PL EN


Preferences help
enabled [disable] Abstract
Number of results
2015 | 127 | 4 | 1355-1357
Article title

Buckling Behaviour of Short Cylindrical Functionally Gradient Polymeric Materials

Authors
Content
Title variants
Languages of publication
EN
Abstracts
EN
In the present study, the buckling behavior of short cylindrical Functionally Gradient Polymeric Materials (FGPMs) was studied. Besides, the structure and graphite distributions of the FGPMs were investigated. Epoxy resin was used as polymeric matrix component and two types of graphite powder materials, PAM96/98 and PV60/65, were selected. Graphite powders were added in quantities of 3, 6, 9, and 12% of volume respectively. Short cylindrical FGPMs samples were manufactured by centrifugal casting method. The structure and graphite distribution of FGPMs samples were investigated by light microscope and image processing program. It was observed that the graphite distribution had varied between the inner and outer diameter. The buckling behavior of short cylindrical FGPMs was analyzed by finite element analysis. The buckling loads of FGPMs samples were predicted.
Keywords
EN
Publisher

Year
Volume
127
Issue
4
Pages
1355-1357
Physical description
Dates
published
2015-04
Contributors
author
  • Yildiz Technical University, Department of Mechanical Engineering, 34349, Istanbul, Turkey
author
  • Silesian University of Technology, Institute of Engineering Materials and Biomaterials, 44-100, Gliwice, Poland
References
  • [1] M. Koizumi, M. Niino, MRS Bull. 20, 19 (1995)
  • [2] H.M. Yim, L.Z. Sun, G.H. Paulino, Acta Mater. 52, 3535 (2004), doi: 10.1016/j.actamat.2004.04.007
  • [3] L.H. Yu, C.Y. Wang, AIAA J. 46, 3163 (12), doi: 10.2514/1.37166
  • [4] M. Mohammadi, A.R. Saidi, E. Jomehzadeh, Appl. Comp. Mater. 17, 81 (2010), doi: 10.1007/s10443-009-9100-z
  • [5] V. Birman, L.W. Byrd, Appl. Mech. Rev. 60, 192 (2007), doi: 10.1115/1.2777164
  • [6] V. Birman, Compos. Eng. 5, 913 (1995), doi: 10.1016/0961-9526(95)00036-M
  • [7] E. Feldman, J. Aboudi, Compos. Struct. 38, 29 (1997), doi: 10.1016/S0263-8223(97)00038-X
  • [8] M. Ganapathi, T. Prakash, N. Sundararajan, J. Eng. Mech. 132, 902 (2006), doi: 10.1061/(ASCE)0733-9399(2006)132:8(902)
  • [9] H.S. Shen, T.Y. Chen, Thin Wall. Struct. 12, 321 (1991), doi: 10.1016/0263-8231(91)90032-E
  • [10] V.N. Paimushin, Mech. Solid 42, 437 (2007), doi: 10.3103/S0025654407030120
  • [11] H.S. Shen, Thin Wall. Struct. 25, 297 (1996), doi: 10.1016/0263-8231(96)00005-5
  • [12] H.S. Shen, P. Zhou, T.Y. Chen, Thin Wall. Struct. 15, 43 (1993), doi: 10.1016/0263-8231(93)90012-Y
  • [13] P. Khazaeinejad, M.M. Najafizadeh, J. Jenabi, M.R. Isvandzibaei J. Pressure Vessel Technol. 132, 064501 (2010), doi: 10.1115/1.4001659
  • [14] D.V. Dung, L.K. Hoa, Thin Wall. Struct. 63, 117 (2013), doi: 10.1016/j.tws.2012.09.010
  • [15] J. Stabik, M. Szczepanik, A. Dybowska, Ł . Suchoń, JAMME 38, 56 (2010)
  • [16] M. Uslu, M. Kremzer, Int. J. Arts. Sci. 4, 1 (2011)
  • [17] M. Uslu, M.Sc. Thesis, Polymeric Matrix Composite Materials Reinforced by Graphite , Erasmus Student, Silesian University of Technolog 2010
  • [18] J.C. Halpin, J.L. Kardos, Polym. Eng. Sci. 16, 344 (1976)
  • [19] C.L. Tucher III, E. Liang, Comp. Sci. Technol. 59, 655 (1999), doi: 10.1016/S0266-3538(98)00120-1
  • [20] T.D. Fornes, D.R. Paul, Polymer 44, 4493 (2003), doi: 10.1016/S0032-3861(03)00471-3
  • [21] L.E. Nielsen, R.F. Landel, Mechanical Properties of Polymers and Composites, New York: Marcel Dekker 1994
  • [22] W. Mhike, W.W. Focke, J. Vinyl. Addit. Techn. 19, 258 (2013), doi: 10.1002/vnl.21316
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv127n4136kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.