PL EN


Preferences help
enabled [disable] Abstract
Number of results
2015 | 127 | 4 | 1145-1149
Article title

Investigation of Grooved Circular Jet Flow Experimentally and Using Computational Fluid Dynamics

Authors
Content
Title variants
Languages of publication
EN
Abstracts
EN
This study is the investigation of grooved circular jet flow experimentally and using computational fluid dynamics (CFD). Experimental studies were conducted by using straight circular and grooved circular tubes in a multi-purpose low-range subsonic wind tunnel. Single channel hot wire anemometer was used in turbulence measurements. Numerical studies for the solution of jet flow were performed through FLUENT program (ANSYS 14.5). Jet flow profiles at different velocities were formed by using the data generated at predetermined stations in the experiment room for the straight circular tubes and grooved circular tubes. After transferring the experimental data to Fluent, jet exit points of the circular tubes were placed in the quarter model to coincide with the initial coordinates of experimental room. CFD Calculations were done by implementing different velocities in the experimental room and the jet. Jet flow structures obtained from both computational and experimental calculations are shown in graphs and the data is presented in Tables. The obtained parameters are as follows: axis velocity (U_{e}), root mean square velocity (U_{rms}), turbulence velocity (U_{turb}), jet half width (b) and Reynolds numbers (Re_{D} and Re_{b}). These parameters were calculated with reference to jet radius and jet half width. Graphics formed by the generated non-dimensional data were compared to the previous studies.
Keywords
Contributors
author
  • Technology Faculty, Mechanical Engineering Department, Marmara University, Göztepe Kampüsü 34722 Istanbul, Turkey
author
  • M.U. Vocational School Of Technical Sciences, Machinery And Metal Technology Dept., Göztepe Kampüsü 34722 Istanbul, Turkey
References
  • [1] T. Sisman, Master Thesis, Marmara University, Turkey 2013
  • [2] J.O. Hinze, Turbulence, McGraw Hill, Newyork, USA, 1959
  • [3] S. Corrsin, N.A.C.A., Wartime Report, 1946
  • [4] J.O. Hinze, B.G. Van Der Hegge Zijnen, Appl. Sci. Res. 1, 435 (1949), doi: 10.1007/BF02120346
  • [5] M.L. Albertson, Y.B. Dai, R.A. Jensen, H. Rouse, Am. Soc. Civil Eng. 115, 639 (1950)
  • [6] I. Wygnanski, H. Fiedler, J. Fluid Mech. 38, 577 (1969)
  • [7] P.O.A.L. Davies, M.J. Fisher, Proc. Roy. Soc. A 280, 486 (1964)
  • [8] P. Bradshaw, Experimental Fluid Mechanics, Pergamon Press, Oxford, UK 1964
  • [9] H.J. Hussein, W.K. George, 7th. Symposium on Turbulent Shear Flows 2, 7 (1989)
  • [10] D.B. Taulbee, H. Hussein, S. Capp, 6th Symposium on Turbulent Shear Flows, Toulouse, France (1987)
  • [11] S. Corrsin, N.A.C.A., Wartime Report, 1942
  • [12] S. Corrsin, M. Uberoi, N.A.C.A., TN 1865, 1949
  • [13] W. Rodi, Ph.D. Thesis, Imperial College, London, 1972
  • [14] P.J. Morris, K.B.M.Q. Zaman, J. Sound Vib. 329, 394 (2010), doi: 10.2514/6.2009-17
  • [15] S. Sivakumar, R. Sangras, V. Raghavan, World Academy of Science, Engineering & Technology 6, 119 (2012)
  • [16] http://www.sarkuysan.com/tr-TR/bakir-boru/88.aspx, 2011
  • [17] H. Kayıkçı, Master Thesis, Master Thesis University of Marmara Istanbul, Turkey, 2006
  • [18] A.T. Inan, Ph.D. Thesis, University of Marmara, Istanbul, Turkey, 2002
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv127n4080kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.