Buckling Behaviour of Short Cylindrical Functionally Gradient Polymeric Materials

• Authors: M. Uysal , M. Kremzer
• Languages of publication: EN

Abstracts

EN

In the present study, the buckling behavior of short cylindrical Functionally Gradient Polymeric Materials (FGPMs) was studied. Besides, the structure and graphite distributions of the FGPMs were investigated. Epoxy resin was used as polymeric matrix component and two types of graphite powder materials, PAM96/98 and PV60/65, were selected. Graphite powders were added in quantities of 3, 6, 9, and 12% of volume respectively. Short cylindrical FGPMs samples were manufactured by centrifugal casting method. The structure and graphite distribution of FGPMs samples were investigated by light microscope and image processing program. It was observed that the graphite distribution had varied between the inner and outer diameter. The buckling behavior of short cylindrical FGPMs was analyzed by finite element analysis. The buckling loads of FGPMs samples were predicted.

Keywords

EN

81.05.Qk

Discipline

• 81.05.Qk: Reinforced polymers and polymer-based composites

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2015
• Volume: 127
• Issue: 4
• Pages: 1355-1357

Dates

published

2015-04

Contributors

author

M. Uysal

• Yildiz Technical University, Department of Mechanical Engineering, 34349, Istanbul, Turkey

author

M. Kremzer

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials, 44-100, Gliwice, Poland

References

• [1] M. Koizumi, M. Niino, MRS Bull. 20, 19 (1995)
• [2] H.M. Yim, L.Z. Sun, G.H. Paulino, Acta Mater. 52, 3535 (2004), doi: 10.1016/j.actamat.2004.04.007
• [3] L.H. Yu, C.Y. Wang, AIAA J. 46, 3163 (12), doi: 10.2514/1.37166
• [4] M. Mohammadi, A.R. Saidi, E. Jomehzadeh, Appl. Comp. Mater. 17, 81 (2010), doi: 10.1007/s10443-009-9100-z
• [5] V. Birman, L.W. Byrd, Appl. Mech. Rev. 60, 192 (2007), doi: 10.1115/1.2777164
• [6] V. Birman, Compos. Eng. 5, 913 (1995), doi: 10.1016/0961-9526(95)00036-M
• [7] E. Feldman, J. Aboudi, Compos. Struct. 38, 29 (1997), doi: 10.1016/S0263-8223(97)00038-X
• [8] M. Ganapathi, T. Prakash, N. Sundararajan, J. Eng. Mech. 132, 902 (2006), doi: 10.1061/(ASCE)0733-9399(2006)132:8(902)
• [9] H.S. Shen, T.Y. Chen, Thin Wall. Struct. 12, 321 (1991), doi: 10.1016/0263-8231(91)90032-E
• [10] V.N. Paimushin, Mech. Solid 42, 437 (2007), doi: 10.3103/S0025654407030120
• [11] H.S. Shen, Thin Wall. Struct. 25, 297 (1996), doi: 10.1016/0263-8231(96)00005-5
• [12] H.S. Shen, P. Zhou, T.Y. Chen, Thin Wall. Struct. 15, 43 (1993), doi: 10.1016/0263-8231(93)90012-Y
• [13] P. Khazaeinejad, M.M. Najafizadeh, J. Jenabi, M.R. Isvandzibaei J. Pressure Vessel Technol. 132, 064501 (2010), doi: 10.1115/1.4001659
• [14] D.V. Dung, L.K. Hoa, Thin Wall. Struct. 63, 117 (2013), doi: 10.1016/j.tws.2012.09.010
• [15] J. Stabik, M. Szczepanik, A. Dybowska, Ł . Suchoń, JAMME 38, 56 (2010)
• [16] M. Uslu, M. Kremzer, Int. J. Arts. Sci. 4, 1 (2011)
• [17] M. Uslu, M.Sc. Thesis, Polymeric Matrix Composite Materials Reinforced by Graphite , Erasmus Student, Silesian University of Technolog 2010
• [18] J.C. Halpin, J.L. Kardos, Polym. Eng. Sci. 16, 344 (1976)
• [19] C.L. Tucher III, E. Liang, Comp. Sci. Technol. 59, 655 (1999), doi: 10.1016/S0266-3538(98)00120-1
• [20] T.D. Fornes, D.R. Paul, Polymer 44, 4493 (2003), doi: 10.1016/S0032-3861(03)00471-3
• [21] L.E. Nielsen, R.F. Landel, Mechanical Properties of Polymers and Composites, New York: Marcel Dekker 1994
• [22] W. Mhike, W.W. Focke, J. Vinyl. Addit. Techn. 19, 258 (2013), doi: 10.1002/vnl.21316

Identifiers

DOI

10.12693/APhysPolA.127.1355