PL EN


Preferences help
enabled [disable] Abstract
Number of results
2015 | 127 | 4 | 1421-1423
Article title

Anisotropic Magnetic Properties of MilledBearing Steel Surface

Content
Title variants
Languages of publication
EN
Abstracts
EN
For many reasons, the steel surfaces are machined to obtain required physical properties. Suitable methods are required for the management and control of the manufacturing processes, which are simultaneously sufficiently robust and sensitive. The non-destructive testing methods, sensitive to the magnetic properties of the surface, are very suitable for this purpose. The Barkhausen noise (BN) measurement, which reveals the discontinuous movement of the magnetic domains in the thin surface layer during magnetisation reversal process is very robust, while magneto-optical Kerr effect (MOKE) method, using polarized light for orientation measurements of magnetic domains at the surface, is very sensitive and provides detailed information about hysteresis curves (HC) of the materials. In this contribution our results obtained on the milled 100Cr6 bearing steel are presented. These properties were obtained by MOKE laboratory measurements and bring very interesting facts about the magnetisation reversal process, which depends on the orientation of the magnetic field with respect to the cutting direction. Our results clarify the strong anisotropy of BN, which is observed during the industrial application of this method.
Keywords
EN
Contributors
author
  • Research Centre, University of Žilina, Univerzitná 1, 010 26 Žilina, Slovak Republic
  • Nanotechnology Centre, VŠB - Technical University of Ostrava, 17. listopadu 15, 708 33 Ostrava - Poruba, Czech Republic
author
  • Nanotechnology Centre, VŠB - Technical University of Ostrava, 17. listopadu 15, 708 33 Ostrava - Poruba, Czech Republic
author
  • Research Centre, University of Žilina, Univerzitná 1, 010 26 Žilina, Slovak Republic
  • Faculty of Mechanical Engineering, University of Zilina, Univerzitná 8215/1, 010 26 Žilina, Slovak Republic
author
  • Nanotechnology Centre, VŠB - Technical University of Ostrava, 17. listopadu 15, 708 33 Ostrava - Poruba, Czech Republic
author
  • Faculty of Mechanical Engineering, University of Zilina, Univerzitná 8215/1, 010 26 Žilina, Slovak Republic
References
  • [1] V. Moorthy, B.A. Shaw, K. Brimble, I. Atkins, 3rd International Conference on Barkhausen noise and micromagnetic testing, Tampere, Finland, 2001
  • [2] J. Kameda, R. Ranjan, Acta Metall. 35(7), 1527 (1987), doi: 10.1016/0001-6160(87)90097-6
  • [3] C Gatelier-Rothea, J Chicois, R Fougeres, P Fleischmann, Acta Mater. 46(14), 4873 (1998), doi: 10.1016/S1359-6454(98)00205-5
  • [4] J. Paa, J. Bydžovský, Measurement 46, 866 (2013), doi: 10.1016/j.measurement.2012.10.014
  • [5] Z.Q. Qiu, S.D. Bader, Rev. Sci. Instrum. 71, 1243 (2000), doi: 10.1063/1.1150496
  • [6] J. Wang, C. Liu, K. Wang, CIRP Annals 48(1), 53 (1999), doi: 10.1016/S0007-8506(07)63130-8
  • [7] M. Neslušan, M. Šípek, J. Mrázik, Material Engineering - Materiálové Inžinierstvo (MEMI) 19, 1 (2012)
  • [8] K. Postava, H. Jaffres, A. Schuhl, F.N.V. Dau, M. Goiran, A. Fert, J. Magn. Magn. Mater. 172, 199 (1997), doi: 10.1016/S0304-8853(97)00098-X
  • [9] Q. Zhan, S. Vandezande, K. Temst, Ch.V. Haesendonck, Phys. Rev. B 80, 094416 (2009), doi: 10.1103/PhysRevB.80.094416
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv127n4153kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.