PL EN


Preferences help
enabled [disable] Abstract
Number of results
2015 | 127 | 4 | 917-920
Article title

In Situ Formation of Ti-TiAl₃ Metallic-Intermetallic Composite by Electric Current Activated Sintering Method

Content
Title variants
Languages of publication
EN
Abstracts
EN
In this study we have investigated fabrication of in situ metallic- intermetallic Ti-TiAl₃ composites from powder mixture containing 40 wt % Ti-Al, 50 wt % Ti-Al and 60 wt % Ti-Al by electric current activated sintering method. Powder mixtures without additive were compressed uniaxially under 130 MPa of pressure and sintered 2000 A current for 20 minutes in a steel mould. Microstructures of sintered samples were investigated by optic and scanning electron microscopes, phases in samples were analyzed by XRD and their hardness was measured by Vickers hardness tester. Optic and scanning electron microscopes investigations showed that microstructures of samples were consisting of two components: Main component was titanium aluminide and other was metallic titanium. Besides this there was a trace amount of aluminium oxide in the sintered body. XRD analyses also demonstrated that main phase is TiAl₃. It was determined that as weight percentage of titanium in the mixture was decreasing, also the amount of metallic titanium has decreased in the sintered body. Additionally, average hardness values of samples were about 500 HV
Keywords
EN
Contributors
author
  • Sakarya University, Engineering Faculty, Department of Metallurgy and Materials Engineering, Esentepe Campus, Serdivan, Sakarya, Turkey
author
  • Sakarya University, Engineering Faculty, Department of Metallurgy and Materials Engineering, Esentepe Campus, Serdivan, Sakarya, Turkey
author
  • Sakarya University, Engineering Faculty, Department of Metallurgy and Materials Engineering, Esentepe Campus, Serdivan, Sakarya, Turkey
References
  • [1] P.Y. Wang, H.J. Li, L.H. Qi, X.H. Zeng, H.S. Zuo, Progress in Natural Science: Materials International 21, 153 (2011), doi: 10.1016/S1002-0071(12)60049-5
  • [2] K. Zhang, Z. Li, W. Gao, Materials Letters 57, 834 (2002), doi: 10.1016/S0167-577X(02)00882-0
  • [3] Y.B. Sun, Y.Q. Zhao, D. Zhang, C.Y. Liu, H.Y. Diao, C.L. Ma, Transactions of Nonferrous Metals Society of China 21, 1722 (2011), doi: 10.1016/S1003-6326(11)60921-7
  • [4] T. Matsubara, T. Shibutani, K. Uenishi, K.F. Kobayashi, Materials Science and Engineering: A 329, 84 (2002), doi: 10.1016/S0921-5093(01)01555-6
  • [5] J. Geng, G. Gantner, P. Oelhafen, P. Datta, Applied Surface Science 158, 64 (2000), doi: 10.1016/S0169-4332(99)00583-8
  • [6] S. Vaucher, M. Stir, K. Ishizaki, J.M. Catala-Civera, R. Nicula, Thermochimica Acta 522, 151 (2011), doi: 10.1016/j.tca.2010.11.026
  • [7] H. Xu, L. Meng, J. Xu, Y. Li, X. Zhao, Intermetallics 15, 778 (2007), doi: 10.1016/j.intermet.2006.10.005
  • [8] R. Reddy, A. Yahya, L. Brewer, Journal of alloys and compounds 321, 223 (2001), doi: 10.1016/S0925-8388(01)00972-0
  • [9] Y. Duan, Y. Sun, L. Lu, Computational Materials Science 68, 229 (2013), doi: 10.1016/j.commatsci.2012.11.012
  • [10] L. Peng, H. Li, J. Wang, Materials Science and Engineering: A 406, 309 (2005), doi: 10.1016/j.msea.2005.06.067
  • [11] Z.C. Schuster, M. Palm, Basic and Apllied Research: Section 1 27, 255 (2006), doi: 10.1361/154770306X109809
  • [12] R. Orru, R. Licheri, A.M. Locci, A. Cincotti, G. Cao, Materials Science and Engineering: R: Reports 63, 127 (2009), doi: 10.1016/j.mser.2008.09.003
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv127n4012kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.