PL EN


Preferences help
enabled [disable] Abstract
Number of results
2015 | 127 | 4 | 928-930
Article title

Improved Transresistance Characteristics of Inductance-gate Type SFFT Using AFM Lithography

Authors
Content
Title variants
Languages of publication
EN
Abstracts
EN
An atomic force microscope (AFM) was used to locally anodize the serial channels of an inductance-gate type superconducting flux flow transistor (SFFT) as narrow slits with a width of 50 μm, a space of 25 μm, and 12 turns, to improve the transresistance value. Among the serial channels that were anodized with the scanning tip of the AFM in the drain current line, channels 1 and 2 were 7.3 and 7.9 μm wide, and 531 and 461 nm high, respectively. The critical current density in the serial channel of the fabricated SFFT, which was determined using an AFM modification method, was decreased by increasing the gate current. The measured current-voltage curves were compared with the simulated ones. The maximum transresistance value was 0.56 Ω at the drain current of 20 mA when the gate current was 6 mA. The transresistance characteristics of the inductance-gate type SFFT could be more improved than that of the single-channel type SFFT using an inductively coupled plasma lithography method
Keywords
Contributors
author
  • Industry-University Cooperation Foundation, Kongju National University, Chungnam, 314-701, Republic of Korea
References
  • [1] H. Manoharan, C.P. Lutz, D.M. Eigler, Nature 403, 512 (2000), doi: 10.1038/35000508
  • [2] R.D. Piner, J. Zhu, F. Xu, F. Hong, C. Mirkin, Science 283, 661 (1999), doi: 10.1126/science.283.5402.661
  • [3] H.C. Shin, J.T. Song, Elect. Mater. Lett. 7, 265 (2011), doi: 10.1007/s13391-011-0916-y
  • [4] S. Kim, J.W. Jung, T.S. Lee, J.H. Jeong, S.Y. Lee, S.M. Yang, J.R. Jeong, Elect. Mater. Lett. 8, 71 (2012), doi: 10.1007/s13391-011-0950-9
  • [5] K. Matsumoto, Proceedings of the IEEE 85, 612 (1997), doi: 10.1109/5.573745
  • [6] S.M. Kim, S.J. Ahn, H. Lee, E.R. Kim, H. Lee, Ultramicroscopy 91, 165 (2002), doi: 10.1016/S0304-3991(02)00096-7
  • [7] J.A. Dagata, J. Schneir, H.H. Harary, C.J. Evans, M.T. Postek, J. Bennett, Appl. Phys. Lett. 56, 2001 (1990), doi: 10.1063/1.102999
  • [8] H.G. Kang, S.K. Kim, H. Lee, Surface Sci. 600, 3673 (2006), doi: 10.1016/j.susc.2006.02.060
  • [9] S. Ko, S.J. Kim, Physica C 466, 16 (2007), doi: 10.1016/j.physc.2007.05.026
  • [10] S. Ko. S.J. Kim, Current Appl. Phys. 9, s35 (2009), doi: 10.1016/j.cap.2008.08.026
  • [11] J.S. Martens, D.S. Ginley, J.B. Beyer, J.E. Nordman, G.K.G. Hohenwarter, IEEE Trans. Magn. 27, 3284 (1991), doi: 10.1109/20.133914
  • [12] K. Miyahara, S. Kubo, M. Suzuki, J. Appl. Phys. 76, 4772 (1994), doi: 10.1063/1.357248
  • [13] M. Kusunoki, H. Akaike, A. Fujimaki, H. Hayakawa, IEEE Trans. Appl. Supercon. 5, 3389 (1995), doi: 10.1109/77.403319
  • [14] H.G. Kang, Y.H. Im, S. Ko, S.H. Lim, B.S. Han, Y.B. Hahn, Physcia C 400, 111 (2004), doi: 10.1016/j.physc.2003.07.004
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv127n4015kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.