18] A.D. Pogrebnjak, A.D. Mikhaliov, N.A. Pogrebnjak, Yu.V. Tsvintarnaya, V.I. Lavrentiev, M. Iljashenko, A.N. Valyaev, S. Bratushka, A. Zecca, R. Sandrik, Phys. Lett. 241, 357 (1998), doi: 10.1016/S0375-9601(98)00131-5
  • [19] H.W. Holleck, Surf. Coat. Technol. 36, 151 (1988), doi: 10.1016/0257-8972(88)90145-4
  • [20] G. Abadias, Surf. Coat. Technol. 202, 2223 (2008), doi: 10.1016/j.surfcoat.2007.08.029
  • [21] I. Patrov, L. Hultman, J.E. Sundgen, J.E. Greene, J. Vac. Sci. Technol. A10, 265 (1992), doi: 10.1116/1.578074
  • [22] D. Gall, S. Kodambaka, M.A. Wall, I. Petrov, J.E. Greene, J. Appl. Phys. 93, 9086 (2003), doi: 10.1063/1.1567797
  • [23] M.K. Kazmanli, M. Urgen, A.F. Cakir, Surf. Coat. Technol. 167, 77 (2003), doi: 10.1016/S0257-8972(02)00866-6
  • [24] A.D. Pogrebnjak, A.V. Pshyk, V.M. Beresnev, B.R. Zhollybekov, J. Frict. Wear 35, 55 (2014), doi: 10.3103/S1068366614010073
  • [25] A.D. Pogrebnjak, A.G. Lebed, Yu.F. Ivanov, Vacuum 63, 483 (2001), doi: 10.1016/S0042-207X(01)00225-1
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv128n514kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.