3D Discrete Dislocation Dynamics: Influence of Segment Mobility on Critical Shear Stress

• Authors: T. Záležák , A. Dlouhý
• Languages of publication: EN

Abstracts

EN

We use 3D discrete dislocation dynamics technique to study a low-angle tilt boundary migration subjected to applied shear stress at high temperatures, where diffusion significantly contributes to the dislocation motion. The model considers Peach-Koehler forces due to interactions between individual straight dislocation segments. The model also addresses dislocation plasticity in a field of impenetrable incoherent spherical precipitates. Velocities of the individual dislocation segments are calculated in relation to the crystallography of the material. Several calculation series have been carried out for different velocity and driving force relations. The results show that there exists a critical applied shear stress, below which the low angle dislocation boundary cannot surpass the rigid precipitates and remains in an equilibrium configuration. This agrees with experimental results obtained in creep tests of dispersion strengthened alloys. The critical stresses have been calculated also for situations where the applied stress was decreased during the interaction between the low-angle tilt boundary and the precipitates.

Keywords

EN

61.72.Hh; 61.72.Lk; 62.20.Hg

Discipline

• 62.20.Hg: Creep
• 61.72.Lk: Linear defects: dislocations, disclinations
• 61.72.Hh: Indirect evidence of dislocations and other defects (resistivity, slip, creep, strains, internal friction, EPR, NMR, etc.)

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2015
• Volume: 128
• Issue: 4
• Pages: 654-656

Dates

published

2015-10

Contributors

author

T. Záležák

• Institute of Physics of Materials, Academy of Sciences (CEITEC IPM), Ži v zkova 22, 616 62 Brno, Czech Republic

author

A. Dlouhý

• Institute of Physics of Materials, Academy of Sciences (CEITEC IPM), Ži v zkova 22, 616 62 Brno, Czech Republic

References

• [1] D. Mordehai, E. Clouet, M. Fivel, M. Verdier, Philos. Mag. 88, 899 (2008), doi: 10.1080/14786430801992850
• [2] J. Čadek, Creep in Metallic Materials, Elsevier, Amsterdam 1988
• [3] P. Hirth, J. Lothe, Theory of Dislocations, 2nd ed., Krieger Publ., Malabar 1992
• [4] D. Holec, A. Dlouhý, Zeitschrift f. Metalkde 96, 558 (2005)
• [5] T. Záležak, A. Dlouhý, Acta Phys. Pol. A 122, 450 (2012) http://przyrbwn.icm.edu.pl/APP/PDF/122/a122z3p06.pdf
• [6] T. Záležak, A. Dlouhý, Key Eng. Mater. 592, 87 (2014), doi: 10.4028/www.scientific.net/KEM.592-593.87
• [7] J.H. Hausselt, W.D. Nix, Acta Metall. 25, 595 (1977), doi: 10.1016/0001-6160(77)90001-3
• [8] W. Blum, in: Materials Science and Technology, Vol. 6, Ed. H. Mughrabi, VCH Verlagsgesellschaft, Weinheim 1993

Identifiers

DOI

10.12693/APhysPolA.128.654