PL EN


Preferences help
enabled [disable] Abstract
Number of results
2015 | 128 | 4 | 775-778
Article title

The Study of the Behavior of Constrained Groove Pressed Magnesium Alloy after Heat Treatment

Content
Title variants
Languages of publication
EN
Abstracts
EN
In this work twin-roll cast AZ31 magnesium strip of thickness 5.6 mm was subjected to the heat treatment and further constrained groove pressing. A comparison of the microstructure and microhardness of as-cast, constrained groove pressed and annealed material was carried out. The twin-roll cast strip exhibits an inhomogeneous structure which is replaced by a finer and uniform recrystallized one after aging at 450°C for 10 h. A significant increase of the microhardness was observed accompanied by a pronounce grain refinement. Nevertheless, the distribution of the grain size is unequal along the specimen width. Thermal stability of the deformed structure during subsequent annealing was investigated. It was shown that higher annealing temperatures result in a formation of a more uniform recrystallized structure and in a significant drop of microhardness down to the values obtained for as-cast alloy.
Keywords
Contributors
author
  • Charles University in Prague, Faculty of Mathematics and Physics, Ke Karlovu 5, 12116, Prague, Czech Republic
author
  • Magnesium Innovation Centre (MagIC) Helmholz Zentrum Geesthacht, Max-Planck Str. 1, D21502 Geesthacht, Germany
author
  • Magnesium Innovation Centre (MagIC) Helmholz Zentrum Geesthacht, Max-Planck Str. 1, D21502 Geesthacht, Germany
author
  • Magnesium Innovation Centre (MagIC) Helmholz Zentrum Geesthacht, Max-Planck Str. 1, D21502 Geesthacht, Germany
author
  • Charles University in Prague, Faculty of Mathematics and Physics, Ke Karlovu 5, 12116, Prague, Czech Republic
author
  • Charles University in Prague, Faculty of Mathematics and Physics, Ke Karlovu 5, 12116, Prague, Czech Republic
author
  • COMTES FHT a.s., Průmyslová 995, Dobřany 334 41, Czech Republic
author
  • Charles University in Prague, Faculty of Mathematics and Physics, Ke Karlovu 5, 12116, Prague, Czech Republic
References
  • [1] S. Schumann, H.E. Friedrich, S. Durrani, Mater. Sci. Forum 419-422, 51 (2003), doi: 10.4271/930411
  • [2] A.A. Luo, A. Luo, T. Shinoda, R.P. Osborne, N. Weaver, Mater. Sci. Forum 419-422, 67 (2003), doi: 10.1533/9781845692032.2.67
  • [3] M. Avedesian, H. Baker, ASM Specialty Handbook: Magnesium and Magnesium Alloys, ASM International, New York 1999
  • [4] H. Zhao, Z. Zhou, X. Liu, S. Guan, J. Cent. South Univ. Technol. 15, 459 (2008), doi: 10.1007/s11771-008-0086-8
  • [5] Z. Shen, A. Ma, J. Jiang, D. Song, F. Lu, M. Noda, K. Funami, Procedia Eng. 27, 475(2012), doi: 10.4028/0-87849-985-7.475
  • [6] G. Kurz, J. Bohlen, L. Stutz, D. Letzig, K.U. Kainer, Mater. Sci. Forum 765, 205 (2013), doi: 10.4028/www.scientific.net/msf.765.205
  • [7] D.H. Shin, J.J. Park, Y.S. Kim, K.T. Park, J. Mater. Sci. Eng. A 328, 98 (2002), doi: 10.1016/s0921-5093(01)01665-3
  • [8] M. Shantharaja, J. Mater. Sci. Eng. 2, 1 (2013), doi: 10.4172/2169-0022.1000124
  • [9] P.G. Patridge, Metall. Rev. 12, 169 (1967), doi: 10.1179/imr.1967.12.1.169
  • [10] M. Zimina, P. Málek, J. Bohlen, D. Letzig, G. Kurz, M. Cieslar, in: Proc. Int. Conf. Mater. Heat Treat., Czech Republic, 2013, p. 218
  • [11] M. Zimina, J. Bohlen, D. Letzig, G. Kurz, M. Cieslar, J. Zník, IOP Conf. Ser. Mater. Sci. Eng. 63, 012078 (2014), doi: 10.1088/1757-899X/63/1/012078
  • [12] M.S. Ghazani, A. Vajd, Model. Simul. Mater. Sci. Eng. 4, 32 (2014), doi: 10.4236/mnsms.2014.41006
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv128n474kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.