Spark Plasma Sintering of Boron Carbide Ceramics Using Metallic Silicon in Square Cross Section

• Authors: M. Cengiz , F. Sahin
• Languages of publication: EN

Abstracts

EN

B₄C ceramics were fabricated by spark plasma sintering (SPS) technique with 5 vol.% silicon as sintering additive. Optimization of SPS method production parameters for B₄C ceramics having geometries 50×50×5 mm, square cross section will be performed. The sintering process was carried out at different temperatures by applying 40 MPa of pressure under vacuum atmosphere. The effect of silicon additive, sintering temperature and different soaking times on density, vickers hardness, fracture toughness and microstructure were examined. The mechanical properties of the B₄C ceramics having silicon as additive were compared with the results of monolithic B₄C. The hardness and fracture toughness of the samples were evaluated by the vickers indentation technique. Microstructures of spark plasma sintered B₄C samples with different parameters in square cross section were characterized by using SEM technique.

Keywords

EN

81.20.Ev

Discipline

• 81.20.Ev: Powder processing: powder metallurgy, compaction, sintering, mechanical alloying, and granulation

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2015
• Volume: 127
• Issue: 4
• Pages: 1370-1372

Dates

published

2015-04

Contributors

author

M. Cengiz

• Istanbul Technical University, Metallurgical and Materials Engineering Department, 34469 Maslak, Istanbul, Turkey

author

F. Sahin

• Istanbul Technical University, Metallurgical and Materials Engineering Department, 34469 Maslak, Istanbul, Turkey

References

• [1] F. The'venot, Journal of the European Ceramic Society 6, 205 (1990)
• [2] H. Lee, R.F. Speyer, Journal of the American Ceramic Society 86, 1468 (2003), doi: 10.1111/j.1151-2916.2003.tb03498.x
• [3] B. Yeşilkaya, G. ve Ibişoğlu in: Bor Karbŭr Ŏn Fizibilite Etŭdŭ, ETİ Holding A.Ş. Genel Müdürlüğü, Ankara 2003
• [4] M. Omori, Institute for Materials Research, Tohoku University, Sendai 980-8577, Japan 287, (2000), doi: 10.1016/S0921-5093(00)00773-5
• [5] H.O. Pierson in: Handbook Of Refractory Carbides And Nitrides Properties, Characteristics, Processing and Applications, Consultant and Sandia National Laboratories. New Mexico 1996
• [6] N. Frage, N.L. Levin, M. Frumin, Gelbstein, M.P. Daniel, Journal of Materials Processing Technology 143, 486 (2003)
• [7] F. Ye, Z. Hou, H. Zhang, L. Liu, Journal of American Ceramic Society, 2956 (2010)
• [8] M. Cengiz, B. Yavas, Y. Celik, G. Goller, O. Yucel, F.C. Sahin, Acta Physica Polonica A 125, 260 (2014), doi: 10.12693/APhysPolA.125.260
• [9] S. Hayun, S. Kalabukhov, V. Ezersky, M.P. Dariel, N. Frage, Ceramics International 36, 451 (2010), doi: 10.1016/j.ceramint.2009.09.004
• [10] R.S. Dobedoe, G.D. West, M.H. Lewis, Advances in Applied Ceramics 104, 110 (2005), doi: 10.1179/174367605X16662

Identifiers

DOI

10.12693/APhysPolA.127.1370