Wear Properties of TIG Surface Alloyed Steel with 50%Fe-10%W-40%B Alloy

• Authors: E. Abakay , B. Kilinc , S. Sen , U. Sen
• Languages of publication: EN

Abstracts

EN

In the present study, AISI 1020 plain carbon steel was surface alloyed with preplaced 50%Fe-10%W-40%B alloying powders using a tungsten-inert gas (TIG) heat source. Microstructure, hardness, and wear resistance of the surface alloyed layer were investigated. Following the surface alloying, conventional characterization techniques such as optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and X-ray diffraction analysis (XRD) were used to study the phase and microstructural examinations of the alloyed surfaces. Hardness measurements were performed across the alloyed zones, and wear properties of the alloyed surfaces were evaluated using a ball-on-disc wear test method. Hardness values of the phases formed in the alloyed layer are changing between 620±30 HV_{0.1} and 2095±254 HV_{0.1}. The major phases formed in the surface alloyed layer were Fe₂B, FeB and FeW₂B₂. Wear test were realized against Alumina ball under the loads of 2.5 N, 5 N and 10 N at the sliding speed of 0.1 m/s for 250 m sliding distance. The friction coefficient of the 50%Fe-10%W-40%B alloyed steel surface is changing between 0.70 and 0.79 depending on applied loads. The wear rates of the surface alloyed steel ranged from 4.01×10^{-5} mm³/m to 4.14×10^{-4} mm³/m.

Keywords

EN

81.20.Vj; 81.05.Bx; 81.40.Pq; 81.65.Lp

Discipline

• 81.20.Vj: Joining; welding
• 81.40.Pq: Friction, lubrication, and wear
• 81.05.Bx: Metals, semimetals, and alloys
• 81.65.Lp: Surface hardening: nitridation, carburization, carbonitridation

• Publisher: Institute of Physics, Polish Academy of Sciences
• Journal: Acta Physica Polonica A
• Year: 2015
• Volume: 127
• Issue: 4
• Pages: 957-960

Dates

published

2015-04

Contributors

author

E. Abakay

• Sakarya University Engineering Faculity, Department of Metallurgy and Material Engineering, 54187, Serdivan Sakarya, Turkey

author

B. Kilinc

• Sakarya University, Arifiye Vocational High School, 54580, Arifiye Sakarya, Turkey

author

S. Sen

• Sakarya University Engineering Faculity, Department of Metallurgy and Material Engineering, 54187, Serdivan Sakarya, Turkey

author

U. Sen

• Sakarya University Engineering Faculity, Department of Metallurgy and Material Engineering, 54187, Serdivan Sakarya, Turkey

References

• [1] S. Stadler, R.P. Winarski, J.M. MacLaren, D.L. Ederer, J. vanEk, A. Moewes, M.M. Grush, T.A. Callcott, R.C.C. Perera, Journal of Electron Spectroscopy and Related Phenomena 110, 75 (2000), doi: 10.1016/S0368-2048(00)00158-4
• [2] M. Usta, I. Ozbek, M. Ipek, C. Bindal, A.H. Ucisik, Surface and Coatings Technology 194, 330 (2005), doi: 10.1016/j.surfcoat.2004.06.042
• [3] M.F. Buchely, J.C. Gutierrez, L.M. León, A. Toro, Wear 259, 52 (2005), doi: 10.1016/j.wear.2005.03.002
• [4] S.M.H. Hojjatzadeh, A. Halvaee, M. Heydarzadeh Sohi, Journal of Materials Processing Technology 212, 2496 (2012), doi: 10.1016/j.jmatprotec.2012.06.006
• [5] V. Balasubramanian, R. Varahamoorthy, C.S. Ramachandran, C. Muralidharan, The International Journal of Advanced Manufacturing Technology 40, 887 (2009), doi: 10.1007/s00170-008-1406-8
• [6] J.C. Oh, S. Lee, Surface and Coatings Technology 179, 340 (2004), doi: 10.1016/S0257-8972(03)00811-9
• [7] A. d'Oliveira, R.S.C. Paredes and R.L.C. Santos, Journal of Materials Processing 171, 167 (2006), doi: 10.1016/j.jmatprotec.2005.02.269
• [8] P.W. Leech, Materials and Design 54, 539 (2013), doi: 10.1016/j.matdes.2013.08.060
• [9] R.A. Jeshvaghani, M. Jaberzadeh, H. Zohdi, M. Shamanian, Materials and Design 54, 491 (2013), doi: 10.1016/j.matdes.2013.08.059
• [10] D. Deng, Y. Zhou, T. Bi, X. Liu, Materials and Design 52, 720 (2013), doi: 10.1016/j.matdes.2013.06.013
• [11] S. Buytoz, Surface and Coatings Technology 200, 3734 (2006), doi: 10.1016/j.surfcoat.2005.01.106
• [12] B. Stingl, M. Ciavarella, N. Hoffmann, International Journal of Mechanical Sciences 72, 55 (2013), doi: 10.1016/j.ijmecsci.2013.03.012
• [13] V. Raghavan, Journal of Phase Equilibria 24, 457 (2003), doi: 10.1361/105497103770330154
• [14] O. Ozdemir, M. Usta, C. Bindal and A.H. Ucisik, Vacuum 80, 1391 (2006), doi: 10.1016/j.vacuum.2006.01.022
• [15] I. Campos, M. Palomar, A. Amador, R. Ganem and J. Martinez, Surface and Coatings Technology 201, 2438 (2006), doi: 10.1016/j.surfcoat.2006.04.017

Identifiers

DOI

10.12693/APhysPolA.127.957