PL EN


Preferences help
enabled [disable] Abstract
Number of results
2015 | 128 | 5 | 841-844
Article title

Long-Range Effect in Ion-Implanted Titanium Alloys

Content
Title variants
Languages of publication
EN
Abstracts
EN
Surface modification of titanium alloy (Ti6Al4V) by nitrogen ion implantation and ion beam-assisted deposition (C, N) was investigated. The depth distribution of implanted nitrogen atoms was analysed using the Rutherford backscattering technique. Nitrogen implantation reduces the coefficient of friction and wear. A better effect can be obtained when nitrogen implantation is combined with carbon deposition. Based on the changes in the coefficients of friction and wear as well as profilograms of wear tracks, the improvement of the tribological properties was found at a depth exceeding nearly 5 times the range of the implanted nitrogen ions. Identification of the long-range effect for Ti6Al4V alloy was performed on the basis of tribological analyses. This study is a continuation of research conducted for AISI 316L and H11 steel.
Keywords
Contributors
author
  • Faculty of Mechanical Engineering, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland
author
  • Faculty of Mathematics, Physics and Computer Science, Maria Curie-Skłodowska University, pl. M. Curie-Skłodowskiej 1, 20-031 Lublin, Poland
References
  • [1] Yu.P. Sherkeev, S.A. Gashenko, O.V. Pashchenko, V.P. Krivobokov, Surf. Coat. Technol. 91, 20 (1997), doi: 10.1016/S0257-8972(96)03129-5
  • [2] D.I. Tetelbaum, E.V. Kurilchik, N.D. Latisheva, Nucl. Instrum. Methods Phys. Res. B 127/128, 153 (1997), doi: 10.1016/S0168-583X(96)01113-5
  • [3] Yu.P. Sharkeev, E.V. Kozlov, Surf. Coat. Technol. 219, 158 (2002), doi: 10.1016/S0257-8972(02)00212-8
  • [4] A.C. Fischer-Cripps, Vacuum 58, 569 (2000), doi: 10.1016/S0042-207X(00)00377-8
  • [5] P. Budzynski, Nucl. Instrum. Methods Phys. Res. B 342, 1 (2015), doi: 10.1016/j.nimb.2014.09.004
  • [6] P. Budzynski, L. Kara, T. Küçükömeroğlu, M. Kaminski, Vacuum 122, 230 (2015), doi: 10.1016/j.vacuum.2015.10.002
  • [7] P. Budzynski, A.A. Youssef, J. Sielanko, Wear 261, 1271 (2006), doi: 10.1016/j.vacuum.2015.10.002
  • [8] A.A. Youssef, P. Budzynski, J. Filiks, A.P. Kobzev, J. Sielanko, Vacuum 77, 37 (2004), doi: 10.1016/j.vacuum.2004.07.069
  • [9] P. Budzynski, P. Tarkowski, P. Pekala, Vacuum 63, 731 (2002), doi: 10.1016/S0042-207X(01)00266-4
  • [10] P. Budzynski, A.A. Youssef, B. Kamienska, Vacuum 70, 417 (2003), doi: 10.1016/S0042-207X(02)00680-2
  • [11] J.F. Ziegler, Nucl. Instrum. Methods Phys. Res. B 219, 1027 (2004); http://www.srim.org, doi: 10.1016/j.nimb.2004.01.208
  • [12] J. Piekoszewski, B. Sartowska, J. Walis, Z. Werner, M. Kopcewicz, F. Prokert, J. Stanisławski, J. Kalinowska, W. Szymczyk, Nukleonika 49, 57 (2004)
  • [13] J. Sielanko, W. Szyszko, Nucl. Instrum. Methods Phys. Res. B 16, 340 (1986), doi: 10.1016/0168-583X(86)90093-5
  • [14] J. Sielanko, M. Smolira, Annales UMCS Informatica AI 1, 221 (2003)
  • [15] W.D. Wilson, L.G. Haggmark, J.P. Biersack, Phys. Rev. B 15, 2458 (1977), doi: 10.1103/PhysRevB.15.2458
  • [16] O.S. Oen, M.T. Robinson, Nucl. Instrum. Methods 132, 647 (1976), doi: 10.1016/0029-554X(76)90806-5
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv128n507kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.