Influence of Parameters on Tribological Behaviour of E-Glass Fiber Reinforced Epoxy Composites

• Authors: N. Ozsoy , M. Ozsoy , A. Mimaroglu
• Languages of publication: EN

Abstracts

EN

E-glass fiber reinforced epoxy composites were fabricated by hand lay up method and tested for investigating tribological behaviours. Wear behaviours of composites 0°, 90° and [0°/90°] oriented were investigated by pin on disc wear tester device for a constant distance (1000 m) and the design of experiments approach using the Taguchi method was employed. The tests were conducted sliding against a steel disc (60 HRC) under different sliding and loading conditions. Signal to noise ratio and analysis of variance (ANOVA) were used to investigate the influence of parameters on the wear rate and coefficient of friction.

Keywords

EN

81.05.Qk; 07.05.Fb; 62.20.Qp

Discipline

• 62.20.Qp: Friction, tribology, and hardness(see also 46.55.+d Tribology and mechanical contacts in continuum mechanics of solids; for materials treatment effects on friction related properties, see 81.40.Pq)
• 07.05.Fb: Design of experiments
• 81.05.Qk: Reinforced polymers and polymer-based composites

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2015
• Volume: 128
• Issue: 2B
• Pages: B-55-B-58

Dates

published

2015-8

Contributors

author

N. Ozsoy

• Sakarya University, Mechanical Engineering Department, Sakarya, Turkey

author

M. Ozsoy

• Sakarya University, Mechanical Engineering Department, Sakarya, Turkey

author

A. Mimaroglu

• Sakarya University, Mechanical Engineering Department, Sakarya, Turkey

References

• [1] H. Pıhtılı, Europ. Polym. J. 45, 149 (2009), doi: 10.1016/j.eurpolymj.2008.10.006
• [2] B.F. Yousif, N.S.M. El-Tayeb, Tribol. Int. 43, 2365 (2010), doi: 10.1016/j.triboint.2010.08.010
• [3] T. Larsen, L.T. Andersen, B. Thorning, A. Horsewell, M. Vigild, Wear 262, 1013 (2007), doi: 10.1016/j.wear.2006.10.004
• [4] B. Suresha, G. Chandramohan Siddaramaiah, P. Samapthkumaran, S. Seetharamu, Mater. Sci. Eng. A 443, 285 (2007), doi: 10.1016/j.msea.2006.09.016
• [5] S. Basavarajappa, S. Ellangovan, Wear 296, 491 (2012), doi: 10.1016/j.wear.2012.08.001
• [6] S. Biswas, A. Satapathy, Mater. Des. 31, 1752 (2010), doi: 10.1016/j.matdes.2009.11.021
• [7] K. Gupta Siddhartha, Mater. Des. 35, 467 (2012), doi: 10.1016/j.matdes.2011.09.010
• [8] A.Kr. Mishra, R. Sheokand, R.K. Srivastava, Int. J. Sci. Res. Publ. 2, (2012)
• [9] S. Venkat Prasat, R. Subramanian, N. Radhika, B. Anandavel, L. Arun, N. Praveen, Europ. J. Sci. Res. 53, 280 (2011)
• [10] T.R. Hemanth Kumar, R.P. Swamy, T.K. Chandrashekar, J. Miner. Mater. Character. Eng. 10, 1179 (2011), doi: 10.4236/jmmce.2011.1012090
• [11] G. Taguchi, Taguchi on Robust Technology Development: Bringing Quality Engineering Upstream, ASME Press, New York 1993
• [12] ASTM G99-95 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
• [13] C. Soutis, Mater. Sci. Eng. A 412, 171 (2005), doi: 10.1016/j.msea.2005.08.064
• [14] K. Palanikumar, 10.1007/s00170-006-0811-0HUKHUKInt. J. Adv. Manufact. Technol. 36, 19 (2008)

Identifiers

DOI

10.12693/APhysPolA.128.B-55