PL EN


Preferences help
enabled [disable] Abstract
Number of results
2015 | 128 | 4 | 758-761
Article title

Neutron Diffraction Study and Deformation Behavior of a Composite Based Mg Alloy Reinforced by Short Saffil Fibers

Content
Title variants
Languages of publication
EN
Abstracts
EN
In the present work neutron diffraction has been applied for ex situ investigation of residual stresses in Mg-4%Al-1%Ca (AX41) magnesium alloy reinforced with short Saffil fibers. Samples were deformed in compression at room temperature. Two types of fiber arrangement were investigated. In both samples the fibers were homogeneously distributed and arranged in parallel planes with a random fiber orientation. In the first sample these planes were parallel with the loading axis and in the second one they were perpendicular to the loading direction. Significant dependence of both the mechanical properties and residual strains on the fibers orientation was observed. Sample with parallel fiber arrangement showed higher hardness and lower ductility. Further the increment of residual tensile lattice strain in the matrix with a macroscopic deformation is much higher than in the other case. It was found that the residual strain evolution strongly depends on the orientation of grains in the matrix.
Keywords
EN
Contributors
author
  • Charles University in Prague, Department of Physics of Material, Ke Karlovu 5, CZ-12116 Prague, Czech Republic
author
  • Charles University in Prague, Department of Physics of Material, Ke Karlovu 5, CZ-12116 Prague, Czech Republic
author
  • Academy of Sciences of the Czech Republic, Institute of Nuclear Physic, Rez, Czech Republic
References
  • [1] H. Ferkel, B.L. Mordike, Mater. Sci. Eng. A 298, 193 (2001), doi: 10.1016/S0921-5093(00)01283-1
  • [2] K.B. Nie, X.J. Wang, X.S. Hu, L. Xu, K. Wu, M.Y. Zheng, Mater. Sci. Eng. A 528, 5278 (2011), doi: 10.1016/j.msea.2011.03.061
  • [3] Z. Trojanova, V. Gartnerova, A. Jager, A. Namesny, M. Chalupova, P. Palcek, P. Lukac, Compos. Sci. Technol. 69, 2256 (2009), doi: 10.1016/j.compscitech.2009.06.016
  • [4] R. Mises, Z. Angew. Math. Mech. 8, 161 (1928), doi: 10.1002/zamm.19280080302
  • [5] M. Knezevic, A. Levinson, R. Harris, R.K. Mishra, R.D. Doherty, S.R. Kalidindi, Acta Mater. 58, 6230 (2010), doi: 10.1016/j.actamat.2010.07.041
  • [6] M.R. Daymond, C. Lund, M.A.M. Bourke, D.C. Dunand, Metall. Mater. Trans. A 30, 2989 (1999)
  • [7] Z. Trojanova, Z. Szaraz, F. Chmelik, P. Lukac, Mater. Sci. Eng. A 528, 2479 (2011), doi: 10.1016/j.msea.2010.11.058
  • [8] Z. Trojanova, Z. Szaraz, J. Labar, P. Lukac, J. Mater. Process. Technol. 162-163, 131 (2005), doi: 10.1016/j.jmatprotec.2005.02.188
  • [9] M. Taya, R.J. Arsenault, Scr. Metall. 21, 349 (1987)
  • [10] Z. Trojanova, K. Mathis, P. Lukac, M. Janecek, G. Farkas, Metall. Mater. Trans. A 45(1), 29 (2014), doi: 10.1007/s11661-013-2120-1
  • [11] S.-H. Ryu, J.-H. Park, C.S. Lee, S.-H. Ahn, S.-T. Oh, Mater. Trans. 50, 1553 (2009), doi: 10.2320/matertrans.M2009028
  • [12] M.T. Hutchings, P.J. Withers, T.M. Holden, T. Lorentzen, in: Comprehensive Materials Processing, Eds. T.R. Watkins, G.S. Schajer, M.J. Lance, Taylor & Francis, Boca Raton 2012, doi: 10.1016/B978-0-08-096532-1.00109-6
  • [13] G. Farkas, K. Máthis, P. Lukáš, J. Pilch, M. Vrána, M. Janeček, Z. Trojanová, Mater. Sci. Forum 777, 92 (2014), doi: 10.4028/www.scientific.net/MSF.777.92
  • [14] G. Garces, G. Bruno, Compos. Sci. Technol. 66, 2664 (2006), doi: 10.1016/j.compscitech.2006.03.019
  • [15] P. Van Houtte, L. De Buyser, Acta Metall. Mater. 41, 323 (1993), doi: 10.1016/0956-7151(93)90063-X
  • [16] S.R. Agnew, D.W. Brown, C.N. Tomé, Acta Mater. 54, 4841 (2006), doi: 10.1016/j.actamat.2006.06.020
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv128n469kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.