PL EN


Preferences help
enabled [disable] Abstract
Number of results
2014 | 126 | 2 | 512-515
Article title

Characterization of Rapidly Solidified Al_{65}Cu_{20}Fe_{15} Alloy in Form of Powder or Ribbon

Content
Title variants
Languages of publication
EN
Abstracts
EN
The Al_{65}Cu_{20}Fe_{15} alloy has been prepared by conventional casting to the mould and by melt spinning or atomisation techniques. The melt spun ribbon was in the form of fragmented, brittle flakes, atomized powder has spherical shape with average size 17.2 μm. It was found that icosahedral I-phase was the main phase in all types of prepared samples. In the conventionally cast alloy the following phases have been identified additionally: λ-Al_{13}Fe_4, τ-AlCu(Fe) and η_2-AlCu. In the melt-spun ribbon the formation of η_2 is avoided, while in the atomised powder the I-phase coexists with small amount of copper rich τ-phase. In the cast ingot the I-phase form as a product of peritectic reaction λ + L, while in the ribbon and in the powder quasicrystal solidified from the undercooled melt as primary phase and next metastable cubic τ-AlCu(Fe) was formed at the interdendritic areas. Single I-phase grains of the sizes about 1 μm are observed in the ribbon close to the wheel side.
Keywords
Contributors
  • Institute of Metallurgy and Materials Science, Polish Academy of Sciences, W.S. Reymonta 25, 30-059 Kraków, Poland
author
  • Institute of Metallurgy and Materials Science, Polish Academy of Sciences, W.S. Reymonta 25, 30-059 Kraków, Poland
  • Institute of Metallurgy and Materials Science, Polish Academy of Sciences, W.S. Reymonta 25, 30-059 Kraków, Poland
author
  • Université de Technologie de Belfort-Montbeliard, Site de Sevenans, 90010, Belfort, France
author
  • Université de Technologie de Belfort-Montbeliard, Site de Sevenans, 90010, Belfort, France
author
  • Institut de Chimie et des Matériaux Paris Est, CNRS-Université Paris XII, 2-8 rue Henri Dunant, 94320 Thiais, France
References
  • [1] E. Huttunen-Saaivirta, J. Alloys Comp. 363, 150 (2004), doi: 10.1016/S0925-8388(03)00445-6
  • [2] J.M. Dubois, Chem. Soc. Rev. 41, 6760 (2012), doi: 10.1039/c2cs35110b
  • [3] M. Quiquandon, A. Quivy, J. Devaud, F. Faudot, S. Lefebvre, M. Bessière, Y. Calvayrac, J. Phys., Condens. Matter 8, 2487 (1996), doi: 10.1088/0953-8984/8/15/002
  • [4] L. Zhang, R. Lück, J. Alloys Comp. 342, 53 (2002), doi: 10.1016/S0925-8388(02)00133-0
  • [5] M. Surowiec, W. Bogdanowicz, J. Krawczyk, B. Formanek, M. Sozanska, Philos. Mag. 91, 2458 (2011), doi: 10.1080/14786435.2010.528460
  • [6] L. Zhang, R. Lück, Z. Metallkd. 94, 774 (2003)
  • [7] S.M. Lee, H.J. Jeon, B.H. Kim, W.T. Kim, D.H. Kim, Mater. Sci. Eng. A 304-306, 871 (2001), doi: 10.1016/S0921-5093(00)01625-7
  • [8] A.P. Tsai, A. Inoue, T. Masumoto, J. Mater. Sci. Lett. 6, 1403 (1987), doi: 10.1007/BF01689302
  • [9] B. Avar, M. Gogebakan, F. Yilmaz, Z. Kristallogr. 223, 731 (2008), doi: 10.1524/zkri.2008.1077
  • [10] E. Huttunen-Saarivita, J. Vuorinen, Intermetallics 13, 885 (2005), doi: 10.1016/j.intermet.2005.02.004
  • [11] F. Faudot, A. Quivy, Y. Calvayrac, D. Gratias, M. Harmelin, Mater. Sci. Eng. A 133, 383 (1991), doi: 10.1016/0921-5093(91)90093-3
  • [12] Y.L. Cheung, K.C. Chan, Y.H. Zhu, Mater. Charact. 47, 299 (2001), doi: 10.1016/S1044-5803(02)00182-1
  • [13] M.A. Suárez, R. Esquivel, J. Alcántara, H. Dorantes, J.F. Chávez, Mater. Charact. 62, 917 (2011), doi: 10.1016/S1044-5803(02)00182-1
  • [14] E.V. Shalaeva, N.I. Medvedeva, Philos. Mag. 92, 1649 (2012), doi: 10.1080/14786435.2011.652986
  • [15] G. Rosas, J. Reyes-Gasga, R. Perez, Mater. Charact. 58, 765 (2007), doi: 10.1016/j.matchar.2006.12.004
Document Type
Publication order reference
Identifiers
YADDA identifier
bwmeta1.element.bwnjournal-article-appv126n222kz
JavaScript is turned off in your web browser. Turn it on to take full advantage of this site, then refresh the page.