PL EN


Preferences help
enabled [disable] Abstract
Number of results
2015 | 127 | 4 | 921-924
Article title

Application of Taguchi Method to Investigate the Effect of Nucleus Diameter on Mechanical Properties of Automotive Sheets in Electrical Resistance Spot Welding

Authors
Content
Title variants
Languages of publication
EN
Abstracts
EN
In this study, the effects of nucleus diameter on tensile-peel strength in electrical resistance spot welding were investigated. Taguchi design approach has been employed to the experimental planning, the L_{27}(3^{13}) orthogonal array. The larger-the-better and the nominal-the-best response criteria were selected to obtain the optimum conditions for nucleus diameter and tensile-peel strength, respectively. In addition, the effects of five parameters, electrode pressure, clamping time, welding current, welding time, and holding time, were examined in this way. Results showed that the tensile-peel strength was related with nucleus diameter, and that welding current and welding time were the most effective parameters for improvement of the strength of weld joints.
Keywords
EN
Publisher

Year
Volume
127
Issue
4
Pages
921-924
Physical description
Dates
published
2015-04
Contributors
author
  • Yildiz Technical University, Naval Architecture and Maritime Faculty, 34349, İstanbul, Turkey
References
  • [1] M. Vural, A. Akkus, Journal of Materials Processing Technology 153, 1 (2004), doi: 10.1016/j.jmatprotec.2004.04.063
  • [2] S. Aslanlar, A. Ogur, U. Ozsarac, E. Ilhan, Z. Demir, Materials and Design 28, 2 (2007), doi: 10.1016/j.matdes.2005.06.022
  • [3] S. Aslanlar, Materials and Design 27, 125 (2006), doi: 10.1016/j.matdes.2004.09.025
  • [4] M. Vural, A. Akkus, B. Eryurek, Journal of Materials Processing Technology 176, 127 (2006), doi: 10.1016/j.jmatprotec.2006.02.026
  • [5] L. Yi, L. Jinhe, X. Huibin, X. Chengzhi, L. Lin, Materials and Design 30, 2547 (2009), doi: 10.1016/j.matdes.2008.09.031
  • [6] A.G. Thakur, T.E. Rao, M.S. Mukhedkar, V.M. Nandedkar, ARPN Journal of Engineering and Applied Sciences 5, 22 (2010)
  • [7] U. Eşme, The Arabian Journal for Science and Engineering 34, 519 (2009)
  • [8] N. Akkas, F. Varol, E. Ferik, E. Ilhan, U. Ozsarac, S. Aslanlar, Acta Physica Polonica A 125, 500 (2014), doi: 10.12693/AphysPolA.125.500
  • [9] N. Akkas, E. Ilhan, Acta Physica Polonica A 125, 497 (2014), doi: 10.12693/AphysPolA.125.497
  • [10] P.J. Ross, Taguchi Techniques for Quality Engineering, Loss Function, Orthogonal Experiments, Parameter and Tolerance Design, McGraw-Hill Inc., New York, 1988
  • [11] R.H. Lochner, J.E. Matar, Designing For Quality An Introduction to the Best of Taguchi and Western Methods of Statistical Experimental Design, Chapman and Hall, London, 1990
  • [12] S. Aslanlar, A. Ogur, U. Ozsarac, E. Ilhan, Materials and Design 29, 1427 (2008), doi: 10.1016/j.matdes.2007.09.004
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv127n4013kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.