A Study on Hardfacing Alloy Using Fe-Cr and Fe-B Powders

• Authors: E. Karip , S. Aydin , M. Muratoğlu
• Languages of publication: EN

Abstracts

EN

The aim of this study is the investigation of the effect of ferroboron and ferrochromium with massive wire based hardfacing alloys. Mixture of Fe-Cr and Fe-B powders was added to massive wire during welding process. Hardface layers were obtained by three different powder mixture and three different powder/massive wire proportions. Hardfacing was applied to two AISI 1020 steel substrates by open arc welding. Hardness test, scanning electron microscope and X-ray diffraction analysis were made to the samples. Test results showed that increasing ferroboron content and increasing powder mixture amount enhanced the microhardness of the specimens.

Keywords

EN

81.20.Vj

Discipline

• 81.20.Vj: Joining; welding

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2015
• Volume: 128
• Issue: 2B
• Pages: B-160-B-163

Dates

published

2015-8

Contributors

author

E. Karip

• Firat University, Metallurgy and Materials Engineering, Elazig, Turkey

author

S. Aydin

• Firat University, Metallurgy and Materials Engineering, Elazig, Turkey

author

M. Muratoğlu

• Firat University, Metallurgy and Materials Engineering, Elazig, Turkey

References

• [1] R. Davis, ASM Handbook, Welding, Brazing and Soldering, Vol. 6, ASM International, USA 1993, p. 787
• [2] I. Khan, Welding Science and Technology, 1st ed., New Age International (P), New Delhi 2007
• [3] S.Y. Tu, M.D. Jean, J.T. Wang, C.S. Wu, Int. J. Adv. Manuf. Technol. 27, 889 (2006), doi: 10.1007/s00170-004-2265-6
• [4] H. Deng, H. Shi, S. Tsuruoka, Surf. Coat. Technol. 204, 3927 (2010), doi: 10.1016/j.surfcoat.2010.05.013
• [5] M. Shamanian, S.M.R. Mousavi Abarghouie, S.R. Mousavi Pour, Mater. Des. 31, 2760 (2010), doi: 10.1016/j.matdes.2010.01.017
• [6] M. Kirchgabner, E. Badisch, F. Franek, Wear 265, 772 (2008), doi: 10.1016/j.wear.2008.01.004
• [7] G. Azimi, M. Shamanian, J. Mater. Sci. 45, 842 (2010), doi: 10.1007/s10853-009-4008-4
• [8] E. Badich, C. Katsich, H. Winkelmann, F. Franek, M. Roy, Tribol. Int. 43, 1234 (2010), doi: 10.1016/j.triboint.2010.01.008
• [9] J.J. Coronado, H.F. Caicedo, A.L. Gomez, Tribol. Int. 42, 745 (2009), doi: 10.1016/j.triboint.2008.10.012
• [10] L. Lin, K. Han, Surf. Coat. Technol. 106, 100 (1998)
• [11] B. Selcuk, R. İpek, M.B. Karamis, J. Kuzucu, J. Mater. Proc. Technol. 103, 310 (2000)
• [12] J.W. Yoo, S.H. Lee, C.S. Yoon, S.J. Kim, J. Nucl. Mater. 352, 90 (2006), doi: 10.1016/j.jnucmat.2006.02.071
• [13] J.H. Kim, H.S. Hong, S.J. Kim, Mater. Lett. 61, 1235 (2007), doi: 10.1016/j.matlet.2006.07.015
• [14] R.J. Chung, X. Tang, D.Y. Li, B. Hinckley, K. Dolman, Wear 301, 695 (2013), doi: 10.1016/j.wear.2013.01.079
• [15] M.H. Amushahi, F. Ashrafizadeh, M. Shamanian, Surf. Coat. Technol. 204, 2723 (2012), doi: 10.1016/j.surfcoat.2010.02.028
• [16] S.T. Petrovic, S.V. Markovic, S. Zec, J. Serb. Chem. Soc. 67, 697 (2002), doi: 10.2298/JSC0210697T
• [17] M. Eroğlu, Surf. Coat. Technol. 203, 2229 (2009), doi: 10.1016/j.surfcoat.2009.02.010
• [18] P.K. Liao, K.E. Spear, ASM Handbook, Alloy Phase Diagrams, Vol. 3, ASM International, Materials Park, OH 1992, p. 81
• [19] H. Okamoto, in Ref. [18], p. 110
• [20] X.H. Tang, R. Chung, C.J. Pang, D.Y. Li, B. Hinckley, K. Dolman, Wear 271, 1426 (2011), doi: 10.1016/j.wear.2010.11.047
• [21] C.M. Lin, H.H. Lai, J.C. Kuo, W. Wu, Mater. Charact. 62, 1124 (2011), doi: 10.1016/j.matchar.2011.09.007

Identifiers

DOI

10.12693/APhysPolA.128.B-160