PL EN


Preferences help
enabled [disable] Abstract
Number of results
2015 | 127 | 4 | 1164-1166
Article title

Porous Ceramic Supports for Membranes Prepared from Kaolin (DD3) and Calcite Mixtures

Content
Title variants
Languages of publication
EN
Abstracts
EN
The supports for microfiltration (MF) and ultrafiltration (UF) were prepared with local kaolin (Djebel Debagh: type 3: DD3) and calcium carbonate (CaCO₃) mixtures. The choice of these materials is based on their natural abundance (low price). In this work, the tubular ceramic supports were prepared by the extrusion method. The sintering was carried out for 2 hours, at temperatures laying between 1150 and 1300°C. They are then characterized by various techniques: mercury porosimetry, scanning electron microscopy and x-ray diffraction. The obtained results revealed that the main phase formed during the sintering step was anorthite with a minor phase of mullite. Moreover, it has been found that supports sintered at temperatures less than 1300°C had interesting characteristics; an average pore size ranged between 3.91-8.56 μm, a porosity ratio of 42.0-50.4%, a flexural strength ≈67-77 MPa and the pore size distribution is bimodal type. According to their average pore sizes, they may be used either as supports for MF or UF membranes.
Keywords
Contributors
author
  • Ceramics Laboratory, Physics Department, Faculty of Exact Science, Constantine University 1, Constantine 25000, Algeria
author
  • Ceramics Laboratory, Physics Department, Faculty of Exact Science, Constantine University 1, Constantine 25000, Algeria
  • Department of Matter Sciences, Faculty of Exact Science & SNV, Biskra University, Biskra 7000, Algeria
author
  • Ceramics Laboratory, Physics Department, Faculty of Exact Science, Constantine University 1, Constantine 25000, Algeria
author
  • Ceramics Laboratory, Physics Department, Faculty of Exact Science, Constantine University 1, Constantine 25000, Algeria
author
  • Ceramics Laboratory, Physics Department, Faculty of Exact Science, Constantine University 1, Constantine 25000, Algeria
author
  • Ceramics Laboratory, Physics Department, Faculty of Exact Science, Constantine University 1, Constantine 25000, Algeria
author
  • Ceramics Laboratory, Physics Department, Faculty of Exact Science, Constantine University 1, Constantine 25000, Algeria
author
  • Institut Européen des Membranes, UMR 5635 CNRS ENSCM UMII, 1919 Route de Mende, 34293 Montpellier Cedex 5, France
References
  • [1] A. Belouatek, N. Benderdouche, A. Addou, A. Ouagued, N. Bettahar, Microporous and Mesoporous Materials 85, 163 (2005), doi: 10.1016/j.micromeso.2005.06.007
  • [2] F. Bouzerara, A. Harabi, S. Achour, A. Larbot, J. Eur. Cer. Soc. 26, 1663 (2006), doi: 10.1016/j.jeurceramsoc.2005.03.244
  • [3] S. Masmoudi, R. Ben Amar, A. Larbot, H. El Feki, A. Ben Salah, L. Cot, J. Membr. Sci. 247, 1 (2005), doi: 10.1016/j.memsci.2004.03.047
  • [4] T.V. Gestel, C. Vandecasteele, A. Buekenhoudt, C. Dotremont, J. Luyten, R. Leysen, J. Membr. Sci. 207, 73 (2002)
  • [5] G.E. Romanos, Th.A. Steriotis, E.S. Kikkinides, N.K. Kanellopoulos, V. Kasseelouri, J. Eur. Ceram. Soc. 21, 119 (2001)
  • [6] S.H. Zhong, C.F. Li, X.F. Xiao, J. Membr. Sci. 199, 53 (2002)
  • [7] N. Saffaj, S.A. Younssi, A. Albizane, A. Messouadi, M. Bouhria, M. Persin, Desalination 168, 259 (2004), doi: 10.1016/j.desal.2004.07.006
  • [8] T. Mohammadi, A. Pak, Sep. Purif. Technol. 30, 241 (2003)
  • [9] A. Harabi, S. Achour, J. Mater. Sci. Lett. 18, 955 (1999)
  • [10] M.R. Boudchicha, S. Achour, A. Harabi, J. Mater. Sci. Lett. 20, 215 (2001)
  • [11] A. Mecif, J. Soro, J.P. Bonnet, A. Harabi, J. Am. Ceram. Soc. 93, 1306 (2010)
  • [12] S. Achour, A. Harabi, N. Tabet, Mater. Sci. and Eng. B 42, 289 (1996)
  • [13] O. Toumiat, S. Achour, A. Harabi, N. Tabet, M. Boumaour, M. Maallemi, Nanotechnology 17, 658 (2006)
  • [14] O. Bourbia, S. Achour, N. Tabet, M. Parlinska, A. Harabi, Thin Solid Films 515, 6758 (2007), doi: 10.1016/j.tsf.2007.02.055
  • [15] A. Harabi, F. Bouzerara, S. Condom, Des. Wat. Treat. 6, 222 (2009)
  • [16] F. Bouzerara, A. Harabi, S. Condom, Des. Wat. Treat. 12, 415 (2009)
  • [17] A. Harabi, A. Guechi, S. Condom, Procedia Engineering 33, 220 (2012), doi: 10.1016/j.proeng.2012.01.1197
  • [18] A. Harabi, F. Zenikheri, B. Boudaira, F. Bouzerara, A. Guechi, L. Foughali, J. Eur. Ceram. Soc. 34, 1329 (2014), doi: 10.1016/j.jeurceramsoc.2013.11.007
  • [19] F.Z. Mezahi, H. Oudadesse, A. Harabi, A. Lucas-Girot, Y. Le Gal, H. Chaair, G. Cathelineau, J. Therm. Anal. Calorim. 95, 21 (2009)
  • [20] F.Z. Mezahi, H. Oudadesse, A. Harabi, J. Appl. Ceram. Technol. 9, 529 (2012), doi: 10.1111/j.1744-7402.2011.02742.x
  • [21] A. Harabi, S. Chehlatt, J. Therm. Anal. Calorim. 111, 203 (2013), doi: 10.1007/s10973-012-2242-5
  • [22] A. Harabi, S. Zouai, Int. J. Appl. Ceram. Technol. 11, 31 (2014), doi: 10.1111/ijac.12047
  • [23] A. Harabi, D. Belamri, N. Karboua, F.Z. Mezahi, J. Therm. Anal. Calorim. 104, 283 (2011), doi: 10.1007/s10973-010-1115-z
  • [24] A. Lucas-Girot, F.Z. Mezahi, M. Mami, H. Oudadesse, A. Harabi, M. Le Floch, Journal of Non-Crystalline Solids 357, 3322 (2011), doi: 10.1016/j.jnoncrysol.2011.06.002
  • [25] F.Z. Mezahi, A. Lucas-Girot, H. Oudadesse, A. Harabi, Journal of Non-Crystalline Solids 361, 111 (2013), doi: 10.1016/j.jnoncrysol.2012.10.013
  • [26] S. Kitouni, A. Harabi, Cerâmica 57, 453 (2011)
  • [27] F. Bouzerara, A. Harabi, B. Ghouil, N. Medjemem, B. Boudaira, S. Condom, Procedia Engineering 33, 78 (2012), doi: 10.1016/j.proeng.2012.01.1205
  • [28] S. Khemakhem, R. Ben Amar, R. Ben Hassen, A. Larbot, M. Medhioub, A. Ben Salah, L. Cot, Desalination 167, 19 (2004), doi: 10.1016/j.desal.2004.06.108
  • [29] Y. Anbri, N. Tijani, J. Coronas, E. Mateo, M. Menéndez, J. Bentama, Desalination 221, 419 (2008), doi: 10.1016/j.desal.2007.01.101
  • [30] N. Saffaj, S.A. Younssi, M. Persin, M. Persin, M. Cretin, A. Albi, A. Larbot, Ceram. Int. 31, 205 (2005), doi: 10.1016/j.ceramint.2004.05.001
  • [31] S.H. Lee, K.C. Chung, M.C. Shin, J.I. Dong, H.S. Lee, K.H. Auh, Mater. Lot. 52, 266 (2002)
  • [32] S. Rakib, M. Sghiar, M. Rafik, D. Cot, A. Larbot, L. Cot, Ann. Chim. Sci. Mat. 25, 567 (2000)
  • [33] S. Masmoudi, A. Larbot, H. El Feki, R. Ben Ama, Desalination 190, 89 (2006), doi: 10.1016/j.desal.2005.03.097
  • [34] B. Boudaira, A. Harabi, F. Bouzerara, S. Condom, Des. Wat. Treat. 9, 142 (2009)
  • [35] F. Bouzerara, S. Boulanacer, A. Harabi, B. Boudaira, S. Achour, S. Condom, Physics Procedia 2, 1449 (2009), doi: 10.1016/j.phpro.2009.11.115
  • [36] S.J.G. Sousa, J.N.F. Holanda, Materials Research 8, 197 (2005)
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv127n4084kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.