Acoustic Emission During Firing of the Illite-Based Ceramics with Fly Ash Addition

• Authors: M. Knapek , T. Húlan , P. Dobroň , F. Chmelík , A. Trník , I. Štubňa
• Languages of publication: EN

Abstracts

EN

In this work, illite-based ceramic body with power plant fly ash addition (60 wt.% of illite, 30 wt.% of fly ash and 10 wt.% of illite fired at 1100°C) was investigated by the thermal analysis techniques (differential thermal analysis, thermodilatometry and thermogravimetry) and the acoustic emission technique. The green body was heated up to 1100°C at three different rates 2.5, 5, 10 K/min. The most intense acoustic emission was recorded at the highest rate 10 K/min. Mutual correlations between thermal analyses and acoustic emission data were also examined. The first acoustic emission response appears at 430°C, corresponding to a small endotherm on the DTA curve, where the thermal decomposition of mineral portlandite takes place. In the temperature range from 600 to 900°C, high acoustic emission activity correlates with dehydroxylation and expansion of the sample. At temperatures higher than 800°C, the source of acoustic emission signals is the thermal decomposition of calcite. The amorphous phase created from illite at 920°C becomes pyroplastic, therefore it is not documented by the acoustic emission technique.

Keywords

EN

64.70.ph; 61.43.Fs; 65.60.+a; 81.70.Pg; 43.40.Le

Discipline

• 64.70.ph: Nonmetallic glasses (silicates, oxides, selenides, etc.)
• 61.43.Fs: Glasses
• 65.60.+a: Thermal properties of amorphous solids and glasses: heat capacity, thermal expansion, etc.
• 81.70.Pg: Thermal analysis, differential thermal analysis (DTA), differential thermogravimetric analysis

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2015
• Volume: 128
• Issue: 4
• Pages: 783-786

Dates

published

2015-10

Contributors

author

M. Knapek

• Dept. of Physics of Materials, Charles University in Prague, Ke Karlovu 5, 121 16 Prague, Czech Republic

author

T. Húlan

• Dept. of Physics, Constantine the Philosopher University in Nitra, Tr. A. Hlinku 1, 949 74 Nitra, Slovakia

author

P. Dobroň

• Dept. of Physics of Materials, Charles University in Prague, Ke Karlovu 5, 121 16 Prague, Czech Republic

author

F. Chmelík

• Dept. of Physics of Materials, Charles University in Prague, Ke Karlovu 5, 121 16 Prague, Czech Republic

author

A. Trník

• Dept. of Physics, Constantine the Philosopher University in Nitra, Tr. A. Hlinku 1, 949 74 Nitra, Slovakia

author

I. Štubňa

• Dept. of Physics, Constantine the Philosopher University in Nitra, Tr. A. Hlinku 1, 949 74 Nitra, Slovakia

References

• [1] I. Queralt, X. Querol, A. López-Soler, F. Plana, Fuel 76, 787 (1997), doi: 10.1016/S0016-2361(97)00024-0
• [2] A. Olgun, Y. Erdogan, Y. Ayhan, B. Zeybek, Ceram. Int. 31, 153 (2005), doi: 10.1016/j.ceramint.2004.04.007
• [3] R. Sokolář, L. Smetanová, Ceram. Int. 36, 215 (2010), doi: 10.1016/j.ceramint.2009.07.009
• [4] R. Sokolář, L. Vodová, Ceram. Int. 37, 2879 (2011)
• [5] Z. Pospíšil, A. Koller, Fine Ceramics, Basics of Technology, SNTL/ALFA, Prague 1981 (in Czech)
• [6] J. Hlaváč, Fundamentals of Silicates Technology, SNTL/ALFA, Prague 1981 (in Czech)
• [7] V. Hanykýř, J. Kutzendorfer, Technology of Ceramics, Silis Praha and Vega Hradec Králové, Prague 2000 (in Czech)
• [8] I. Štubňa, F. Chmelík, A. Trník, P. Šín, Ceram. Int. 38, 6919 (2012), doi: 10.1016/j.ceramint.2012.05.021
• [9] F. Chmelík, A. Trník, J. Pešička, I. Štubňa, J. Eur. Ceram. Soc. 31, 2205 (2011), doi: 10.1016/j.jeurceramsoc.2011.05.045
• [10] R. Podoba, A. Trník, ź. Podobník, Epitönyag 64, 28 (2012)
• [11] I. Štubňa, A. Vážanová, G. Varga, D. Hrubý, in: Proc. Research and Teaching of Physics on the Context of University Education, SPU Nitra 2007, p. 59

Identifiers

DOI

10.12693/APhysPolA.128.783