Preferences help
enabled [disable] Abstract
Number of results
2015 | 127 | 4 | 1121-1123
Article title

Effect of CBC and G-POSS on Tribological Behaviour of Polyamide 6 and Short Glass Fiber Reinforced Polyamide 6 Composites

Title variants
Languages of publication
In this study, effect of glycidylisobutyl oligomeric silsesquioxane (G-POSS) and 1.1'-carbonyl-bis-caprolactam (CBC) (1 wt.%) on the friction and wear performance of polyamide 6 (PA6) and short glass fiber (SGF) (10 and 20 wt.%) reinforced PA6 composites were investigated. Adhesive wear tests were carried out by using a tribometer in block-on-ring configuration (ASTM G77), in sliding conditions, without lubricants and in air. Tests were carried out at sliding speed of 1.6 m/s (511 rpm) and applied load values of 25, 50 and 75 N. Wear rate was calculated using weight loss per unit sliding distance. The results showed that, the friction force increases with the increasing load. It was found that the wear resistance of PA6 improved considerably after doping with CBC.
  • Kocaeli University, Mechanical Engineering Department, Umuttepe Campus, 41380 Izmit, Turkey
  • Kocaeli University, Ali Rıza Veziroğlu Vocational High School, Arslanbey Campus,41285 Izmit, Turkey
  • Kocaeli University, Mechanical Engineering Department, Umuttepe Campus, 41380 Izmit, Turkey
  • [1] S.N. Kukureka, C.J. Hooke, M. Rao, P. Liao, Y.K. Chen, Tribology International 32, 107 (1999), doi: 10.1016/S0301-679X(99)00017-1
  • [2] S.S. Kim, M.W. Shin, H. Jang, Wear 274-275, 34 (2012), doi: 10.1016/j.wear.2011.08.009
  • [3] H. Unal, A. Mimaroglu, Wear 289, 132 (2012), doi: 10.1016/j.wear.2012.04.004
  • [4] Y.-L. You, D.-X. Li, G.-J. Si, X. Deng, Wear 311, 57 (2014), doi: 10.1016/j.wear.2013.12.018
  • [5] E. Basavaraj, B. Ramaraj, J.-H. Lee, Siddaramaiah, Materials Chemistry and Physics 138, 658 (2013), doi: 10.1016/j.matchemphys.2012.12.035
  • [6] M.T. Demirci, H. Duzcukoglu, Materials and Design 57, 560 (2014), doi: 10.1016/j.matdes.2014.01.013
  • [7] L. Chang, Z. Zhang, H. Zhang, A.K. Schlarb, Composites Science and Technology 66, 3188 (2006), doi: 10.1016/j.compscitech.2005.02.021
  • [8] G. Srinath, R. Gnanamoorthy, Composites Science and Technology 67, 399 (2007), doi: 10.1016/j.compscitech.2006.09.004
  • [9] H. Meng, G.X. Sui, G.Y. Xie, R. Yang, Composites Science and Technology 69, 606 (2009), doi: 10.1016/j.compscitech.2008.12.004
  • [10] J. Li, Current Applied Physics 9, 1445 (2009), doi: 10.1016/j.cap.2009.03.020
  • [11] J.W. Kim, H. Jang, J.W. Kim, Wear 309, 82 (2014), doi: 10.1016/j.wear.2013.11.007
Document Type
Publication order reference
YADDA identifier
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.